• 센서학회지
• /
• 제12권6호
• /
• pp.258-264
• /
• 2003

본 연구에서는 영상처리를 통한 부액계의 교정방법을 연구한다. 이 방법은 부액계를 교정하기 위해 선정된 부액계의 측정눈금과 기준액체의 수평면을 교정자의 조작 없이 자동으로 일치시킨다. 이 시스템은 CCD카메라, frame grabber, 스텝모터, 영상처리를 포함한 시스템프로그램으로 구성된다. 영상처리프로그램은 부액계의 측정눈금부위와 기준액체의 수평면사이에서 발생하는 메니스커스를 검색하여 눈금을 일치시키는 부분과 스텝모터를 제어하는 부분으로 구성한다. 본 연구에서 개발한 시스템의 성능을 검증하기 위하여 교정자의 눈으로 직접 메니스커스와 측정눈금을 관측한 수동교정방법의 교정결과와 비교한다 각각의 교정값의 차이가 $0.004\;kg/m^3$ 이하로서 교정값의 측정 불확도 $0.06\;kg/m^3$을 고려하면 두 방법의 교정결과가 거의 같은 연구결과를 얻었다.

• 전자공학회논문지A
• /
• 제33A권2호
• /
• pp.131-139
• /
• 1996

Inthis apper wa analyzed the channel-hot-electron programming characteristics of the single-poly EEPROM with different control gate and drain structures. The single-poly EEPROM uses the p$^{+}$/n$^{+}$-diffusion in the n-well as a control gate instead of the second poly-silicon. The program and erase characteristics of the single-poly EEPROM were verified using the two-dimensional device simulator, MEDICI. The single-poly EEPROM was fabricated using 0.8$\mu$m ASIC CMOS process, and its CHE programming characteristics were measured using HP4155 parameteric analyzer and HP8110 pulse gnerator. Especially we investigated the CHE programming characteristics of the single-poly EEPROM with the p$^{+}$-diffusion or n$^{+}$-diffusion in the n-well as a control gate and the LDD or single-drain structure. The single-poly EEPROM with p$^{+}$-diffusion in the n-well as a control gate and single-drain structure was programmed to about VT$\thickapprox$5V with VDS=6V, VCG=12V(1ms pulse width).th).

• 방사선산업학회지
• /
• 제6권3호
• /
• pp.231-237
• /
• 2012

This paper introduces a gamma-ray measurement system for a transportable tomography which is applicable for an industrial process diagnosis. The gamma-ray measurement system consists of pulse mode operating 72 channel CsI detectors, main AMP-pulse shaper, single channel analyzer, counter and control PC. The CsI crystal is coupled with a PIN diode which is connected to an amplifier and pulse shaper. For a compact design, the amplifier and pulse shaping circuit are included in a single package. 36 sets of CsI detectors are connected to a multi-channel counter through single channel analyzers. A computer controls and collects data from two multi-channel counters. This configuration results in 72 channel counting system in total. The CT rotator and radiation measurement system are controlled by a PC with LabVIEW program. Tomographic data were measured for a phantom by the measurement system and transportable gamma-ray CT. From the experimental data image reconstructions were performed by ML-EM algorithm. The result showed that the CsI detector system can be a suitable component for transportable gamma-ray CT system.

• 한국가스학회지
• /
• 제7권3호
• /
• pp.24-31
• /
• 2003

화학공장은 수많은 장치들로 구성되어 있고 매우 복잡한 구조를 가지고 있다. 특히 분산 제어 시스템(Distributed Control System, DCS)이나 공정 정보 시스템(Process Information System, PIS) 등을 설치하여 매분 또는 매초 단위로 공정 데이터를 얻고 있다. 화학공장의 경우, 데이터들의 방대한 양 뿐 만 아니라 데이터들간의 상호 연관성이 크고 재순환이나 화학 반응 등으로 인하여 막대한 계산량 및 비선형성을 지니기 때문에 효과적 분석에 곤란한 점이 있다. 따라서 본 연구에서는 함수연결연상 신경망을 이용하여 입력변수들을 확장함으로써 신경망의 비선형성 표현능력과 학습능력이 뛰어난 프로그램의 개발에 주안점을 두고 있다. REFA (Real Time Fault Analyzer)는 실시간으로 공정정보를 입력받은 후 입력값을 PC로 매핑하고, 이를 다시 역으로 매핑하여 입력값을 예측하여 공정을 감시하는 시스템으로 개발되었으며, Tennessee Eastman 공정에 적용해 우수성을 입증하였다.

• 대한물리치료과학회지
• /
• 제24권3호
• /
• pp.64-71
• /
• 2017

Purpose: This study was investigated basic data for verifying the effect of rope skipping exercise by comparing and analyzing the effects on the body composition of female students. Method: The subjects of this study were 12 female college students and the rope-skipping exercise program was conducted after the purpose and process of this study were explained and the consent of the subjects was obtained. And we used the body composition analyzer (Inbody 520, Korea) to measure before and after exercise of Body Mass Index (BMI), Percentage Body Fat (PBF) and Waist Hip Ratio (WHR). Result: First, the daily living group and the rope-skipping exercise group showed a significant difference in the BMI according to the period and there was no significant difference between the groups. Second, in the PBF, there were no significant differences in the duration, interaction between duration and group and differences between the groups. Third, in the WHR, there were no significant differences in the duration, interaction between duration and group and differences between the groups. Conclusion: BMI of each group according to the period was significantly different between before exercise and 6 weeks after exercise.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2001년도 제34회 추계학술대회 개최
• /
• pp.166-171
• /
• 2001

In order to improve the efficiency of the design process and the quality of the resulting design for the application-based exclusive rolling element bearings, this study propose design methodologies by using a genetic-based combinatorial optimization. By the presence of discrete variables such as the number of rolling element (standard component) and by the engineering point of views, the design problem of the rolling element bearing can be characterized by the combinatorial optimization problem as a fully discrete optimization. A genetic algorithm is used to efficiently find a set of the optimum discrete design values from the pre-defined variable sets. To effectively deal with the design constraints and the multi-objective problem, a ranking penalty method is suggested for constructing a fitness function in the genetic-based combinatorial optimization. To evaluate the proposed design method, a robust performance analyzer of ball bearing based on quasi-static analysis is developed and the computer program is applied to some design problems, 1) maximize fatigue life, 2) maximize stiffness, 3) maximize fatigue life and stiffness, of a angular contact ball bearing. Optimum design results are demonstrate the effectiveness of the design method suggested in this study. It believed that the proposed methodologies can be effectively applied to other multi-objective discrete optimization problems.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.403-406
• /
• 2004

In this paper, the design of damped structures associated with the piezoelectric shunt circuits is undertaken and it is applied to optical disk drive (O.D.D) main base in order to reduce unwanted vibration. In order to design effective piezoelectric structure, the admittance of the structure is introduced as the performance index of the piezoelectric shunt system. And the admittance offset of the shunt performance is theoretically investigated. It is also presented that the admittance can be calculated by commercial finite elements program. To verify the admittance calculated by F.E.M, admittance measurement is performed by impedance analyzer. In this verifying process, the validity of the finite element admittance analysis is found. As a practical approach, to reduce the vibration of the O.D.D. main base, piezoelectric shunt system is designed using the proposed admittance analysis and shunt effect is evaluated at all prescribed frequencies.

• 한국주조공학회지
• /
• 제31권6호
• /
• pp.347-353
• /
• 2011

There is thixo-extrusion to form high strength aluminum alloy. But, it is a problem that grains become grain coarsening during reheating process because the alloy was exposed at high temperature. In order to solve grain growth during reheating process, calcium was added in Al-Zn-Mg alloys. Primary a grain sizes of semi-solid Al-Zn-Mg-(0, 0.4, 0.6 and 0.9, wt.%)Ca were measured with image analyzer after reheating. Measured primary a grain sizes were applied to LSW(Lifshitz-Slyozov and Wagner) equation to check the effect of Ca on grain coarsening. Coarsening rate constant K values of semi-solid Al-Zn-Mg-(0, 0.4, 0.6 and 0.9, wt.%)Ca alloys were $371\;mm^3s^{-1}$, $247\;mm^3s^{-1}$, $198\;mm^3s^{-1}$ and $166 mm^3s^{-1}$, respectively. As increasing calcium content, K value decreased which means grains are refined. Also, grains of calcium addition were more spherical than that of calcium free.

• 대한간호학회지
• /
• 제44권3호
• /
• pp.328-338
• /
• 2014

Purpose: This study was done to explore experiences of persons living through the periods of cancer diagnosis, treatment, and self-care. Methods: With permission, texts of 29 cancer survival narratives (8 men and 21 women, winners in contests sponsored by two institutes), were analyzed using Kang's Korean-Computerized-Text-Analysis-Program where the commonly used Korean-Morphological-Analyzer and the 21st-century-Sejong-Modern-Korean-Corpora representing laymen's Korean-language-use are connected. Experiences were explored based on words included in 100 highly-used-morphemes. For interpretation, we used 'categorizing words by meaning', 'comparing use-rate by periods and to the 21st-century-Sejong-Modern-Korean-Corpora', and highly-used-morphemes that appeared only in a specific period. Results: The most highly-used-word-morpheme was first-person-pronouns followed by, diagnosis treatment-related- words, mind-expression-words, cancer, persons-in-meaningful-interaction, living and eating, information-related-verbs, emotion-expression- words, with 240 to 0.8 times for layman use-rate. 'Diagnosis-process', 'cancer-thought', 'things-to-come-after-diagnosis', 'physician husband', 'result-related-information', 'meaningful-things before diagnosis-period', and 'locus-of-cause' dominated the life of the diagnosis-period. 'Treatment', 'unreliable-body', 'husband people mother physician', 'treatment-related-uncertainty', 'hard-time', and 'waiting-time represented experiences in the treatment-period. Themes of living in the self-care-period were complex and included 'living-as-a-human', 'self-managing-of-diseased-body', 'positive-emotion', and 'connecting past present future'. Conclusion: The results show that the experience of living for persons with cancer is influenced by each period's own situational-characteristics. Experiences of the diagnosis and treatment-period are negative disease-oriented while that of the self-care period is positive present-oriented.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.255-255
• /
• 2010

Recently, nonvolatile memories (NVM) of various types have been researched to improve the electrical performance such as program/erase voltages, speed and retention times. Also, the charge trap memory is a strong candidate to realize the ultra dense 20-nm scale NVM. Furthermore, the high charge efficiency and the thermal stability of SiC nanocrystals NVM with single $SiO_2$ tunnel barrier have been reported. [1-2] In this study, the SiC charge trap NVM was fabricated and electrical properties were characterized. The 100-nm thick Poly-Si layer was deposited to confined source/drain region by using low-pressure chemical vapor deposition (LP-CVD). After etching and lithography process for fabricate the gate region, the $Si_3N_4/SiO_2/Si_3N_4$ (NON) and $SiO_2/Si_3N_4/SiO_2$ (ONO) barrier engineered tunnel layer were deposited by using LP-CVD. The equivalent oxide thickness of NON and ONO tunnel layer are 5.2 nm and 5.6 nm, respectively. By using ultra-high vacuum magnetron sputtering with base pressure 3x10-10 Torr, the 2-nm SiC and 20-nm $SiO_2$ were successively deposited on ONO and NON tunnel layers. Finally, after deposited 200-nm thick Al layer, the source, drain and gate areas were defined by using reactive-ion etching and photolithography. The lengths of squire gate are $2\;{\mu}m$, $5\;{\mu}m$ and $10\;{\mu}m$. The electrical properties of devices were measured by using a HP 4156A precision semiconductor parameter analyzer, E4980A LCR capacitor meter and an Agilent 81104A pulse pattern generator system. The electrical characteristics such as the memory effect, program/erase speeds, operation voltages, and retention time of SiC charge trap memory device with barrier engineered tunnel layer will be discussed.