• The Journal of Korean Academy of Prosthodontics
• /
• v.37 no.4
• /
• pp.433-453
• /
• 1999

There are a lot of elements affecting the success of implant prosthesis. The quality of surgical procedure is considered as one of the key factors. To avoid the excess heat generation is an important element of successful osseointegration and it can be achieved by using a gentle surgical technique with a sharp instrument in bone drilling. This study was performed to measure and analyze comparatively the heat transmitted to sur-rounding bone at a distance of 0.5mm from the periphery of the drill hole in each drilling stage. The results were as follows. In standard system, the temperature of surrounding bone tissue ranged from $29.2^{\circ}C\;to\;48.3^{\circ}C$ with irrigation and from $34.6^{\circ}C\;to\;84.3^{\circ}C$ without irrigation. And in wide system, the temperature of surrounding bone tissue ranged from $29.5^{\circ}C\;to\;52.5^{\circ}C$ with irrigation and from $34.8^{\circ}C\;to\;87.8^{\circ}C$ without irrigation. And the temperature ranges exceeded the threshold without irrigation, while showing less than the threshold by the cooling effect of irrigation. In comparing standard system with wide system, although there was no significant difference, ${\phi}4.3mm$ pilot and ${\phi}4.3mm$ twist drill of wide system showed high value and wide system showed slightly high elevation of temperature in all depth in fixture installation. In the finite element analysis, the calculated value by the Fourier's cooling law were applied to the bone drilling surface. And through analysis using different irrigation temperatures at $28^{\circ}C,\;15^{\circ}C\;and\;5^{\circ}C$, and according to the time. The result was that the cooling water at least below $15^{\circ}C$ was required to maintain the temperature of surrounding bone less than threshold in bone drilling, the cooling water below $5^{\circ}C$ was required to gain more sufficient cooling effect, and cooling over 5 seconds was needed after bone drilling for sufficient effect.

• Journal of Periodontal and Implant Science
• /
• v.24 no.1
• /
• pp.64-86
• /
• 1994

The authors have transplanted periodontally involved roots which had been root planed into healthy and periodontally involved extraction sockets, and studied the root resorption patterns as well as its effect on new bone formation and wound healing. Alveolar bone around mandibular premolars of 6 adult dogs has been surgically removed, followed by ligation of orthodontic elastic wires for 8 weeks inducing chronic periodontal disease. After removing the crown portions, roots were extracted, and notches were made on the root surfaces discriminating healthy and periodontally involved areas using burs. Controls and experimental groups were divided as follows. Control I : Transplantation of periodontally involved root into healthy extraction sockets. Control II : Transplantation of periodontally involved root into diseased extraction sockets. Experimental group I : Transplantation of root planed roots into healthy extraction sockets. Experimental group II : Transplantation of root planed roots into diseased extraction sockets. Extraction sockets were sutured after transplantations, completely submerging the roots. Healing progress was histologically observed at 2nd, 8th, 12th, and 20th weeks, and the results were as follows ; 1. No inflammation or infection within the extraction sockets had been observed in all groups throughout the experimental period. 2. Reversal lines were observed at week 2 in all groups, clearly discriminating socket walls and new bone, and numerous blood vessels were observed in the new bone trabeculae. 3. Experimental groups showed markedly less root resorption compared to the controls at week 2, but as time progressed, severe resorptions were present in all groups. 4. Localized areas of new bone ankylosis were observed, and the rest of the areas showed collagen fiber insertion with new bone formation at its periphery. 5. No clear differences were found in healing and alveolar bone regeneration between healthy and diseased extraction sockets. 6. The amount of root resorption and ankylosis had increased up to week 8 and 12, showing ankylosis of new bone and the roots. However, no further increase in ankylosis was observed at week 20. 7. Most of the cementum on healthy roots was directly ankylosed to new bone at week, 2, and were gradually resorbed and replaced by new bone thereafter. These results appear to indicate that root planing may inhibit early root resorption of transplanted roots, but gradual replacement by alveolar bone and collagen fibers eventually occur. Condition of the roots or presence of disease in extraction sockets do not appear to make marked differences in alveolar bone regeneration process.

• Journal of Periodontal and Implant Science
• /
• v.38 no.sup2
• /
• pp.317-324
• /
• 2008

Purpose: Aggregatibacter actinomycetemcomitans was associated with localized aggressive periodontitis, endocarditis, meningitis, and osteomyelitis. The cytolethal distending toxin (CDT) of A. actinomycetemcomitans was considered as a key factor of these diseases is composed of five open reading frames (ORFs). Among of them, An enzymatic subunit of the CDT, CdtB has been known to be internalized into the host cell in order to induce its genotoxic effect. However, CdtB can not be localized in host cytoplasm without the help of a heterodimeric complex consisting of CdtA and CdtC. So, some studies suggested that CdtC functions as a ligand to interact with GM3 ganglioside of host cell surface. The precise role of the CdtC protein in the mechanism of action of the holotoxin is unknown at the present time. The aim of this study was to generate recombinant CdtC proteins expression from A. actinomycetemcomitans, through gene cloning and protein used to investigate the function of Cdt C protein in the bacterial pathogenesis. Materials and Methods: The genomic DNA of A. actinomycetemcomitans Y4 (ATCC29522) was isolated using the genomic DNA extraction kit and used as template to yield cdtC genes by PCR. The amplifed cdtC genes were cloned into T-vector and cloned cdt C gene was then subcloned to pET28a expression vector. The pET28a-cdtC plasmid expressed in BL21 (DE3) Escherichia coli system. Diverse conditons were tested to opitimize the expression and purification of functional CdtC protein in E. coli. Results: In this study we reconstructed CdtC subunit of A. actinomycetemcomitans Y4 and comfirmed the recombinant CdtC expression by SDS-PAGE and Western Blotting. The expression level of the recombinant CdtC was about 2% of total bacterial proteins. Conclusion: The lab condition of procedure for the purification of functionally active recombinant CdtC protein is established. The active recombinant CdtC protein will serve to examine the role of CdtC proteins in the host recognition and enzyme activity of CDT and investigate the pathological process of A. actinomycetemcomitans in periodontal disease.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.4
• /
• pp.604-610
• /
• 2005

This study was to evaluate the effects of several light curing units on the microleakage of composite resin restorations in primary teeth. The types of curing units were traditional low intensity halogen light(Optilux 360), plasma arc light(Filpo) low heat plasma arc light(Aurys) and high intensity LED(Freelight 2). After preparing cavities on sound primary teeth, cavities were filled with composite resin(Z100) using the same resin bond agent(Scotchbond Multi-Purpose) and were cured with each curing light system. After storing each specimen in sterile water for 24 hours, thermal circulation was done 1,000 times followed by pigmentation using 2% methylene blue solution. Each specimen was sliced and the degree of pigmentation was graded. When microleakage is graded, the average of Aurys was 0.95 which was the lowest and Freelight 2(1.05), Filpo(1.25), Optilux 360(1.30) followed. But values were not shown statistically significant difference (P>0.05). The results suggest that the newly developed curing units which has advantage in children by decreasing discomfort and procedure time can increase the microleakage of the composite resin.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.2
• /
• pp.293-299
• /
• 2005

It is important to reduce chair time and procedure in restorative treatment for children. Composite resin is not only used in esthetic restoration of anterior teeth but also posterior teeth by its improved physical property. The 7th generation dentin bonding system was recently developed in order to simplify three steps which is needed to bond composite resin to tooth surface-etchant, primer, adhesive. We compared shear bond strengths of 4, 5, 6, 7th generations dentin bonding systems. The primary dentin was pretreated with 4, 5, 6, 7th generation dentin bonding systems. Then composite resin was cured to the specimen using molds 2.5mm in diameter and 2mm in height. Thermocycling was performed and shear bond strength was finally measured. The results were as follow; 1. The mean values of shear bond strengths in 5th generation dentin bonding system(group 2) were greater than those of 4, 6, 7th generation dentin bonding system(group 1, 3, 4). The differences were statistically significant. 2. The mean values of shear bond strengths in 4th generation dentin bonding system(group 2) were greater than those of 6, 7th generation dentin bonding system(group 1, 3, 4). But, the differences were not statistically significant. 3. Between the mean values of shear bond strengths in 6, 7th generation dentin bonding system(group 3, 4) were similar.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.34 no.1
• /
• pp.162-168
• /
• 2007

Impaction of the maxillary central incisor may cause social, esthetic, and functional problems in children. There are various means of treatment for the inverted maxillary central incisor, such as extraction, surgical opening followed by orthodontic traction surgical repositioning or intra-alveolar autotransplantation prior to extraction. In this case, we surgically repositioned the inverted maxillary central incisor to normal semi-erupted position in a 5-year-old boy The developmental stage of the inverted tooth was Nolla's 6.5, which indicates formation of less than one third of the root. After surgical reposition, we did follow-up for 21 months, expecting spontaneous growth Unfortunately, poor prognosis was noted further root was not observed. Such failure seems to originate from possible injury on Hertwig's epithelial root sheath by surgical trauma. We performed surgical repositioning to retain the tooth instead of extraction. However, arrest of root development occurred which is one of the critical complications. In order to increase the success rate of the surgical reposition procedure, minimal surgical trauma is required as well as selection of adequate indication and decision of proper time of treatment considering the stage of root development.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.40 no.1
• /
• pp.41-47
• /
• 2013

Maxillary canines are the most commonly impacted or ectopically erupted teeth. If we find the abnormality of maxillary canines early, we can manage it reasonably and systematically. If we cannot see the spontaneous normalization at the periodic recall, primary canine extraction will be the next treatment choice. However, if the primary canine is extracted too early, the extraction socket will be filled with hard bone and then the eruption pathway can be locked. So it is more beneficial to extract the primary canine at the period about 6 months before the normal canine eruption time. The next treatment plan can be surgical and orthodontic approaches before the root apical closure of the impacted canine. Sometimes, surgical extraction and further prosthetic procedure can be needed for a severely malposed impacted canine or badly resorpted incisor. This is the case of the idiopathic mesial movement of impacted maxillary canines.

• Journal of The Korean Association For Science Education
• /
• v.24 no.5
• /
• pp.987-995
• /
• 2004

The purpose of this study was to analyze characteristics of problem solving process with proportional or compensational reasoning of the elementary school students. For this study, 85th grade students were selected and tested with Science Reasoning Task, information processing ability test and proportional and compensational reasoning tasks. This study revealed that students in mid concrete stage could solve the proportionality task and easy compensation task. But, most of the students could not solve difficult compensation task. And as the students got higher score in information processing test, it took them less time to solve the problem. The types of strategy used in solving proportional and compensational problem were categorized as the factor of change, building-up and the cross-product. Most of the students failed in problem solving used incorrect schema knowledge, procedure knowledge and strategy knowledge. Many students tended to use proportionality strategy to solve the difficult compensation task. Result of this study suggested that various task included different structure and the same schema knowledge can be effective for the advancement of students' proportional and compensational reasoning ability.

• Child Health Nursing Research
• /
• v.19 no.2
• /
• pp.111-119
• /
• 2013

Purpose: This research was a descriptive study of nursing activities observed in nursing simulation during a senior nursing student practicum. Content and frequencies of nursing activities during the simulation practice were identified. Methods: Thirty-six episodes of pediatric nursing simulation were videotaped. Both verbalizations and descriptions of nonverbal behaviors were recorded from the videotapes. The data were coded and analyzed. The coded nursing activities were evaluated for frequency and purpose of interaction. Results: Average time per simulation episodes was 27 minutes and ranged from 3.30 to 32.54 minutes. Nursing activities in these simulation episodes included nursing assessments such as vital sign measurement, associated symptom assessment, and check of patient condition, nursing interventions such as medication, tepid water massage, fluid therapy, provision of oxygen, suctioning, hyperglycemia and hypoglycemia management, communication such as parent education, procedure guidance, and communication among providers. Activities in assessment were most frequent, and among them, vital sign measurement and check of patient condition were more frequent than others. Conclusion: Students showed enhanced nursing activities such as more frequent nursing assessment, communication and interventions in their simulation experience. Therefore simulation experience can be considered as one strategies to provide nursing students with better and more intense practicum experience.

• Tuberculosis and Respiratory Diseases
• /
• v.72 no.5
• /
• pp.441-447
• /
• 2012

Background: Chest tube drainage (CTD) is an indication for the treatment of pneumothorax, hemothroax and is used after a thoracic surgery. But, in the case of incomplete lung expansion, and/or persistent air leak from CTD, medical or surgical thoracoscopy or, if that is unavailable, limited thoracotomy, should be considered. We evaluate the efficacy of bronchoscopic injection of ethanolamine to control the persistent air leak in patients with CTD. Methods: Patients who had persistent or prolonged air leak from CTD were included, consecutively. We directly injected 1.0 mL solution of 5% ethanolamine oleate into a subsegmental or its distal bronchus, where it is a probable air leakage site, 1 to 21 times using an injection needle through a fiberoptic bronchoscope. Results: A total of 15 patients were enrolled; 14 cases of spontaneous pneumothorax [idiopathic 9, chronic obstructive pulmonary disease (COPD) 3, post-tuberculosis 2] and one case of empyema associated with broncho-pleural fistula. Of these, five were patients with persistent air leak from CTD, just after a surgical therapy, wedge resection with plication for blebs or bullae. With an ethanolamine injection therapy, 12 were successful but three (idiopathic, COPD and post-tuberculosis) failed, and were followed by a surgery (2 cases) or pleurodesis (1 case). Some adverse reactions, such as fever, chest pain and increased radiographic opacities occurred transiently, but resolved without any further events. With success, the time from the procedure to discharge was about 3 days (median). Conclusion: Bronchoscopic ethanolamine injection therapy may be partially useful in controlling air leakage, and reducing the hospital stay in patients with persistent air leak from CTD.