• KIPS Transactions on Computer and Communication Systems
• /
• v.4 no.6
• /
• pp.185-196
• /
• 2015

Energy aware server clusters aim to reduce power consumption at maximum while keeping QoS(Quality of Service) compared to energy non-aware server clusters. They adjust the power mode of each server in a fixed or variable time interval to let only the minimum number of servers needed to handle current user requests ON. Previous studies on energy aware server cluster put efforts to reduce power consumption further or to keep QoS, but they do not consider energy efficiency well. In this paper, we propose an energy efficient cluster management based on autonomous learning for energy aware server clusters. Using parameters optimized through autonomous learning, our method adjusts server power mode to achieve maximum performance with respect to power consumption. Our method repeats the following procedure for adjusting the power modes of servers. Firstly, according to the current load and traffic pattern, it classifies current workload pattern type in a predetermined way. Secondly, it searches learning table to check whether learning has been performed for the classified workload pattern type in the past. If yes, it uses the already-stored parameters. Otherwise, it performs learning for the classified workload pattern type to find the best parameters in terms of energy efficiency and stores the optimized parameters. Thirdly, it adjusts server power mode with the parameters. We implemented the proposed method and performed experiments with a cluster of 16 servers using three different kinds of load patterns. Experimental results show that the proposed method is better than the existing methods in terms of energy efficiency: the numbers of good response per unit power consumed in the proposed method are 99.8%, 107.5% and 141.8% of those in the existing static method, 102.0%, 107.0% and 106.8% of those in the existing prediction method for banking load pattern, real load pattern, and virtual load pattern, respectively.

• Journal of dental hygiene science
• /
• v.6 no.3
• /
• pp.207-212
• /
• 2006

In parallel with social and economic progress, motives of patients to consult dentists have increased and diversified. An increasing number of people visit dental clinics to improve their facial appearance and masticating functions deteriorated largely due to malocclusion. There is also greater interest in and concern as well as demand for teeth alignment treatment among people. Under this situation, it is required to find and suggest ways to enhance quality and profitability of dental care in view of managerial needs for dentists to cope with changing circumstances. This study, thus, aims to measure satisfactions of orthodontics patients and to determine the elements influencing their satisfactions. For this aim, a survey was performed for 20 days from March 7th to 26th, 2005 by means of questionnaires distributed to randomly selected samples, resulting in following conclusions: 1. From comparison of satisfactions with dental service by their elements, higher satisfaction was reported from orthodontics patients in the element of dental hygienists(4.21). Least satisfaction, however, was found in the procedure for treatment and waiting hours(3.73). 2. By gender, male orthodontics patients turned out to be more satisfactory with dental service than females. In terms of intention for return visits, both male and female orthodontics patients showed higher satisfaction than non-orthodontics ones. 3. As for satisfaction with dental service by age of orthodontics and non-orthodontics patients, with regard to intention for return visit, orthodontics patients of all ages showed to have higher grade of satisfaction. 4. Regarding satisfaction with dental treatment by orthodontics and non-orthodontics patients by monthly income, Dental hygienist with intention for return visit, the higher the satisfaction of orthodontics patients. 5. In regard to satisfaction with dental treatment by education, higher satisfaction was expressed by orthodontics patients with elementary school education kept dentist, dental hygienist and internal and external environments. As a result from this study, we knew that dental service of the orthodontics patients is higher satisfaction than that of the non-orthodontics patients.

• Clinical and Experimental Pediatrics
• /
• v.45 no.7
• /
• pp.891-895
• /
• 2002

Purpose : The prevalence of renal anomalies in Turner syndrome(TS) has been reported to vary from 33% to 60%. The purpose of this study was to clarify the true incidence of renal malformations in Korean TS. Methods : We evaluated 33 patients with Turner syndrome diagnosed by karyotype in Inje University Busan Paik hospital and Youngnam University from January 1995. Intravenous pyelography(IVP) was performed on all patients; abdominal ultrasonography and 99mTc-DMSA renal scan were performed on some. Cytogenetic analysis was performed on all patients with peripheral blood lymphocytes. Results : Of the total 33 patients, the karyotype showed 45, X in 18(54.5%) patients, mosaicism in 11(33.3%) patients and structural aberration in 4(12.2%) patients. The overall incidence of renal anomalies was 36.4%. The renal anomalies included four cases of horeshoe kidney, six cases of abnormal renal collecting system one case of single kidney and one case of malrotation. The incidence of renal anomalies in 45, X karotype(44.4%) showed a higher rate than that of mosaicism and structural aberration(26.7%), but there is no statistical significance. Conclusion : The incidence of renal anomalies in Korean TS reveals 36.4%. This rate is similar to other foreign TS studies. We recommend that renal ultrasonography or IVP for investigation of renal anomalies should be done as a screening procedure for the better quality of life in patients with TS.

• Development and Reproduction
• /
• v.2 no.2
• /
• pp.213-221
• /
• 1998

Intracytoplasmic sperm injection (ICSI) has been widely used to treat couples with infertility due to severely impaired sperm charateristics and for whom conventional in-vitro fertilization (IVF) had failed. The extent to which the morphology of the oocyte at the light microscopy level is related to the results of ICSI vis controversial. In this study, oocytes from 44 patients were reviewed. The ICSI procedure was recorded through CCD camera. The oocytes were divided into five groups according to the presence of cytoplasmic inclusions, the width of perivitelline space (PVS), the presence of cell debris in PVS, the status of first polar body and the flexibility of oolemma. The results showed that the fertilization rate and embryonic development were not associated with the morphological criteria of oocyte. The degeneraton rate of oocytes after ICSI was significantly higher (P<0.001) in the oocytes whose membranes were broken at the moment of insertion (17.7%) than the oocytes whose membranes were broken by aspiration of cytoplasm (1.6%). More oocytes with cytoplasmic inclusions (48.4% vs. 25.1%, p<0.001), wide PVS (35.2% vs. 19.0%, p<0.001), or cell debris in PVS (53.3% vs. 38.4%, p<0.05) were observed in patients with female factor infertility compared to patients with male factor infertility. These results .suggest that the fertilization rate and embryonic development after ICSI are not correlated with oocyte morphology based on the presence of cytoplasmic inclusions, size of PVS, the presence of cell debris in PVS and the status of polar body. And the degeneration rate of oocytes after ICSI was associated with the flexibility of oolemma.

• Journal of Internet Computing and Services
• /
• v.17 no.1
• /
• pp.101-107
• /
• 2016

Due to the recent advancement in digital imaging technology, development of intervention equipment has become generalize. Video arbitration procedure is a process to insert a tiny catheter and a guide wire in the body, so in order to enhance the effectiveness and safety of this treatment, the high-quality of x-ray of image should be used. However, the increasing of radiation has become the problem. Therefore, the studies to improve the performance of x-ray detectors are being actively processed. Moreover, this intervention is based on the reference of the angiographic imaging and 3D medical image processing. In this paper, we propose a guidance system to support this intervention. Through this intervention, it can solve the problem of the existing 2D medical images based vessel that has a formation of cerebrovascular disease, and guide the real-time tracking and optimal route to the target lesion by intervention catheter and guide wire tool. As a result, the system was completely composed for medical image acquisition unit and image processing unit as well as a display device. The experimental environment, guide services which are provided by the proposed system Brain Phantom (complete intracranial model with aneurysms, ref H+N-S-A-010) was taken with x-ray and testing. To generate a reference image based on the Laplacian algorithm for the image processing which derived from the cerebral blood vessel model was applied to DICOM by Volume ray casting technique. $A^*$ algorithm was used to provide the catheter with a guide wire tracking path. Finally, the result does show the location of the catheter and guide wire providing in the proposed system especially, it is expected to provide a useful guide for future intervention service.

• Journal of Embryo Transfer
• /
• v.16 no.3
• /
• pp.193-201
• /
• 2001

This study was designed to examine the factors affecting in fertilization and development of embryos in vitro, and to examine whether zone drilling by laser irradiation can improve the hatching rate of IVF embryos from DNA marker-proved Hanwoo. DNA markers related to marbling score were identified using DNA fingerprinting with Ml3 probe and restriction enzyme Hae III. Oocytes were aspirated from immature ovarian follicles using a combined method of rectal ovarian-palpation and transvaginal ultrasound-guidance(6.5MHz) under local anesthesia. The aspirated oocytes were washed twice with fresh D-PBS containing 5% FBS and were rewashed 4 to 5 times with TCM-199 containing 5% FBS. A morphological grade of I to IV was assigned to each oocyte. Data were analyzed using the GLM procedure of SAS. Sperm separation methods did not have any significant effect on cleavage or developmental abilities of IVF embryos. Significantly(P<0.05) higher cleavage rate was observed in embryos from GI(60.0%, 3/5), GII(69.2%, 18/26) and GIII(62.1%, 59/95) compared to embryos from GIV oocytes(36.2%, 25/69). And the developmental rate to blastocyst stage was higher(P<0.05) in embryos from GI(33.3%, 1/3) and GII oocytes(38.9%, 7/18) than those from GIII(16.9%,10/59) and GIV oocytes(4.0%, 1/25). There was no significant difference in development of IVF embryos to blastocyst by media for in vitro culture. Proportion of hatched blastocyst was significantly(P<0.05) higher in embryos received zona drilling by laser than those of non-drilled.

• Journal of Embryo Transfer
• /
• v.16 no.3
• /
• pp.183-191
• /
• 2001

This study was designed to establish the superior method for IVF embryos from DNA marker-proved Hanwoo cattle. DNA markers related to marbling score were identified using DNA fingerprinting with Ml3 probe and restriction enzyme Hae III. Oocytes were aspirated from unstimulated. immature ovarian follicles using a combined method of rectal ovarian-palpation and transvaginal ultrasound-guidance(6.5MHz) under local abesthesia. The aspirated oocytes were washed twice with fresh D-PBS containing 5% FBS and were rewashed 4 to 5 times with TCM-199 containing 5% FBS. A morphological grade of I to IV was assigned to each oocyte. Data were analysed using the GLM procedure of SAS. Mean number of follicles identified on ultrasound was 5.5 $\pm$2.9 in right and 4.3 $\pm$2.8 in left ovaries, respectively. The highest follicles(16.6$\pm$2.6) were found in 5101 cow compared to others. Recovery rate of follicular oocytes in individual cow was highest in 5101 cow with 89.3% in > 2mm and 94.0% in $\leq$ 2mm follicles. Total recovery rate was significantly(P<0.01) higher in $\leq$ 2mm(85.7%, 130/154) than > 2mm follicles(74.2%, 201/271). Significantly more oocytcs of Grade IV were recovered from > 2mm follicles. Mean number follicles recovered was 4.8$\pm$3.7. 3.0$\pm$3.4 and 0.3$\pm$0.6 in $\leq$2mm, 2~6mm and $\geq$6mm follicles. respectively. Our results imply that the more fertilizablc oocytes can be recovered from invisible-immature follicles by the combination of simultaneous rectal ovarian-palpation and ultrasound-guided approach in Hanwoo cattle.

• Journal of Chest Surgery
• /
• v.38 no.3 s.248
• /
• pp.204-213
• /
• 2005

In spite of the improvement in the quality of artificial heart valves and surgical techniques, the incidence of the complications following valve replacement is still high. We reviewed the clinical results of the valve replacements peformed in Korean University Anam Hospital during the last 26 years. Material and Method: The data of 571 patients who received valve replacement between December 1976 and December 2003 were reviewed. Result: There were 304 cases of MVR which was the most common procedure performed. There were 122 cases of AVR, and 111 cases of AVR with MVR. Among the 47 patients who received redo operation 38 cases were redo cases including 31 cases of MVR. $32.5\%$ of the patients who had tissue valve replacement had second valve replacement with 10.2 $\pm$ 3.9 years interval. $24.3\%$ (139/571) of the patients developed valve related complications and cerebral infarction was the highest in frequency. Atrial fibrillation was related with increased complication rates and the mechanical valve replaced group had higher hemorrhagic complication rate than tissue valve replaced group. The operative mortality was $3.68\%$ and the most common cause of the failure was low output syndrome. The operative mortality was higher in the patient group who had valve replacement before the year 1990. The patient group who had mechanical valve replacement had higher operative mortality rate th;3n the tissue valve group. The 5-year survival rate was $92.2\%$ and 10 year survival rate was $85.7\%$. Conclusion: The operative mortality of valve replacement has been improved. The mechnical valve replaced patients had higher hemorrhagic complication rate than the tissue valve replaced patients and more tissue valve replaced patients received redo valve replacement.

• Microbiology and Biotechnology Letters
• /
• v.33 no.1
• /
• pp.41-50
• /
• 2005

An organic acid tolerance mutant (M-200) was obtained from Leuconostoc mesenteroides KCCM 35471, followed by the screening procedure using a specific organic acid medium (lactic acid: acetic acid, 2:1). The characteristics of the acid tolerance M-200 and the wild type LM-W were examined at various temperature and pH ranges $(l0-30^{\circ}C$ of temp, 3.5-4.5 of pH). The growth of strain M-200 at HCl adjusted medium $(10^{\circ}C\;and\;pH 3.5)$ was observed. In the case of organic acid adjusted medium, the strain showed its growth at the pH range of 3.8. When the strain M-200 was used as a starter for Kimchi fermentation, a constant acid level (0.55) was observed during the whole fermentation period. This result indicates that the strain produces a proper level of acid content for the Kimchi fermentation. This result also indicates that the edible period of Kimchi can be extended to 3.5 fold compare to the result obtained from the LM-W used Kimchi fermentation. However the excess use of the strain M-200 showed the inhibition of growth of Lactobacillus plantarum, low lactic acid level content and low level of organoleptic test. In the case of organic acid content during the Kimchi fermentation, the strain M-200 showed relatively low production rate compare to the wild type (M-200: 3.5 mg/L at 21 days of fermentation, LM-W: 7 mg/L at 21 days of fermentation). Therefore a mixed Kimchi starter containing M-200 and other strains probably maintain a good Kimchi quality during the fermentation.

• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.3
• /
• pp.174-182
• /
• 2011

The present study evaluated the major lead sources in a steel metallurgy industrialized city by measuring lead isotopes/lead concentrations of ambient air and potential sources in an industrial area and residential areas according to relative distance. The quality control program obtained during the measurement procedure for lead isotopes and concentrations exhibited $0.5ng/m^3$ for method detection limit, more than 90% for recoveries of standard particulate matters, and lower than 0.2% for reproducibility errors of four lead isotopes ($^{204}Pb$, $^{206}Pb$, $^{207}Pb$, $^{208}Pb$). For all three lead isotope ratios ($^{206}Pb/^{204}Pb$, $^{207}Pb/^{206}Pb$, $^{208}Pb/^{206}Pb$), the ratios were obtained in the industrial area were closer to nearby residential area than those of a residential area far away from the industrial area, thereby suggesting that lead sources were more similar each other in the industrial and nearby residential area. Furthermore, for both summer and winter seasons ambient lead concentrations were more than four times higher in the industrial area than in the residential areas and in turn, they were higher in the nearby residential area compared with the far-away residential area. As a result, it was suggested that lead emitted from the industrial area would influence more the ambient lead in the nearby residential area than the far-away residential area. Both slag and traffic emissions are likely to be major lead sources in the industrial and nearby residential areas, since their three lead isotope ratios ($^{206}Pb/^{204}Pb$, $^{207}Pb/^{206}Pb$, $^{208}Pb/^{206}Pb$) were similar to the ratios obtained from ambient air of these two areas. In addition, the lead isotope ratios revealed different pattern between seasons, and the ambient lead concentrations were higher for winter than for summer.