• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.2 no.2 s.3
• /
• pp.73-84
• /
• 2003

Due to the problems of existing prepaid plastic card issued by Korea Highway Company, the prepaid electronic payment system using a smart card, called HipassPLUS Card, was developed to overcome the Problems. PSAM is one of the main component of the systea which can retrieve the value from HipassPLUS card, transmit the transaction data to CSAM, and store the accumulated account lists. For the safety of the elecoonic payment system, the functions of PSAM should be faultless. This paper developed a test module including the test method, the test checklist, and the test procedure. The test module examines the functionality and security of the payment mechanism to insure that the value stored in HipassPLUS card can be raid to PSAM by the merchants and the standardized SAM. The test module also inspects the transmission mechanism to send and store the transaction data kom PShM to CSAM correctly and safely. Ihe module is designed to test the standard items using the test checklists for PSAM. The test items and the test checklists of PShM was selected under the provision of the specification of Korea Highway Company and ISO standard. Ihe evaluation on PSAM using the test module indicates that PSAM satisfies the evaluation criteria on the quality characteristics of the functionality, security, and compatibility.

• Journal of Radiation Protection and Research
• /
• v.36 no.1
• /
• pp.28-34
• /
• 2011

The measurement-based verification for intensity modulated radiation therapy (IMRT) is a time-and labor-consuming procedure. Instead, this study aims to develop a MU fluence reconstruction method for IMRT QA. Total actual fluences from treatment planning system (TPS, Eclipse 8.6, Varian) were selected as a reference. Delivered leaf positions according to MU were extracted by the dynalog file generated after IMRT delivery. An in-house software was develop to reconstruct MU fluence from the acquired delivered leaf position data using MATLAB. We investigated five patient's plans delivered by both step-and-shoot IMRT and sliding window technologies. The total actual fluence was compared with the MU fluence reconstructed by using commercial software (Verisoft 3.1, PTW) and gamma analysis method (criteria: 3%/3 mm and 2%/1 mm). Gamma pass rates were $97.8{\pm}1.33$% and the reconstructed fluence was shown good agreement with RTP-based actual fluence. The fluence from step and shoot IMRT was shown slightly higher agreement with the actual fluence than that from sliding window IMRT. If moving from IMRT QA measurements toward independent computer calculations, the developed method can be used for IMRT QA. A point dose calculation method from reconstructed fluences is under development for the routine IMRT QA purpose.

• Journal of Korean Society of Forest Science
• /
• v.101 no.3
• /
• pp.412-425
• /
• 2012

Concrete Soil Erosion Control Dam, which blocks flow of debris flow in torrential stream, are reported to lose expected functions due to structural failure and collapses, caused by poor construction, material deterioration and external impacts. In this paper, an integrity assessment technique for debris barriers was proposed, which allows preliminary detection of problems inherent in debris barriers. The proposed integrity assessment technique is a non-destructive method based on SASW method, one of surface-wave tests. In this paper, a practical procedure and analysis guidelines in applying the SASW technique to debris barrier was proposed and its validity was verified using five decrepit debris barriers older than 20-year old. As a result, the SASW method was validated for the reliable grade evaluation method for concrete soil erosion control dam, and the resulting grades turned out to agree with the results determined by Sabang Associations.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.14
• /
• pp.5907-5912
• /
• 2015

Purpose: To evaluate and update evidence for prognostic effects of kidney-sparing (KS) management and nephroureterectomy (NU) for upper tract urothelial carcinomas. Materials and Methods: Pubmed, Embase and the Cochrane Library were retrieved for the identification of comparative studies of kidney-sparing procedure and nephroureterectomy for upper tract urothelial carcinoma prior to December 2014. The data were extracted independently by 2 reviewers and the quality of the included studies was assessed. Review Manager 5.3 and STATA 13 were used to perform the meta-analysis. Results: Twenty-three observational studies including 1,587 KS and 3,996 NU were evaluated. The results of the meta-analysis showed that nephroureterectomy had no significant benefit with regard to intravesical recurrence (IRFS), metastasis (MFS), cancer specific survival (CSS) and overall survival (OS) except the total tumor recurrence (RFS) when compared with kidney sparing management. The respectively pooled outcomes were HR 1.36 (0.69-2.68, P=0.38) for IRFS, 1.09 (0.59-2.01, P=0.78) for MFS, 1.17 (0.77-1.79, P=0.47) for CSS, 1.50 (0.90-2.48, P=0.12) for OS and 1.61 (1.03-2.51, P=0.04) for RFS. Conclusions: On the whole, kidney-sparing management had equivalent prognostic effect on upper tract urothelial carcinoma as the standard nephroureterectomy except in tumor recurrence. However, the results should be interpreted with caution for lack of stage and grade stratification and multi-center randomized controlled trials are still needed to verify our results.

• Asian-Australasian Journal of Animal Sciences
• /
• v.30 no.12
• /
• pp.1684-1688
• /
• 2017

Objective: From a review of published information on genetic association studies, a meta-analysis was conducted to determine the influence of the genes ${\kappa}-casein$ (CSN3) and ${\beta}-lactoglobulin$ (LGB) on milk yield traits in Holstein, Jersey, Brown Swiss, and Fleckvieh. Methods: The GLIMMIX procedure was used to analyze milk production and percentage of protein and fat in milk. Models included the main effects and all their possible two-way interactions; not estimable effects and non-significant (p>0.05) two-way interactions were dropped from the models. The three traits analyzed used Poisson distribution and a log link function and were determined with the Interactive Data Analysis of SAS software. Least square means and multiple mean comparisons were obtained and performed for significant main effects and their interactions (p<0.0255). Results: Interaction of breed by gene showed that Holstein and Fleckvieh were the breeds on which CSN3 ($6.01%{\pm}0.19%$ and $5.98%{\pm}0.22%$), and LGB ($6.02%{\pm}0.19%$ and $5.70%{\pm}0.22%$) have the greatest influence. Interaction of breed by genotype nested in the analyzed gene indicated that Holstein and Jersey showed greater influence of the CSN3 AA genotype, $6.04%{\pm}0.22%$ and $5.59%{\pm}0.31%$ than the other genotypes, while LGB AA genotype had the largest influence on the traits analyzed, $6.05%{\pm}0.20%$ and $5.60%{\pm}0.19%$, respectively. Furthermore, interaction of type of statistical model by genotype nested in the analyzed gene indicated that CSN3 and LGB genes had similar behavior, maintaining a difference of more than 7% across analyzed genotypes. These results could indicate that both Holstein and Jersey have had lower substitution allele effect in selection programs that include CSN3 and LGB genes than Brown Swiss and Fleckvieh. Conclusion: Breed determined which genotypes had the greatest association with analyzed traits. The mixed model based in Bayesian or Ridge Regression was the best alternative to analyze CSN3 and LGB gene effects on milk yield and protein and fat percentages.

• Journal of Korean Academy of Nursing
• /
• v.31 no.2
• /
• pp.221-231
• /
• 2001

This study was conducted by analyzing all 33 articles based on the LISREL, published from January 1991 to March 1999 in Korea. The analyses consisted of the publication date of articles, principal dependent variables, subjects of the research, adequacy of sampling, adequacy of research purposes and results, accordance between theoretical model and hypothetical model, fit measures, theoretical base of model modification, and adequacy of conclusion. The results were as follows : . The thesis of 33 articles in total were outnumbered as 25 (75.8%) to 8 (24.2%) research articles. As for a sex classification of the subjects, 45.5% of the research were conducted around a female group of subjects, while 54.5% were done for both sex, The range of the sample size was 105 to 803, and the average was 259 subjects. . A single theoretical variable was measured for each measurement variable, any difference between variables was hardly found in 8 articles (24.2%), and 19 articles (57.6%) did not consider any measurement error. To analyze if the representative has been articles (21.2%) were seen with a sign of a representative. Questionnaires were used in a majority (31 articles) of the data collecting process. Only 2 articles (6.1%) were measured with a physiologic index simultaneously. . 14 articles (42.2%) were centered on theory development, 10 articles on theory synthesis, and 9 articles on theory test. The research purposes and results were consistent in 25 articles (75.5%) and 8 articles (24.2%) were inconsistent. The quality of life and health promotion behavior were the concepts most frequently studied as a dependent variable, and 7 articles centered on them. In applied theories a health promotion model was used on 4 articles (12.1%), while role theory and stress-coping models were in 3 articles respectively. . The articles were analyzed to see if the hypothetical model was elaborated and tested by the theoretical model. Twenty-five articles proved to be rationale for the inconsistencies. Also, 56.5% proposed hypotheses were supported among the subject articles, and 30 articles (90.0%) suggested a revised model. Path coefficient (17 articles) and theoretical adequacy (17 articles) were the standards mostly used. In conclusion, the principal factors were obtained from the research are to be considered as the principes of LISREL application. First, a model has to be established on a theoretical base rather than empirical results dependent on the data. The results are also required to be globally interpreted. Secondly, at least 200 samples are necessary to satisfy the need. Third, more than 3 measurement variables are to be adjusted to a single theoretical variable; the measurement errors must be suggested as well. Finally, normal distribution characteristics of the data and the estimation method need to be reported. Based on the research result, the follows are suggested; . Systematic criteria on the LISREL application and procedure need to be developed . Agreement form is required to report the results of research using the LISREL

• Progress in Medical Physics
• /
• v.26 no.1
• /
• pp.1-5
• /
• 2015

The C-band compact linear accelerator (linac) is being developed at Dongnam Institute of radiological & Medical Sciences (DIRAMS) for medical and industrial applications. This paper was focused on the output measurement of the electron beam generated from the prototype electron linac. The dose rate was measured in unit of cGy/min per unit pulse frequency according to the IAEA TRS-398 protocol. Exradin-A10 Markus type plane parallel chamber used for the measurement was calibrated in terms of dose to water at the reference depth in water. The beam quality index ($R_{50}$) was determined by the radiochromic film with a solid water phantom approximately due to low energy electrons. As a result, the determined electron beam output was $17.0cGy/(min{\cdot}Hz$. The results were used to monitor the accelerator performance during the development procedure.

• Journal of Veterinary Clinics
• /
• v.11 no.2
• /
• pp.545-552
• /
• 1994

This experiment was carried out to investigate the renditions to maintain good post-thaw motility and viability of canine spermatozoa when the semen was frozen using methanol. The semen from two male dogs which had been proven to be fertile in the previous one year was treated with different compositions of semen diluent and was frozen at different freezing temperatures, When canine semen was frozen at-2$0^{\circ}C$, -6$0^{\circ}C$, or -8$0^{\circ}C$, the spermatozoa frozen and stored at -2$0^{\circ}C$ showed very low post-thaw motility and viability from day 2 to 7 and showed no viability since day 15 after freezing. The spermatozoa frozen and stored at -6$0^{\circ}C$ or -8$0^{\circ}C$ showed higher post-thaw motility and viability on day 2, 1, 15 and 30 after freezing than that frozen and stored at-2$0^{\circ}C$(p<0.01), with no difference between two groups. Among different composition groups of the semen diluents of control(tris + egg yolk + glycerol), egg yolk-free, 히ycerol-free, and tris-free, Prior to freezing, the egg yolk-free diluent showed significantly love. motility and viability than the other diluents(p<0.05). On each thawing day (from day 2 to 15 after freezing), control group showed considerably higher motility and viability than the other groups(p<0.01). The canine spermatozoa frozen and stored at -6$0^{\circ}C$ and -8$0^{\circ}C$ showed gradual decrease of motility from day 2 to 30 after freezing and the spermatozoa of these two groups thawed on day 30 showed considerably love. motility than those thawed on day 2 after freezing, respectively(p<0.01). These results indicate that the freezing temperature of either -6$0^{\circ}C$ or -8$0^{\circ}C$ can be applicable to the freezing method using methanol and also all of the components of the semen diluent including cryoprotectant, buffer and cold-shock buffer are very important to maintain motility and viability of canine spermatozoa in the freezing and thawing procedure.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.3
• /
• pp.61-69
• /
• 2007

The building materials used for improving indoor air quality, the wood charcoal mixed with cement mortar or natural water paint were examined for their potential removing ability of formaldehyde. After the reaction of samples with formaldehyde in the glass flasks designed in our lab, the remaining formaldehyde was collected using DNPH (2,4-dinitrophenyl hydrazine) cartridges, and their concentration was determined using HPLC. From the results, it was found that the removing amount of formaldehyde per one gram sample containing 5, 10, or 15% of wood charcoal was more than three times compared to that of control (100% cement mortar or water paint). Their elimination percentages from the initial formaldehyde was about 80~90%. The experimental results for wood charcoal-water paint showed a similar trend with those of wood charcoal-cement mortar samples. Their elimination percentages from the initial formaldehyde was about 90%. It is proposed that formaldehyde is adsorbed on the adsorbed 'O' or 'OH' groups in the graphene layers formed through the re-arrangement of lignocellulose in the wood during the carbonization procedure.

• Journal of muscle and joint health
• /
• v.9 no.1
• /
• pp.18-27
• /
• 2002

Introduction : Exercise has been suggested as an important nursing strategy in which to help elderly maintain functional performance and to enhanced quality of life. Most of exercise study has been reported on fitness exercise such as walking, swimming, dance etc for health of elderly. There have been few reports about exercise on the promotion of small and fine movement of elderly. The purpose of this pilot study was to determine an effect of 6 weeks hand and finger exercise in home to improve hand muscle strength such as grip strength and finger pinch pressure. Materials and Methods Design: This pilot study was used one group pre and post-test design. Sample: Twelve elderly women above 60 years of age or older living in community were selected by convenient sampling. Procedure: Signed informed consent was obtained prior to participate in this study. The authors met elderly and taught hand and finger exercise, daily a week for 6 weeks, within 30 minutes per session. But exercise frequency and strength were not same. Instruments: Left and right grip strength were measured by Bulb Dynamometer(made in USA) and left and right pinch pressure were measured by Baseline Hydraulic Pinch Gauge(made in USA). Data analysis: Discriptive data analyses were performed on all variables. Wilcoxon matched-pairs Signed-Ranks test were used to find difference of grip strength and pinch pressure between pre and post exercise using SPSS 10.0 for Window. Results: Samples age ranged from 60 to 73, Mean age was 65.3. All were women. Ten elderly were diagnosed osteoarthritis and one had DM. After six weeks hand and finger exercise, Left and right grip strength were higher than those of before exercise(Z=-2.667, P<0.01 ; Z=-3.065, p<0.01). And left pinch pressure after hand and linger exercise were higher than that of before pinch pressure (Z=-2.315, p<0.05). But Right pinch pressure was not shown significant change(Z=-1.099, p>0.05). Conclusions: Although this study was limited by the sample size and design, the findings provide some important implications for community based exercise nursing intervention. Short term (six weeks) exercise of hand and linger is shown to be useful as nursing intervention to maintain routine daily activities such as eating, writing, grip something for elderly.