• Clinical and Experimental Reproductive Medicine
• /
• v.24 no.1
• /
• pp.111-118
• /
• 1997

Intracytoplasmic sperm injection (ICSI) recently has been utilized widely as the most successful technique to overcome the unfertilization problem in cases of severe male infertility in couples who could not be treated by conventional IVF. Recently, indications of ICSI have been extended further and more fertilized oocytes become available. Thus, it is necessary to examine the efficiency of freezing the surplus embryos obtained from ICSI. We compared the survival rate and the future outcome of cryopreserved embryos obtained either after conventional IVF or ICSI during the same period. After ICSI or IVF, five best-quality embryos from each patient were transferred in the stimulation cycle and the surplus pronuclear (PN) stage oocytes or multicellular embryos were cryopreserved by slow freezing protocol with 1,2-propanediol (PROH) as a cryoprotectant. A total of 792 embryos from ICSI trial were thawed and 65.2% (516/792) survived. The survival rates of PN stage oocyte, multicellular embryo and PN + multicellular embryo were 63.5%, 68.2%, 64.0%, respectively. After 111 transfers, 34 pregnancies were achieved, corresponding to a clinical pregnancy rate of 30.6% per transfers. We thawed 1033 embryos from IVF trials and 57.5% (594/1033) survived. In IVF cycle, the survival rates of PN stage oocyte, multicellular embryo and PN + multicellular embryo were 58.2%, 65.2%, 40.2%, respectively. Thirty eight clinical pregnancies were established after 134 transfers, corresponding to a pregnancy rate of 28.4% per transfer. The cleavage rate of thawed PN stage oocytes from ICSI trial (61.3%) was significantly higher than those from conventional IVF (53.4%). The developmental rates of good embryo (${\geqq}$ grade II) in thawed PN stage oocytes obtained from conventional IVF and ICSI were 63% and 65%, respectively. We concluded that PN stage oocytes, multicellular embryos resulting from ICSI procedure can be successfully frozen/thawed with reasonable clinical pregnancy rates comparable to those of IVF.

• Journal of National Security and Military Science
• /
• s.7
• /
• pp.271-303
• /
• 2009

"Ubiquitous sensor network" definition is this-Someone attaches electro-magnetic tag everything which needs communication between man to man, man to material and material to material(Ubiquitous). By using attached every electro-magnetic tag, someone detects it's native information as well as environmental information such as temperature, humidity, pollution and infiltration information(Sensor). someone connects it realtime network and manage generated information(Network). 21st century's war is joint combined operation connecting with ground, sea and air smoothly in digitalized war field, and is systematic war provided realtime information from sensor to shooter. So, it needs dramatic development on watch reconnaissance, command and control, pinpoint strike etc. Ubiquitous computing and network technologies are essential in national defense to operate 21st century style war. It is possible to use many parts such as USN combined smart dust and sensor network to protect friend unit as well as to watch enemy's deep area by unmanned reconnaissance, wearable computer upgrading soldier's operational ability and combat power dramatically, RFID which can be used material management as well as on time support. Especially, unmanned watch system using USN is core part to transit network centric military service and to get national defense efficiency which overcome the dilemma of national defense person resource reducing, and upgrade guard quality level, and improve combat power by normalizing guardian's bio rhythm. According to the test result of sensor network unmanned watch system, it needs more effort and time to stabilize because of low USN technology maturity and using maturity. In the future, USN unmanned watch system project must be decided the application scope such as application area and starting point by evaluating technology maturity and using maturity. And when you decide application scope, you must consider not only short period goal as cost reduction, soldier decrease and guard power upgrade but also long period goal as advanced defense ability strength. You must build basic infra in advance such as light cable network, frequency allocation and power facility etc. First of all, it must get budget guarantee and driving force for USN unmanned watch system project related to defense policy. You must forwarded the USN project assuming posses of operation skill as procedure, system, standard, training in advance. Operational skill posses is come from step by step application strategy such as test phase, introduction phase, spread phase, stabilization phase and also repeated test application taking example project.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.10
• /
• pp.1-9
• /
• 2001

The MAC (Medium Access Control) protocol is needed for the OLT(Optical Line Termination) to allocate bandwidth to ONUs(Optical Network Units) and ONTs(Optical Network Terminations) dynamically in the ATM PON(Passive Optical Network). With the protocol, the OLT gathers ONUs' informations and provides grants efficiently to each ONU. Two important functions of the MAC protocol is the grant request procedure and the grant distribution algrithm. The latter has the greatest arithmetic portion in the TC(Transmission Convergence) module, occupies a relatively large portion of the overall chip area, has often been the limiting factor in terms of speed, and should be designed to guarantee the quality of service for various traffics. In this paper, we implement the MAC with the FPGA which can allocate grants dynamically according to the queue length information and the number of active ONUs and distribute grants uniformly to minimize the cell delay variation for each ONU. The structure of the MAC scheduler for the dynamic bandwidth assignment has a programmable look-up table. Also, it has a simple structure, the less chip area, and the lower delay time.

• Journal of Digital Contents Society
• /
• v.9 no.4
• /
• pp.661-667
• /
• 2008

The dynamics of business cycles has been changed by the macroscopic economic forces because of the introduction of new technical know-how each year. These the dynamics of business has a significant influence on the investment of enterprise in the information communication field. Today, the most important goal of the IT investment is simply not to lower the production cost any more, but to improve the usefulness for the customers and partners in order to obtain the optimized mass products. Therefore, the enterprises have been concentrating their all abilities on the automation, integration, and optimization of business process using BPM. In addition, they are concentrating their efforts on the business expansion by approaching the technical aspect using RFID application system. However, in order to accomplish a successful enterprise ability, the technical view, business process view, and organization view must be considered together. We suggested the method considering organization view, via the technical element, i.e., RFID system for approaching the business process. Furthermore, we tried the optimization of assignment using Context Analysis methodology and proposed the method to reduce the element with respect to the time, human, and expense by applying the Case Study method that minimizes the iteration times through the transmitted processing procedure and type. The proposed method gave us the expectation that it will bring out the innovative improvement with respect to the time, expense, quality, and customer's satisfaction in the process from the analysis of business process to the analysis and design of system.

• Archives of Pharmacal Research
• /
• v.25 no.3
• /
• pp.357-363
• /
• 2002

The effect of a new rhFSH, PG-0801, on oocyte quality, ovulation and in vitro fertilization (IVF) was examined in androgen-sterilized mice. Experimental sterility was induced by a single subcutaneous injection of testosterone propionate (TP, 1 mg/head) into 5 day old female mice. Ovulation was generated in the 10 to 13-week old TP-injected mice by a subcutaneous rhFSH injection (1, 5 or 10 IU/head) followed 48 hours later by a second rhFSH injection (1, 5 or 10 IU/head). For comparison, a subcutaneous PMSG (5 IU/head) injection was used for folliculogenesis and a hCG (5 IU/head) injection was used for ovulation. These were administered using the same protocol. The eggs were harvested from the oviducts and counted 17 to 20 hours after the second injection. IVF was performed by adding sperms ($2{\times}10^{5}/ml{\;}to{\;}2{\times}10^{6}/ml$) to determine the functional activity of the eggs, and the fertilization rate was measured. In addition, the pregnancy rate and fetal development were examined after 15-17 days of gestation. The number of oocytes recovered from the rhFSH/rhFSH group increased dose-dependently and was slightly higher than that of the PMSG/hCG group. The pregnancy rates of the group receiving 1, 5, and 10 IU of rhFSH/rhFSH were 50%, 66.7%, and 75%, respectively, which were significantly higher than that of the control (untreated) group (0%). The numbers of viable fetuses in the 1, 5, and 10 IU/head of the rhFSH/rhFSH group ($8.0{\pm}1.50$, $8.9{\pm}1.02$, and $8.9{\pm}1.12$ fetuses/dam, respectively) were comparable to that of the 5 IU/head PMSG/hCG group ($9.4{\pm}0.94$). The mice receiving rhFSH/rhFSH and PMSG/hCG showed similar fertilization rates (around 65%) via the IVF procedure. These results demonstrate that a new rhFSH, PG-0801, may be useful for inducing ovulation in functionally infertile patients and for superovulation in ovulatory patients participating in assisted reproductive technology (ART) programs.

• Journal of Korean society of Dental Hygiene
• /
• v.3 no.2
• /
• pp.209-220
• /
• 2003

The purpose of this study was to examine how clients who visited dental institutions perceived client services, what sorts of client services were provided to them and to what extent they were satisfied with them. It's ultimately meant to seek ways to enhance and enlarge client services. A survey was conducted on 379 residents who used dental institutions in Seoul and Gyeonggi provinces, and the findings of this study were as follows: 1. 64.6 percent of the people investigated weren't aware of client services, and 33.0 percent viewed them as part of medical services. 77.5 percent had grievances about dental institutions they'd ever used. 2. The biggest complaint was that the dental treatments they received weren't covered by the dental insurance. As for how to solve their grievances, the largest group of them told the employees of the dental institutions about their complaints or didn't use them again. When asked whether the dental institutions took any steps to get rid of their grievances, the greatest group replied they had no idea. and the second largest group answered they took no measure. 3. By age and educational level, those who were in their 60s and up and stopped at elementary school were best cognizant of client services. Among client service variables, they were most satisfied with how the employees handled their complaints, and as to overall satisfaction, their willingness to revisit ranked highest. 4. Concerning connections among client service awareness, service variables and overall satisfaction level, their awareness of client services had a positive correlational relationship with every service variable and satisfaction level. Among the service variables, prompt client services and employee attitude were positively correlated to overall satisfaction level, but service procedure, facilities and information services exercised little impact on that. 5. As for what factors affected their content with client services, their client service awareness was identified as one of the important factors to influence their use of dental institutions, the outcome of their visit and their willingness to revisit. The above-mentioned findings suggested that dental institutions should strengthen publicity activities to inform people of client services, and encourage them to express their grievances. In addition, they should take an immediate action to remove their complaints, and try to get a successful feedback to offer higher-quality medical services and customer-oriented services.

• Journal of Hospice and Palliative Care
• /
• v.8 no.2
• /
• pp.200-208
• /
• 2005

Purpose: Palliative procedures or surgical interventions not only manage various symptoms of malignant gastrointestinal obstruction, but also improve the quality of life. We investigated the clinical characteristics and prognostic factors of terminal cancer patients with palliative procedures for malignant gastrointestinal obstruction. Methods: We retrospectively reviewed the medical records of 48 terminal cancer patients with palliative procedures for malignant gastrointestinal obstruction at Sam Anyang hospital from May in 2002 to May in 2005. We excluded patients with palliative tumor resection. We analyzed prognostic factors in symtom-free survival and overall survival using Kaplan-Meier method, univariate and multivariate analysis. Results: There were 25 males (52%) and 23 females (48%), and median age of 48 patients was 65 years. The most common cause of malignant gastrointestinal obstruction was colorectal (26 patients, 55%), followed by stomach (10, 21%). Twenty patients (42%) received previous treatment (chemotherapy, surgery, and radiotherapy) and 28 (58%) never received any. Eighteen of 20 had received chemotherapy. The most common symptom was pain (15 patients, 31%). Twenty three patients (48%) had Eastern Cooperative Oncology Group(ECOG) performance status of 1 or 2 score and 25 patients (52%) 3 or 4 score. The most common palliative procedure was colostomy and there was no mortality concerning the palliative procedures. By univariate and multivariate analysis, performance status was the only independent prognostic factor in overall survival and symptom-free survival. Overall survival was 150 days and symptom-free survival was 90 days. Conclusion:. We confirmed that perftatdormance status is significant independent prognostic factor in terminal cancer patients with palliative procedures for malignant gastrointestinal obstruction.

• Korean Journal of Ecology and Environment
• /
• v.41 no.3
• /
• pp.275-282
• /
• 2008

Water hardness is a significant parameter as related to aquatic toxicity of some heavy metals. Hardness dependent metals include cadmium, copper, chromium (III), nickel, lead, zinc and silver. Developed countries have applied the hardness correction procedure to derive the water quality criteria for protecting the aquatic organisms. In the present study, we investigated the hardness correction algorithms used in United States of America, European Union, Australia/New Zealand, and Canada, and analyzed the details associated with those algorithms. Toxicity values of heavy metals were definitely different after hardness correction for all of algorithms analyzed. We found that the hardness corrected toxicity values followed by the algorithms of USA and Australia/New Zealand were very similar or same, however they were slightly different for cadmium at the hardness less than 30 mg $CaCO_3\;L^{-1}$. Among the hardness correction algorithms studied, the algorithm used in Australia/New Zealand appears to be a good choice to apply in Korean situation due to its simplicity compared to the algorithm of USA.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.33 no.4
• /
• pp.368-375
• /
• 2013

Failure of small bore piping welds is a recurring problem at nuclear power plants. And the socket weld cracking in small bore piping has caused unplanned plant shutdowns for repair and high economic impact on the plants. Consequently, early crack detection, including the detection of manufacturing defects, is of the utmost importance. Until now, the surface inspection methods has been applied according to ASME Section XI requirements. But the ultrasonic inspection as a volumetric method is also applying to enforce the inspection requirement. However, the conventional manual ultrasonic inspection techniques are used to detect service induced fatigue cracks. And there was uncertainty on manual ultrasonic inspection because of limited access to the welds and difficulties with contact between the ultrasonic probe and the OD(outer diameter) surface of small bore piping. In this study, phased array ultrasonic inspection technique is applied to increase inspection speed and reliability. To achieve this object, the 3.5 MHz phased array ultrasonic transducer are designed and fabricated. The manually encoded scanner was also developed to enhance contact conditions and maintain constant signal quality. Additionally inspection system is configured and inspection procedure is developed.

• Korean journal of food and cookery science
• /
• v.21 no.1 s.85
• /
• pp.117-123
• /
• 2005

Washed rice was coated by spraying aqueous dandelion (Taraxacum officinale) extracts at 20, 30, 40 $^{\circ}$Brix and dried at room temperature. The coating procedure was conducted 5 mL/min for 10min. Property changes in the dandelion coated rice and un-coated cooked rice were observed during 2 days of storage. Increasing the coating concentration was associated with lower color values (L, a value) and moisture contents. Sensory and texture properties generally decreased in the cooked rice coated with dandelion more than the control (non-coated rice). But, D-20(20 $^{\circ}$Brix of the dandelion concentration) resulted in better textural properties and sensory scores for hardness and overall acceptability in cooked rice. Compared to the control, the washed rice coated with 20 $^{\circ}$Brix for 0 and 2 days showed better quality in sensory activities, a lower gel consistency and better textural activities. It was concluded that the optimum coating ration of rice and added dandelion extract for cooking were 20 $^{\circ}$Brix and $5\%$ respectively, in proportion to the total weight of raw rice.