• Journal of Korean Society of Water and Wastewater
• /
• v.26 no.6
• /
• pp.871-881
• /
• 2012

This study suggested a model that can predict a degradation condition over time of two plastic pipes, PE and PVC, which are currently used in the country. This study was analyzed physical characteristics change of plastic pipes by comparison with initial physical characteristics (on the case of new pipes). Since this is dependent on accidents that already occurred, there are limitations that it only decides a priority on improvement based on relative corrosion status rather than precautionary aspects. The comparison results between physical degradation by the deducted performance rating and a conventional numerical scoring method showed that correlation coefficient was 0.67 for PE pipes and 0.86 for PVC pipes, indicating a high correlation. According to this result, it has been decided that the performance rating suggested herein can be applied naturally to the criterion of an improvement decision, which was based on Scoring System. From results of the research, it is expected that a reliable result can be provided to an improvement decision process related to degradation of plastic pipes by comprehensively comparing and evaluating a condition of pipe materials(direct factors) and an environmental impact(indirect factors).

• Journal of Digital Convergence
• /
• v.17 no.5
• /
• pp.23-31
• /
• 2019

This study aims to build an AHP model that evaluates the priority of cyber security policies for the Azerbaijan information system. For this, 4 factors were constructed from components of ITU National Interest Model, whereas 5 alternatives were based on the best practices of the eight developed countries leading the cyber security field. Using the questionnaire, 24 security experts evaluated the strategic priority of such factors or alternatives. The analysis results using the AHP software showed that homeland defense and economic well-being were the dominant aspects of cyber security policy, whereas capacity building and infrastructure were the main concern of cyber security elements for Azerbaijan. This study presents the strategic priority of cyber security policies that can be adopted by Azerbaijan government. This study can contribute to developing the national cyber security guide of Azerbaijan.

• Proceedings of the ESK Conference
• /
• 1998.04a
• /
• pp.93-98
• /
• 1998

Recently, consumers are tend to purchase the user-centered designed product using interface enginnering and human factors techniques. Therefore, it is important that the designer's requirements should be analyzed focused on the human machine interface. This paper described the interface usability evaluation technique(suvjective evaluation) for the interface between user and product. This methodology is the integrated interface usbility evaluation method AHP and Conjoint Analysis. AHP(Analytic Hierarchy Process) is a multicriteria decision model to give priority after expressing hierarchically for decision making problem. Conjoint Analysis enduavors to unravel the value, or partworths, that consumers place on the product or service's attributes from experimental subjects' evluation of profiles based on hypothetical products or services. A new usability test methodology proposed by this paper includes techniques jointed both consistency test by AHP and experimental subjective evaluation of profiles by Conjoint Analysis for evaluating the user's emotion and impression.

• Journal of the Korean Society for Precision Engineering
• /
• v.7 no.3
• /
• pp.66-74
• /
• 1990

This paper presents a knowledge-based computer aided process planning system that automatically selects machine tools, machining operations and cutting tools and determines sequences of the machining operations for prismatic parts in die manufacturing. In the proposed system, parts are described by manufacturing features and grouped into part families based on the functions. Each part is repressented by a part frame which consists of basic data and manufacturing features. Knowledge for manufacturing is acquired from the domain expert and represented by frames. A decision model for selection of machine tools, machining operations and cutting tools and for determining sequences of the machining operations are developed by employing the Mealy machine in finite automata with output. The decision procedure and the order of priority which inputs manufacturing features into the Mealy machine are represented by rule for each part family. Backward chaining is used for the proposed system. The proposed system is implemented by using TURBO-PROLOG on the IBM PC/AT. A case study for the slide core is presented to show the function of the proposed system.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2006.11a
• /
• pp.698-701
• /
• 2006

Various improvement methods to treat settlement and stability of structures on soft foundation, that is now continuously introduced after being scrutinized. Therefore, it is very important to select the most suitable method among these various ones. In this study, quantifying the importance of effective factors when making decision, inducing priority and significance weight, systematic standard is proposed for technical, economic factor in making selection of soft foundation improvement method.

• Journal of the Korea Society of Computer and Information
• /
• v.4 no.4
• /
• pp.226-235
• /
• 1999

The purpose of this study is to present models for evaluation and selection of Electronic Commerce systems suppliers. The Major concern of management is that almost all decision problems have multiple, usually conflicting, criteria. The fuzzified multi-objective programming models are given to accommodate the aspiration level and satisfaction level of decision makers. The proposed models are classified into three types, that is, min-operator. additive and pre-emptive priority. Numerical Examples illustrating each type of model are presented and the implications of these models are discussed.

• Journal of applied mathematics & informatics
• /
• v.9 no.1
• /
• pp.197-211
• /
• 2002

In this paper, we propose a multi-Criteria decision making approach to address the problem of finding the best possible solution in credit unions. Sensitivity analysis on the priority structure of the goals has been performed to obtain all possible solutions. The study uses the Euclidean distance method to measure distances of all possible solutions from the identified ideal solution. The possible optimum solution is determined from the minimum distance between the ideal solution and other possible solutions of the Problem.

• Journal of Korea Technology Innovation Society
• /
• v.7 no.2
• /
• pp.397-412
• /
• 2004

The importance of maritime sector in Korea has been increasingly recognized in recent days. As the country enters the $\ulcorner$new ocean era$\lrcorner$ the oceans are often regarded as holding the keys to solve the problems of modem industry associated with changing environment as well as changing societies and national politics. This paper attempts to address the national maritime R＆D policies and their relative importances. In the methodology, Saaty's analytic hierarchy process model is used to evaluate and rank the selected maritime R＆D projects which have a wide range of characteristics and policy implications. The criteria used for policy evaluation relates specifically to the Korea's evaluation needs and culture, and those criteria are weighted according to their relative importance as perceived by the maritime R＆D specialists.

• Journal of Korea Port Economic Association
• /
• v.20 no.2
• /
• pp.169-185
• /
• 2004

It is an urgent problem that Korea logistics enteprises' expansion of advance into China market and the logistics network establishment between Korea and China to back up the former are to be solved. Accordingly, the purpose of this study is to deduce the subjects to establish the logistics network between Korea and China, and to evaluate the priority order. The results of this research are as follows: First, we conducted face-to-face interviews on the advisery group in China and Korean enterprises which advanced into China, and drew out 6 promoting subjects to build the logistics network between the two. Second, the AHP model was adopted, which is a multi-criteria?multi-hierarchical decision making method, to draw out the weight and priority order of the deduced 6 promoting items. Third, the resultant priority order of the promoting subjects is as follows: No.1 - to establish the distribution & logistics support center by region(0.3900); No.2 - to support various taxes in investing the logistics business abroad(0.1980) ; No.3 - to improve the management of CIQ(0.1958); No.4 - to back up the joint-venture of logistics firms(0.1169); No.5 - to enhance trade and foreign policies to deregulate the entry into logistics markets(0.0536); No.6 - to construct the logistics information system of China(Northest Ssia)(0.0458). This paper resulted in finding out Korea logistics enterprises that have not secured their own inland-transport network in China and the actual difficulties of Korean enterprises with using the inferior network that advanced into China. These problems were developed into the analysis adopting the AHP method, and the significancy of this paper is to present the priority order of promoting problems using a sophisticated technique.

• Journal of the Korea Society of Computer and Information
• /
• v.6 no.2
• /
• pp.143-151
• /
• 2001

The purpose of this study is to present the model for introduction of pharmacy information systems after medical reform. AHP(analytic hierarchy process) method is used to compute preference over factors which are included in the introduction of information systems. The fuzzified mu1ti-objective programming model is given to consider the aspects of resource and to accommodate the aspiration level and satisfaction level of decision makers. Numerical examples illustrating interpolated model are presented to accommodate the uncertainty of priority and the implications of this model is discussed.