• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.11
• /
• pp.802-809
• /
• 2017

3D printing technology is a manufacturing process for products, in which polymer and metal materials are laminated to form structures. It is advantageous for manufacturing parts requiring a high degree of design freedom and functionality. In addition, it would be a suitable technology for the production of parts for railway vehicles in the future, due to the need to produce parts in small quantities. In order to fully exploit the advantages of 3D printing technology, it is necessary to consider the process characteristics during the design of the product. In this study, the redesign and manufacturing technology of the product considering the performance and process conditions were studied for the heat exchanger in the air compressor of railway vehicles, as a trial application of the 3D printing technique. First of all, the design concept to improve the performance of the heat exchanger was defined, and the design range was specified to satisfy the performance of the present heat exchanger analyzed experimentally. Then, the detailed design was revised considering the characteristics of the metal 3D printing process, such as the manufacturing restrictions and production time. Based on the final design, the product was fabricated by the 3D printing process using aluminum material, and it was confirmed that the dimensional accuracy was satisfied. The weight of the final product was reduced by 41% compared with the existing products. The results of this study will make it possible to develop an efficient product design process for 3D printing technology.

• Journal of Fashion Business
• /
• v.15 no.5
• /
• pp.43-54
• /
• 2011

Digital Textile Printing(DTP) is appropriate for quick response system(QRS) and is closely connected with high value added fashion industry. Fashion products of high price are mainly silk and cotton. For high quality DTP products, it is important to optimize the parameters of media, pre and after-treatment, ink, printer, etc. DTP for these two fiber materials is also accompanied certainly with steaming as after-treatment process for coloration. Role of steam is like water in exhaustion dyeing. Steam can diffuse dye or ink in printing paste to fiber. Quality of DTP products depend on after-treatment processes such as steaming, washing, drying. Current production amount of DTP is smaller than one of conventional textile printing. However conventional after-treatment system has been using so far. This is mismatched with DTP in terms of process efficiency, spot work of small lot, quality control. In this study, continuous after-treatment system has been suitably designed for DTP that washing and drying are available after steaming. So, It is possible to improve efficiency of DTP process. Especially, the effects of after-treatment process, such as temperature of heat drum, steaming time on printability, color difference, color fastness were examined. Two types of samples(cotton knit and silk fabrics) were used. The results were obtained as follows : First, there is no a wide difference between the K/S values of cotton and silk treated with continuous after-treatment system and those of sample treated with conventional printing after-treatment method. So it is more effective to use the continuous after-treatment system than conventional printing after-treatment system in case of the daily throughput of 1,000 yards below. Second, after continuous after-treatment for DTP, K/S values were increased and lightness($L^*$) values were decreased. ${\Delta}E$ values were below 2.3. Third, DTP samples treated with continuous after-treatment system were tested for fastness(washing, light, rubbing). Grades of fastness(washing, light, rubbing) were above 3 grade.

• Textile Coloration and Finishing
• /
• v.32 no.3
• /
• pp.135-141
• /
• 2020

The primary and secondary alcohols in cellulose reacted with acrylonitrile(AN) in the presence of strong alkalis to form cyanoethylated cellulose. The partially cyanoethylated cotton(CEC) fabric with AN in the presence of aqueous sodium hydroxide solution was described, including effects of treatment time and reagent concentrations. The weight increases of cotton fabric were shown to be linearly related to the treatment time, temperature and concentration of sodium hydroxide. The physical properties such as shrinkage ratio and tensile strength were proportional to the weight increases without significant impact on elongation. But the moisture regain decreased with decreasing hydrophilicity. The degree of substitution(DS) and transfer ratio were linearly related to the weight increases. In the CEC with increasing weight up to 24.9%, it has been obtained with DS up to 0.63-0.67 cyanoethyl groups per anhydroglucose and transferring ratio up to 87.7%. The color fastness to washing by sublimation transfer printing was improved by the cyanoethylation.

• The Journal of the Korea Contents Association
• /
• v.13 no.8
• /
• pp.52-59
• /
• 2013

Recently, the importance of the efficient production pipeline design has been increased for 3D animation, which becomes more delicate. In this paper, we propose 3D animation character development pipeline using 3D printing technology. We introduce 3D printing procedure into each step of the classical 3D animation and character development pipeline to incorporate the feed-back from the designer immediately. Specially, during the production step, we can find the design errors and minimize the period of production by using 3D printing of approximate shape of designed character. Using proposed method, eight DreaMegg characters were developed and their quality was very high with respect to 3D virtual graphics and real product. Using our method, high-quality 3D animation character can be developed with the minimized time and cost for development by reflecting the feed-back into production line from designers and researchers immediately.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.12
• /
• pp.1415-1420
• /
• 2014

3D printer is based on an additive manufacturing technology, which helps in creating the three-dimensional object using a 3D drawing. It is used in various fields, because it prints out a variety of three-dimensional products in a short period of time. In this paper, we consider a technique using the FDM(Fused Deposition Modeling) method by dissolving the ABS(Acrylonitrile Butadiene Styrene) resin among a diversity of printing technique and materials. This kind of the 3D printer prints out a product in high temperature and cools down it. In this process, a flection phenomenon is occurred according to the size of the printing product and the surrounding environment. Conventional methods for mitigating this phenomenon maintain the temperature at the optimum level, but they require using additional devices. In order to minimize the flection phenomenon in 3D printing products without additional devices, in this paper, we propose a noble technique, which creates holes on suitable positions when they are designed by 3D drawing tools. Also, we suggest mathematical model for the proposed method, and measure and analyse a printing output using a proposed technique.

• Journal of the Korean Society of Radiology
• /
• v.14 no.3
• /
• pp.303-311
• /
• 2020

Scattering-ray generated during plain radiography can cause secondary exposure to organs and tissues other than the target area. Currently, Shielding devices used to reduce radiation exposure are mostly used for radiation protection of workers, and radiation protection of patients is rarely performed. Therefore, this study intends to evaluate the organ dose by scattered-rays and the effectiveness 3D printing materials as a radiation shielding device during plain radiography through simulation. As a result, the absorbed dose for each organ at the time of examination showed a high effect due to the secondary scattering-ray as the distance from the source was close and the organ closer to the skin surface. The dose reduction effect due to the use of 3D printing shielding devices to protect this showed a higher shielding effect in the case of mixed printing materials compared to plastics.

• Journal of International Society for Simulation Surgery
• /
• v.3 no.1
• /
• pp.36-38
• /
• 2016

Fibrous dysplasia is a relatively rare disease but the management would be quite challenging. Because this is not a malignant tumor, the preservation of the facial contour and the various functions seems to be important in treatment planning. Until now the facial bone reconstruction with autogenous bone would be the standard. Although the autogenous bone would be the ideal one for facial bone reconstruction, donor site morbidity would be the inevitable problem in many cases. Meanwhile, various types of allogenic and alloplastic materials have been also used. However, facial bone reconstruction with many alloplastic material have produced no less complications including infection, exposure, and delayed wound healing. Because the 3D printing technique evolved so fast that 3D printed titanium implant were possible recently. The aim of this trial is to try to restore the original maxillary anatomy as possible using the 3D printing model, based on the mirrored three dimensional CT images based on the computer simulation. Preoperative computed tomography (CT) data were processed for the patient and a rapid prototyping (RP) model was produced. At the same time, the uninjured side was mirrored and superimposed onto the traumatized side, to create a mirror-image of the RP model. And we molded Titanium mesh to reconstruct three-dimensional maxillary structure during the operation. This prefabricated Titanium-mesh implant was then inserted onto the defected maxilla and fixed. Three dimensional printing technique of titanium material based on the computer simulation turned out to be successful in this patient. Individualized approach for each patient could be an ideal way to restore the facial bone.

• Journal of Korean Library and Information Science Society
• /
• v.13
• /
• pp.1-28
• /
• 1986

An outline of the scope and history of encyclopaedias is essentially a guide to the story of the development of scholarship, for encyclopaedias stand out as landmarks throughout the centuries, recording much of what was known at the time of publication. the early stage of encyclopaedias originated a summaries of scholarship in forms comprehensible to their readers, so that compiled their works single-handedly. The impact of Christianity brought a new phase in Western encyclopaedia making. As religion is emphasized in the encyclopaedias of those time, it pervades the whole of their contents. It was made for Christian education. The general trend in treatment in the Middle ages was arranged by subject. Most of the encyclopaedias issued before the introduction of printing into Europe having been arranged in a methodical or classical form, the alphabetically arranged encyclopaedia has a history of less than 1000 years. By influence of printing and Renaissance, a turning point came with encyclopaedia making. There were just as increasingly preferred to put practical topics first. Until those time, thought in terms of arranging their entries in alphabetical order has already familiarized. By generalization of public education in 19th-century, there were increasingly the number of purchasers so that prevailed commercial publication. It was those time that was settled the features of contemporary such as multivolume compendium of all available knowledge, complete with maps and a very detailed index, as well as numerous adjuncts such as bibliographies, illustrations, lists of abbreviations and foreign expressions, gazetteers, and so on.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.4_2
• /
• pp.561-570
• /
• 2023

This study was to evaluate the effect of different rinsing times and methods on the accuracy of temporary prostheses fabricated by 3D printing method. Sixty temporary prostheses were fabricated with LCD types of 3D printer(Halot-Sky, Creality, Shenzhen, China) and divided into six groups (n = 10) based on rinsing times and methods. All specimens were rinsed with 99% isopropanol alcohol for 5 and 10 min using three methods-hand washed, ultrasonic cleaning, and automated washing. All specimens were polymerized for 3 minutes under the same conditions. The marginal and internal gaps of specimens were examined using a replica technique. The light-body silicone thickness was measured at 6 reference points(Absolute marginal discrepancy, Marginal, Chamfer, Axial, Angle, and Occlusal gap). All measurements were performed by a stereomicroscope. Reference point images were taken at 100× magnification and then measured using an image analysis program. Statistical analysis was performed using Two-way ANOVA, One-way ANOVA, and the Kruskal-Wallis test (p = .05). The marginal and internal gaps were statistically different according to the rinsing methods and rinsing times(p < .001). In the rinsing time, the temporary prosthesis rinsed for 5 minutes group showed higher accuracy than 10 minutes group. In the rinsing method, the hand washing group showed higher accuracy than the automated washing group.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.24 no.2
• /
• pp.41-48
• /
• 2018

A printable time temperature integrator (TTI) consisting of oxygen indicator and cover films with various oxygen permeability was developed. The printing ink contained methylene blue (oxygen indicator) which changed in color during storage. $TiO_2$ and glycerol for UV-activation of TTI and zein and ethanol for printing performance were also contained in the printing ink. The cover film on the ink was employed to control the color change rate and temperature dependency (Arrhenius activation energy, $E_a$) by using the different films (PE, PET, OPP, and LLDPE). The film properties were varied by annealing. TTI was produced by silk screen printing. As a result, the color change rates were different for the cover films, being the highest in TTI with LLDPE, followed by OPP, PE, and PET. The rate decreased with increase in the cover film thickness. The $E_a$ was the highest in TTI with LLDPE, followed by OPP, PE, and PET. The $E_a$ did not change with the cover film thickness. The annealed PVC and PET film were lower in oxygen permeability than the unannealed ones, indicating the lower color change rate.