• 한국인쇄학회지
• /
• 제28권1호
• /
• pp.1-13
• /
• 2010

Gravure printing and manufacturing of advanced electronic components in a way that is going extra hold position. It is to print the electronic components of the rapid productivity improvements as well as cost-saving and environment-friendly industries such as the transition is a big advantage. However the mechanism of gravure is difficult to study scientifically because of high speed and excessively small size of the cell. To approach the mechanism we experimented using gravure printability. The condition of variables of IGT is pressure and velocity. By using Flow-3D simulation software, we built up the theoretical model under the constant variables. Then, we compared the real test with the simulation results. Therefore, it is studied the mechanism of gravure scientifically and it can be analysed the effect of the variable conditions.

• 한국인쇄학회지
• /
• 제12권1호
• /
• pp.1.1-11
• /
• 1994

The photosensitive properties and carrier transport in the organic photoconductor with the carrier transport layers(CTL) of polymer matrix doped with two carrier transport materials above carrier generation layer(CGL) containing oxotitanium phthalocyanine (TiOPc) were investigated. The CGL of TiOPc dispersed in poly(vinylbutyral) was formed as thickness of 0.1${\mu}{\textrm}{m}$and the carrier transport layer was prepared by coating polycarbonate and polyester doped with oxadiazoly(OXD), polyvinylcarbazole (PVK), trinitro fluorenone(TNF) as thickness of 10~15${\mu}{\textrm}{m}$, respectively. We have measured half decay exposure,sensitivity and xerographic gain from the photo-induced discharge curve(PIDC). In this work, it was found that the characteristics of carrier transport were mainly caused by the ionization potential difference of constitutive materials in molecularly doped polymer.

• 한국인쇄학회지
• /
• 제12권1호
• /
• pp.145-157
• /
• 1994

Litho printing ink vehicles based on rosin modified phenolic are faster drying, have better durability, are harder and glosser and have greater resistance to water than ones based on ester gums. Ink-Water balance and rheological properties are important in litho printing process. These physical properties is concerned with molecular weight of Resin to use vehicle. So this paper was studied about the effects of changing molecular weight of Rosin modified phenolic on surface tension, viscosity, pseudoplasticity and printability of Litho Inks. The results were as follows. 1) The surface tension of model inks depended on the molecular \veight of the resin : Dispersion componnent of ink increase but non dispersion component decrease as molecular weight of Resin increase. 2) Water pick-up of litho ink is more fast balance, using low molecular weight of Resin. 3) Viscosity, Yield value and Newtonian value of model inks increase as molecular weight of Resin increase. 4) The litho ink prepared with the modified phenolic of which molecular weight is about 20000 showed the highest printing density and gloss.

• 한국인쇄학회지
• /
• 제23권1호
• /
• pp.53-63
• /
• 2005

The quality of the print can be specified through the quality of the coloring, the reproduction of fine structures and the range of tone values. Also, package printed quality are controlled by this points. In this paper, densitometry method was used for printed quality. By densitometry we can get the print density and the parameters of each conditions that characterize halftone printing, such as dot gain and relative printing contrast. Also, we have proposed the optimizes range of the parameters such as density, dot gain etc. to the package printed printability control.

• 한국인쇄학회지
• /
• 제22권2호
• /
• pp.101-110
• /
• 2004

The local surface strength variation of coated papers were measured at various speeds on a number of coated paper samples to study the effects of speed and ink tack on coating pick. Coating pick phenomenon is observed in an ink transfer variation curve as a decrease in the slope of the curve. On the other hand, it causes an actual decrease in net ink transfer to paper with an increase in speed. The effect of speed on coating pick depends on ink tack, ink film thickness and surface properties of coating layer formation of paper. A novel device to measure the surface strength can rate the coating paper in a different order. Comparison are made between dry test of coating paper pick and wet coating pick test of printing in IGT printability tester. Coating formulation is the main key to prevent from coating pick. The binder level increases, the coating pick and the slop decrease. The piling on blanket in printing is a problem when the coating pick is occur on a local area rather than average surface strength of coated papers.

• 한국인쇄학회지
• /
• 제15권2호
• /
• pp.57-76
• /
• 1997

A color halftoning is the process of generating halftone images for the different color plans, for example, cyan, magenta, yellow, and black for a offset printing device. A conventional halftone technique, so called AM screening, is simple and easy to implement, but the halftoned dot patterns by using this method is not free for the moire` fringe. Moire` patterns are caused the power spectrum distribution on low spatial frequency domain. To avoid Moire` patterns, the conventional screen require the different screen angles for each color plans. Recently, Ultra-fine and 7 color printing methods are developed to expend the color gamut. In 7 color printing method must be used the halftone technique of random and blue noise characteristic to avoid Moire` fringe.

• 한국인쇄학회지
• /
• 제14권1호
• /
• pp.55-74
• /
• 1996

In the today, regarded as a science on photography, the role of the lens and sensitized is important. In this research, we manufactured a hand-made lens which is based on the general purpose lens, and made a diapgragm. We measured the quantity of light and resolving power, and take pictures with it. The purpose of this research is to figure out the characteristics of our hand-made lens and maximize its usefulness. The result showed that (1) quantity of light and resolving power through hand-made lens are distributed constant. (2)Our lens had the characteristics of a soft lens and (3)it had much chromatic abberation. Therefore, we found that the hand-made lens is th acquire visual image such as the effects of a specialized lens.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 1999년도 Pre-symposium of the 10th ISWPC Recent Advances in Paper Science and Technology
• /
• pp.394-397
• /
• 1999

The relation between the paper formation analyzer by image process system and smoothness, compressibility uniform of ink absorption is studied. There results indicate that the paper with bad formation has higher apparent bulk than the paper with good formation. The bad formation of paper results in the nonuniform calendering and decrease of the compressibility. The bad formation of paper also results in deformation and omission of printing dots, which affects the reproduction of the printing images.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.1
• /
• pp.153-159
• /
• 2006

Red algae were used to make bleached pulp, from which paper handsheet samples were made. Red algae consists of rhizoidal filaments, epidermal tissues whose color were reddish, mucous carbohydrates, and other minor elements. Rhizoidal filaments of high brightness were obtained after extracting out mucous carbohydrates, and bleaching the remainder by using bleaching chemicals. The sizes and shapes of several rhizoidal filaments (or red algae pulp) from different red algae species were examined, and their handsheet properties were compared. Transparent and transluscent high density paper samples were made without applying refining process from the red algae pulp. White paper samples with good printability and excellent formation were made. We are developing pilot scale pulping and papermaking facilities at this time.

• 펄프종이기술
• /
• 제34권2호
• /
• pp.22-31
• /
• 2002

In this paper, PVA(polyvinylalcohol), oxidized starch and SBR latex were used as binders for ink-jet printing papers, and their effects of the type and blending ratio of binders on ink-jet printing properties were compared. In case of coating color using PVA mainly used for a binder in ink-jet printing, spreading of printed letters decreased and excellent images were manifested resulting from strong hydrophilic of PVA. However, increasing solids content of coating color was somewhat limited because of the interaction of PVA and functional groups in silica as well as high molecular weight of PVA. When oxidized starch and SBR latex were mixed with PVA at desirable ratio to solve these problems, runnability in coating process was improved and good printing properties were shown. Gloss was improved when latex was used along with PVA as a binder because of the thermoplastic property of the latex. From this result, possibilities of high solids content and high gloss ink-jet printing papers were investigated.