• 한국주조공학회지
• /
• 제24권2호
• /
• pp.85-93
• /
• 2004

Mechanical property of hypereutectic Al-Si alloy is changed according to size and distribution of primary Si. Consequently, the study on the refinement for primary Si is progressed for a long time. But such effect of refinement comes out fading phenomena with the lapse of time. Therefore, this study investigated the optimum condition of primary Si refinement for hypereutectic Al-Si alloy. And we observed various primary Si size with P's fading phenomena. The experiment results were as follows. For experiment of primary Si refinement, we made hypereutectic Al-Si alloy with various amounts of P addition. As a result of experiment, we obtained the fine microstructure at 0.01wt.%P. And the optimum condition of P addition, for preventing from growth of primary Si by P fading, is estimated 0.1wt.%P.

• Asian Pacific Journal of Cancer Prevention
• /
• 제15권22호
• /
• pp.9759-9761
• /
• 2014

Purpose: To compare tumor size by mammography and sonography and align with pathological results in primary breast cancer cases. Materials and Methods: We retrospectively reviewed 95 primary breast cancer patients who underwent mammography and sonography from January 2011 to June 2012. The largest tumor diameter was chosen as sizing reference for each imaging modality. The measurements of mammography and sonography were considered concordant if they were within the measurement of pathological results ${\pm}0.5cm$. Pearson's correlation coefficient was calculated for imaging results. Results: The range of the maximum diameter was 0.6cm-10.5cm and mean value was $3.81{\pm}2.04cm$ by pathological results, 0.7cm-12.4 cm and $3.99{\pm}2.19cm$ by mammography, and 0.9cm-11.0cm and $3.63{\pm}2.01cm$ by sonography, respectively. Sonography (R: 0.754), underestimated tumor size, but had a better correlation with pathological tumor size compared to mammography (R: 0.676), which overestimated tumor size. Conclusions: Sonography is superior to mammography in assessment of primary breast cancer.

• 농촌계획
• /
• 제23권1호
• /
• pp.97-112
• /
• 2017

Stability of labor market in rural areas was analyzed in this paper with categories of industrial group, employment scale, surviving period, and founder group. The stability of each classified labor market was compared with each other to figure out the stable business class and the unstable class in rural areas. The results of rural areas were compared with those of urban areas. The stability was analyzed with average and coefficient of variation (C.V.) of annual total employees' change rates. It was revealed that labor market of 'primary industry', including agriculture, is unstable. Especially, labor market of 'mid-size' and 'primary industry' businesses founded as 'incorporated company' in rural areas is vulnerable. While labor market of 'large-size' is proved to be unstable, it is confirmed that 'small-size' or 'mid-size', and 'over-ten-year survived' businesses have positive contribution to the stable labor market in rural and urban areas. The results show that the stability of labor market is different in each category of business and in each region of rural or urban area. It is expected that the results can be utilized for the regional development policies, of labor and industry part.

• 대한임상전기생리학회지
• /
• 제10권2호
• /
• pp.37-42
• /
• 2012

Purpose : This study is to examine the effect of electrode size during transcranial direct current stimulation on hand function. Methods : By randomly assigning 26 right hand dominant subjects to two groups (I: carbon rubber electrode / II: disposable circular self-adhesive electrodes) with 13 subjects in each group depending on the electrode size, a positive electrodeof transcranial direct current stimulation was placed on the primary motor area (C4) and a negative electrode was placed on the left primary motor area (C3) and the stimulation was applied for 20 minutes.Hand function assessment before and after transcranial direct current stimulation were measured with JTT (Jebsen-Taylor hand function test). Results : According to hand function assessment by JTT, there were no interactions on both hands, and statistically significant differences according to time appeared in the main effect test. Conclusion : Regardless of the electrode size, it appears that transcranial direct current stimulation on the primary motor area activated hand function affected.

• 한국의류산업학회지
• /
• 제4권2호
• /
• pp.163-168
• /
• 2002

For the purpose of investigating the factor of foot and calf growth of primary-school children who are fast-growing during this period a group of the 1st graders of primary-school had been the subject of this measurement in 1995 and there after they became the subject again in 1997, 1999 when they were the 3th, 5th graders measurement was carried out in 30 items including status and weight and marthin-type measure and foot-print were used for this measurement as the result, stature is correlated with height items and length items of foot and calf weight is correlated with width and circumference items of foot and calf angle of the first toe showed the highest growth like 3rd graders, heel circumference had rapidly grown rather than in the part of foot circumference in the factor analysis df foot measurement of 10-year, the first, second factors, appeared the size of shoes, in case of 12-year the first factor with status appeared the size of shoes.

• 한국산업융합학회 논문집
• /
• 제17권3호
• /
• pp.122-135
• /
• 2014

This paper was studied on the horizontal continuous casting of Al-xSi(x=10~15%) aluminum alloy. The experiments of the horizontal continuous casting was carried out by the horizontal continuous casting machine for various casting conditions and investigated on fracture types and mechanisms. Surface defect types for the horizontal continuous casting is also investigated. And the study was carried out that the horizontal continuous casting conditions such as casting temperature, cooling rate, and drawing speed affect the hardness and primary silicon size of Al-xSi(x=10~15%) aluminum rod bar. Casting temperature within this experiment conditions don't affect on the hardness of rod bar but the higher casting temperature is the smaller primary silicon size. The higher cooling rate and drawing speed have the higher hardness and the smaller primary silicon size.

• Communications for Statistical Applications and Methods
• /
• 제15권3호
• /
• pp.379-386
• /
• 2008

In this paper, the choice of a primary resolution and wavelet basis functions are introduced under random or irregular design points of which the sample size is free of a power of two. Most wavelet methods have used the number of the points as the primary resolution. However, it turns out that a proper primary resolution is much affected by the shape of an unknown function. The proposed methods are illustrated by some simulations.

• 한국입자에어로졸학회지
• /
• 제9권1호
• /
• pp.7-21
• /
• 2013

Twelve-hour size-resolved atmospheric aerosols were measured to determine size distributions of water-soluble organic carbon(WSOC) during daytime and nighttime, and to investigate sources and formation pathways of WSOC in individual particle size classes. Mass, WSOC, ${NO_3}^-$, $K^+$, and $Cl^-$ at day and night showed mostly bimodal size distributions, peaking at the size range of $0.32-0.55{\mu}m$(condensation mode) and $3.1-6.2{\mu}m$(coarse mode), respectively, with a predominant condensation mode and a minor coarse mode. While ${NH_4}^+$ and ${SO_4}^{2-}$ showed unimodal size distributions which peaked between 0.32 and $0.55{\mu}m$. WSOC was enriched into nuclei mode particles(< $0.1{\mu}m$) based on the WSOC-to-mass and WSOC-to-water soluble species ratios. The sources and formation mechanisms of WSOC were inferred in reference to the size distribution characteristics of inorganic species(${SO_4}^{2-}$, ${NO_3}^-$, $K^+$, $Ca^{2+}$, $Na^+$, and $Cl^-$) and carbon monoxide. Nuclei mode WSOC was likely associated with primary combustion sources during daytime and nighttime. Among significant sources contributing to the condensation mode WSOC were homogeneous gas-phase oxidation of VOCs, primary combustion emissions, and fresh(or slightly aged) biomass burning aerosols. The droplet mode WSOC could be attributed to aqueous oxidation of VOCs in clouds, cloud-processed biomass burning aerosols, and small contributions from primary combustion sources. From the correlations between WSOC and soil-related particles, and between WSOC and sea-salt particles, it is suggested that the coarse mode WSOC during daytime is likely to condense on the soil-related particles($K^+$ and $Ca^{2+}$), while the WSOC in the coarse fraction during nighttime is likely associated with the sea-salt particles($Na^+$).

• Asian Pacific Journal of Cancer Prevention
• /
• 제15권24호
• /
• pp.10791-10795
• /
• 2015

Background: Phyllodes tumors of the breast are rare fibroepithelial lesions, so relatively little is known about this disease entity. The present study was designed to identify differences in clinical features between benign borderline and malignant phyllodes tumors. Materials and Methods: Data from 246 women with phyllodes tumors of the breast treated in Cancer Hospital Chinese Academy of Medical Sciences between 2002 and 2012 were collected and analyzed, including age at presentation, age at treatment, course, size of primary tumor, location, histological type, type of surgery and treatment, local recurrence, distant metastasis, fibroadenoma history, disease-free survival and number of mitosis per 10hpf. There are 125 (55%) benign, 55 (24%) borderline and 47 (21%) malignant tumors. Results: In univariate analysis, average age at presentation, average age at treatment, size of primary tumor, ulceration or not, type of primary surgery, distant metastasis and number of mitosis per 10 hpf turned out to be statistically different among the three PT types (p=0.014, 0.018, <0.000, 0.003, <0.000, 0.001 and <0.000, respectively), while recurrence and disease-free survival (DFS) demonstrated trends for statistical significance (P =0.055 and 0.060, respectively). Multivariate analysis revealed distant metastasis and excision were significantly different in benign, borderline and malignant phyllodes tumors of the breast (p=0.041 and 0.018, OR=0.061 and 0.051). At the same time, size of primary tumor with p=0.052 tended to be different between groups (OR=1.127). However, age at treatment, ulceration and DFS showed no statistically significant variation (p=0.400, 0.286 and 0.413, respectively). Conclusions: Benign borderline and malignant phyllode tumors have different distant metastasis risk, different primary tumor size and different surgical procedures, and malignant PTs are more likely to be bigger and to metastasize.

• 한국자동차공학회논문집
• /
• 제18권1호
• /
• pp.120-126
• /
• 2010

It was known that the excellent wear resistance of hyper eutectic aluminum alloy is based on the primary Si particles which are distributed in the base metal. When the primary Si volume fraction increases, the smaller size have excellent wear resistance characteristics. However, this trend always does not match. There is no investigation result based on the materials and methods for real using parts. In this study, using the automotive parts manufacturer currently in use hyper eutectic Al alloy tensile test specimen type sample was fabricated by 350Ton high pressure die-casting machine. Then, fluidity, tensile, impact and wear resistance properties were evaluated. If the casting quality, primary Si size, fraction and distribution are similar, mechanical properties and wear resistance are equivalent.