• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.231.1-231.1
• /
• 2015

Surface energy, being an important material parameter to control its interactions with the other surfaces plays a key role in bio-related application. Carbon films are found very promising due to their characteristics such as wear and corrosion resistant, high hardness, inert, low resistivity and biocompatibility. The present work deals with the deposition of carbon films using unbalanced facing target magnetron sputtering technique. The discharge characteristics were studied using optical emission spectroscopy and correlated with the film properties. Surface energy was investigated through contact angle measurement. The ID/IG ratio as calculated from Raman spectroscopy data increases with the increase in power density due to the higher number of sp2 clusters embedded in the amorphous matrix. The deposited films were smooth and homogeneous as observed by Atomic force microscopy having RMS roughness in the range of 1.74 to 2.25 nm. It is observed that electrical resistivity and surface energy varies in direct proportionality with operating pressure and has inverse relation with power density. The surface energy results clearly exhibited that these films can have promising applications in cell cultivation.

• 대한기계학회논문집B
• /
• 제28권6호
• /
• pp.713-725
• /
• 2004

The two-dimensional motion of a freely falling circular cylinder in an infinite fluid is investigated numerically using combined formulation. The effect of vortex shedding on the motion of a freely falling cylinder is clearly seen: as the streamwise velocity of the cylinder increases due to gravity, the periodic vortex shedding induces a periodic motion of the cylinder. This motion in turn affects the flow field, which is manifested by the generation of the angular velocity vector of the cylinder parallel to the cross product of the gravitational acceleration vector and the transverse velocity vector of the cylinder. A correlation of St-Re relationship for a freely falling circular cylinder is drawn from the present results. The Strouhal number for a freely falling circular cylinder is found to be smaller than that for a fixed circular cylinder when the two Reynolds numbers based on the streamwise terminal velocity of a freely failing circular cylinder and the free stream velocity of a fixed one are the same. From "thought experiments", it is shown that the transverse motion of the cylinder plays a crucial role in reducing the Strouhal number and has an effect of reducing the Reynolds number from the viewpoint of the pressure coefficient. The mechanism of this reduction in the Strouhal number is revealed by the fact that the freely falling cylinder experiences a smaller lift force than the fixed one due to the transverse motion resulting in the retardation of the vortex shedding.

• 약학회지
• /
• 제43권2호
• /
• pp.237-250
• /
• 1999

In order to investigate the pharmacologic properties of New Wonbang Woohwangchungsimwon Pill(NSCH), effects of Wonbang Woohwangchungsimwon Pill (SCH) and NSCH were compared using various experimental models. In rat aorta, NSCH and SCH made the relaxation of blood vessels in maximum contractile response to phenylephrine (10-6 M) regardless to endothelium containing or denuded rings of the rat aorta. Furthermore, the presence of the inhibitors of NO synthase and guanylate cyclase did not affect significantly the relaxing effects of NSCH and SCH. NSCH and SCH inhibited the vascular contractions induced by acetylcholine, prostaglandin endoperoxide or peroxide in a dose-dependent manner. In conscious spontaneously hypertensive rats (SHRs), NSCH and SCH decreased significantly heart rate. These, at high doses, had a negative inotropic effects that was a decrease of left ventricular developed pressure and (-dp/dt)/(+dp/dt) in the isolated perfused rat hearts, and also decreased the contractile force and heart rate in the isolated rat right atria. In guinea-pig papillary muscle, these had no effects on parameters of action potential such as action potential amplitude (APA), $V_{max}$ and resting membrane potential (RMP) at low doses, whereas inhibitory the cardiac contractility at high doses. Furthermore, these had a significant inhibitory effects on palpitation of the heart in normotensive rats and SHRs. These had a significant inhibitory effects on palpitation of the heart in normotensive rats and SHRs. These results suggest that NSCH and SCH have weak cardiovascular effects, and that there is no significant differences between cardiovascular effects of two preparations.

• 한국해양공학회지
• /
• 제17권5호
• /
• pp.66-75
• /
• 2003

Long cylinder, subjected to internal pressure, is important in the analysis and design of nuclear fuel rod structures. In many cases, long cylinder problems have been considered as a plane strain condition. However, strictly speaking, long cylinder problems are not plane strain problems, but rather a general plane strain (GPS) condition, which is a combination of a plane strain state and a uniform strain state. The magnitude of the uniform axial strain is required, in order to make the summation of the axial force zero. Although there has been the GPS element, this paper proposes a general technique to solve long cylinder problems, using several pseudo-general plane strain (PGPS) elements. The conventional GPS elements and PGPS elements employed are as follows: axisymmetric GPS element (GA3), axisymmetric PGPS element (PGA8/6), 2-D GPS element (GIO), 3-D PGPS element (PG20/16), and reduced PGPS elements (RPGA6, RPG20/16). In particular, PGPS elements (PGA8/6, PG20/16) can be applied in periodic structure problems. These finite elements are tested, using several kinds of examples, thereby confirming the validity of the proposed finite element models.

• 대한치과보철학회지
• /
• 제56권4호
• /
• pp.295-301
• /
• 2018

치조제 흡수 및 광범위한 flabby tissue가 존재하는 Class III 무치악 증례에서 의치의 유지, 지지, 안정을 얻기는 매우 어렵다. 환자는 72세의 남성으로 약 20년전 비의료기관에서 제작된 의치의 잦은 탈락과 잘 씹히지 않는다는 것을 주소로 내원하신 분이다. 본 환자의 임상검사 소견상 상악 전치부에는 심한 flabby tissue 가 존재하였으며, 골격성 Class III에 해당하는 심한 하악 전돌 양상이 관찰되었다. 먼저 임시 의치 제작으로 저작기능을 회복하고 flabby tissue의 무압인상채득을 실시하였으며, 구치부 치아 배열을 고려하여 최종 의치를 제작하였다. 이에 환자의 주소인 의치의 탈락 및 저작시 불편감이 개선되는 양호한 결과를 얻었기에 이를 보고하는 바이다.

• KSBB Journal
• /
• 제10권1호
• /
• pp.105-112
• /
• 1995

본 연구에서는 LB기법에 의하여 분자수준으로 고 정화된 효소를 이용하여 에탄올의 양을 측정하는 광섬유 바이오센서가 개발되 었다. ADH는 arachidic acid의 단분자막에 LB기법으로 고정화된다. 센서의 출력신호를 분석하기 위하여 고정화된 ADH의 효소 반응은 ordered multisubstrate mechanism을 이용 하여 검토되었다. 광학 측정 시스템이 제시되었으며, 센서의 출력신호는 에단올의 농도에 비례하여 증가 하며 LB막에 누적된 누적충수와 관련이 있음을 알 수 있었다. LB막의 누적된 누적충수를 20충으로 증가하면 센서의 신호출력 범위가 확장되어 45mM의 고농도 에탄올도 측정할 수 있었다. 순수지질의 단 분자막과 효소가 흡착된 지질의 단분자막의 $\pi$-Aisotherm은 중성의 subphase에서 각기 다른 전하를 띠는 세 가지 종류의 지질에 대하여 조사되었다. ADH의 흡착도가 가장 우수한 지질은 arachidic a acid이며 이는 중성의 sub phase에서 양의 전하를 띠는 ADH 분자와 읍극의 전하를 띠는 arachidic a acid 분자 사이에 작용하는 정전기력에 기인한 것이다.

• 대한토목학회논문집
• /
• 제8권1호
• /
• pp.33-40
• /
• 1988

흙과 보강재 사이의 거동을 측정하는 수단으로서 hollow cylinder type의 샘플 내에 보강재를 인장방향으로 삽입하여 주위압력을 일정하게 유지한 가운데 축력(軸力)을 감소시키는 소위 삼축인장시험을 실시하였다. 인장특성(引張特性)(extensibility)이 상이(相異)한 3종류의 보강재를 사용한 결과 파괴변형율(failure strain), 최대강도후의 응력강소(loss of post-peak strength), 변형모양(deformation mode) 등이 보강재에 따라 각각 독특하였고, 파괴의 양상은 breakage 또는 pull-out 이 발생하였으며, 보강재단(補强材端)의 고정여부에 따라 보강효과가 영향을 받음이 확인되었다. 따라서 보강토해석 및 설계시 흙 및 보강재 자체의 강도(强度)와 더불어 보강재의 인장특성(引張特性)과 경계조건(境界條件)이 매우 중요한 고려요소임을 알 수 있었다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 춘계학술발표대회 논문집
• /
• pp.51-54
• /
• 2005

Shape memory alloys (SMAs) find many applications in smart composite structural systems as the active components. Their ability to provide a high force and large displacement makes them an excellent candidate for an actuator for controlling the shape of smart structures. In this paper, using a macroscopic model that captures the thermo-mechanical behaviors and the two-way shape memory effect (TWSME) of SMAs smart morphing polymeric composite shell structures like shape-changeable UAV wings is demonstrated and analyzed numerically and experimentally when subjected to various kinds of pressure loads. The controllable shapes of the morphing shells to that thin SMA strip actuator are attached are investigated depending on various phase transformation temperatures. SMA strips start to transform from the martensitic into the austenitic state upon actuation through resistive heating, simultaneously recover the prestrain, and thus cause the shell structures to deform three dimensionally. The behaviors of composite shells attached with SMA strip actuators are analyzed using the finite element methods and 3-D constitutive equations of SMAs. Several morphing composite shell structures are fabricated and their experimental shape changes depending on temperatures are compared to the numerical results. That two results show good correlations indicates the finite element analysis and 3-D constitutive equations are accurate enough to utilize them for the design of smart composite shell structures for various applications.

• Journal of Mechanical Science and Technology
• /
• 제18권8호
• /
• pp.1435-1450
• /
• 2004

Experimental data are presented which describe the effects of a combustor-level high free-stream turbulence on the near-wall flow structure and heat/mass transfer on the endwall of a linear high-turning turbine rotor cascade. The end wall flow structure is visualized by employing the partial- and total-coverage oil-film technique, and heat/mass transfer rate is measured by the naphthalene sublimation method. A turbulence generator is designed to provide a highly-turbulent flow which has free-stream turbulence intensity and integral length scale of 14.7% and 80mm, respectively, at the cascade entrance. The surface flow visualizations show that the high free-stream turbulence has little effect on the attachment line, but alters the separation line noticeably. Under high free-stream turbulence, the incoming near-wall flow upstream of the adjacent separation lines collides more obliquely with the suction surface. A weaker lift-up force arising from this more oblique collision results in the narrower suction-side corner vortex area in the high turbulence case. The high free-stream turbulence enhances the heat/mass transfer in the central area of the turbine passage, but only a slight augmentation is found in the end wall regions adjacent to the leading and trailing edges. Therefore, the high free-stream turbulence makes the end wall heat load more uniform. It is also observed that the heat/mass transfers along the locus of the pressure-side leg of the leading-edge horseshoe vortex and along the suction-side corner are influenced most strongly by the high free-stream turbulence. In this study, the end wall surface is classified into seven different regions based on the local heat/mass transfer distribution, and the effects of the high free-stream turbulence on the local heat/mass transfer in each region are discussed in detail.

• 대한기계학회논문집B
• /
• 제41권11호
• /
• pp.709-717
• /
• 2017

연구는 직렬 2단 Weis-Fogh형 수차모델을 제안하고, 이 수차모델의 유체역학적 특성을 개선 와법으로 수치계산한 것이다. 기본조건 및 각 날개의 움직임은 이전에 저자가 제안한 단단 수차모델에서와 같게 했다. 두 날개(NACA0010 airfoils) 및 양쪽 수로벽은 소스 및 볼텍스 판넬로 근사하였고, 자유볼텍스는 각 물체 표면 전체에서 도입하였다. 계산변수로는 앞날개와 뒷날개의 날개 축 사이의 거리 및 두 날개 운동의 위상차 즉 동위상과 역위상으로 했다. 각 경우에 대해 비정상 유동장 및 압력장 그리고 두 날개에 작용하는 힘의 계수 및 효율을 계산하였고, 이 수차모델의 유체역학적 특성을 논의하였다.