• Journal of the Korean Home Economics Association
• /
• v.36 no.6
• /
• pp.85-94
• /
• 1998

In this study we tested the physiological influence on human-body according to clothing pressure with reduction rate and varied posture using three kinds of belt with different width. The width of belts were 2.5cm, 3.5cm and 4.5cm, and reduction rates of belts were 0%, 2.5% and 5% of the subject/s waist size respectively. the measured postures were standing state and sitting stste in the chair. The reasults are as follows; 1. Clothing pressure was high in the order of Side part>Front part>Back part and the rate fo change in the side part was highest, according to the reductio rate of belts. The more the width of belt was wide, the less the clothing pressure was small, and this kind of phenomenon could be explained by "The Principle of the power". 2. Both the rate of reduction of belt and the change of average skin temperature in accordance with the width of belt is small, however, the more the width of belts is wider and the reduction rate is bigger, the more the skin temperature at the waist part is increased. 3. The blood pressure and pulse was influenced when the width of belt was narrow and the reduction rate was high. 4. A sense restraining was much influenced by the width of belt, especially when the width of belts was wide, the significant difference was permitted.permitted.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.10 no.3
• /
• pp.201-208
• /
• 2002

In this paper, the control strategy of ratio changing system for a metal belt CVT adopting primary pressure regulation is developed, and the shirting performance of pressure regulating type CVT with the suggested control strategy is investigated. The control strategy suggested in this study is composed of 2 feedback loop, one is speed ratio feedback and the other is primary pressure feedback. The pressure feedback is adopted to ensure prohibiting a belt slip during transient period in a fast downshift mode. Simulation results show that the system with suggested control strategy gives appropriate response time and tracking Performance for upshift and also gives a proper primary pressure which can prohibit the belt slip. In addition, it is fecund that the given system has an acceptable servo property in tracking the target speed ratio and robustness for the disturbance of line pressure.

• Journal of Mechanical Science and Technology
• /
• v.14 no.6
• /
• pp.645-654
• /
• 2000

In this paper, low level control algorithms of a metal belt CVT are suggested. A feedforward PID control algorithm is adopted for line pressure based on a steady state relationship between the input duty and the line pressure. Experimental results show that feedforward PID control of the line pressure guarantees a fast response while reducing the pressure undershoot which may result in belt slip. For ratio control, a fuzzy logic is suggested by considering the CVT shift dynamics and on-off characteristics of the ratio control valve. It is found from experimental results that a desired speed ratio can be achieved at steady state in spite of the fluctuating primary pressure. It is expected that the low level control algorithms for the line pressure and speed ratio suggested in this study can be implemented in a prototype CVT.

• Industrial Engineering and Management Systems
• /
• v.7 no.1
• /
• pp.90-98
• /
• 2008

This research selects the lifting task to be the main subject. Four experiments were designed to measure which among lifting postures, lifting heights, waist-belt, and breathing control significantly influences intra-abdominal pressure (Gallagher, 1991; Lavender, Andersson and Natarajan, 1999). The experimental results were taken to be the recommendations of the manual materials handling work design. The research findings reveal that the symmetrical stoop posture is the most significant to the intra-abdominal pressure within all lifting postures. When the lifting height is increased, the intra-abdominal pressure produced relatively goes up. Also, the combination of symmetrical stoop posture, waist-belt use, and inspiration and holding at the same time is the most efficient in carrying out lifting tasks. Simultaneously, the research discovers that for any posture, the volume of the intra-abdominal pressure is much bigger when using the waist-belt compared to when it is not used. Therefore, the waist-belt design for the lifting works might be the future research approach.

• Journal of Convergence for Information Technology
• /
• v.10 no.2
• /
• pp.176-183
• /
• 2020

The purpose of this study was to determine whether abdominal pressure belt has an immediate effect on pulmonary function, balance and gait ability for stroke patients. Twenty subjects measured pulmonary function and the COP, BBS, TUG, 10m walk test, and FGA prior to belt wearing. Immediately all subjects were post-tested after wearing abdominal pressure belt of elastic components. Except for forced vital capacity (FVC) and forced experimental volume in the 1 second (FEV1), there were significant differences after belt wearing. This study suggests that the application of abdominal pressure belt enhanced balance and gait ability. However, improving pulmonary function requires several efforts, such as changing the pressure level, posture.

• Textile Coloration and Finishing
• /
• v.17 no.5 s.84
• /
• pp.53-60
• /
• 2005

Fusing press m/c is used for heating and pressing the specimens that are fed into between the two moving belts. Therefore the belt movement, belt temperature, and the pressure between belts must be kept constant. Especially, the belts should move in a limited operation range. When the belts run far out of the operation point, the machine has to be stopped, which results in a product defect because the fusing conditions, e.g., temperature and pressure, change during the transient process time period. It is important to avoid the belt stopping by maintaining the belt movement in a limited range. This study reports about the movement of the endless fusing belt in a long-span roller fusing m/c. The belt position changes as the 1st-order system does; if the roller axes are slanting each other with a certain angle, the belt running around the two rolls shows a dynamic behavior with the time that deviates fastly at the beginning from the initial condion and slows down. Then it reaches at a final position. The skewer the axes, the greater the position change. The inital change rate of the belt becomes large as the skewness of the axes between the two rollers increases.

• Journal of Fisheries and Marine Sciences Education
• /
• v.28 no.4
• /
• pp.893-902
• /
• 2016

The purpose of this study is to investigate the effect of wearing a weightlifting belt, which is an auxiliary equipment used during squat, by measuring and analyzing biomechanical difference in lower limb and proposing safer and to suggest a more effective exercise method for general population. Selected 8 male participants in their 20s who have not performed regular resistance exercise for at least a year, but have experience of performing squat. The comprehensive method of study is as follows: subjects were notified of the purpose of the study and were told to practice warm-up and the squat motion for the experiment for 20 minutes. When the participant believed they were ready to begin, the experiment was started. At controlled points, foot pressure distribution sensor has been installed. Then left and right feet have been placed on the pressure distribution sensor, from which data for successful squat position that does not satisfy the criteria for failure have been collected and computed with Kwon3D XP program and TPScan program. For data processing of this study, SPSS 21.0 was used to calculated mean (M) and standard deviation (SD) of the analyzed values, and paired t-test has been conducted to investigate the difference before and after wearing the weightlifting belt, with p-value of ${\alpha}<.05$. As for time consumed depending on usage of weightlifting belt in squat, statistically significant difference has been found in P2, which is recovery movement. Lower limb angle depending on usage of weightlifting belt in squat has shown statistically significant difference in E1 foot joint(p<. 001). There has been statistically significant difference in E2 knee joint. Foot pressure percentage depending on usage of weightlifting belt in squat were found to be statistically significant (p<. 01) in both regions of anterior and posterior foot.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.27 no.3
• /
• pp.25-36
• /
• 2021

Background: This study aimed to investigate the effect of modified constraint-induced movement therapy (mCIMT) and resistive exercise using elastic band with pressure belt on improving upper extremity function in stroke patients. Methods: Sixteen patients with stroke were randomly assigned to a control group that received mCIMT and resistive exercise using elastic band (n=8) and an experimental group that received mCIMT and resistive exercise using elastic band with pressure belt (n=8). Over the course of four weeks, mCIMT were conducted 60 minute three times per week and resistive exercise using elastic band (with pressure belt) were conducted twice daily, three times per week. The function of the upper extremities were evaluated before, after 2 weeks and 4 weeks using the grip strength test (GST), the box and block test (BBT), and motor activity log (MAL). Results: The values for the GST, the BBT, and MAL increased in both groups as the treatment period progressed. The values for the GST (p<.01), the BBT (p<.001), and MAL (p<.001) were significantly higher in the experimental group than in the control group at 4 weeks after initiating the treatment. Conclusion: We found that mCIMT and wearing a pressure belt during resistive exercise was very useful in improving the function of the upper extremities in patients with stroke.

• Journal of the Korean Society of Physical Medicine
• /
• v.14 no.3
• /
• pp.47-53
• /
• 2019

PURPOSE: This study measured the external pressure on abdomen during maximal inspiration. The study determined the correlation between the diaphragmatic contraction pressure and the lung capacities to verify whether or not the measured pressure values can represent diaphragmatic contractility. METHODS: The study included 32 healthy subjects (16 males and 16 females). The researchers fabricated their own diaphragmatic pressure belt (DiP Belt) to measure DCP. DiP Belt device was fixed on the front of the abdomen and the diaphragmatic contractility was measured during maximal inspiration. The lung capacities were measured using a portable digital spirometer device (Pony Fx, COSMED, Italy). A digital spirometer is a device that is used to test the flow of air entering and exiting the lungs. RESULTS: DCP showed significant positive correlations with vital capacity (VC), inspiratory reserve volume (IRV) and inspiratory capacity (IC). Among values of lung capacities, IC showed especially strong positive correlations with the DCP (r =.714, p<.010). For the males, DCP showed significant positive correlations with IRV and IC, and DCP showed significant negative correlation with the expiratory reserve volume (ERV). For the females, DCP showed significant positive correlation with tidal volume (VT), but any significant correlation was not found with any of the other values of lung capacities. CONCLUSION: DCP showed high correlations with IRV and IC associated with inspiratory capacity. Therefore, The DiP Belt can be looked upon as a simple device that is very useful for measuring diaphragmatic contractility.

• Journal of the Ergonomics Society of Korea
• /
• v.31 no.2
• /
• pp.337-343
• /
• 2012

Objective: The aim of this study was to determine the effect of abdominal-compression belt in one leg standing on balance in normal adult. Background: With the effects of increased intra-abdominal pressure, the abdominal-compression belt is contributing to a static balance control. However, specific study is still insufficient. Method: Forty subjects were randomly allocated to two groups: control(n=20) and experimental group(n=20), respectively. The experimental group used an abdominal-compression belt, whereas the control group did not that. All subjects were educated using pressure biofeedback unit and ultrasound imaging for exact application by abdominal-compression belt. Main outcome measurement was used a general stability index, fourier harmony index, weight distribution index, and fall index in tetrax balance system. Results: Experimental group improved significantly on general stability, only 2 factors(eyes closed with head turned forward and eyes closed with head turned backward) among fourier harmony index, and fall index, However, weight distribution index did not revealed significant difference. Conclusion: The findings suggest that application of abdominal-compression belt could be effective on improving balance ability in one leg standing of normal adults. Application: The results of the abdominal-compression belt might help to control balance in workers.