• Journal of Korean Medical Science
• /
• v.33 no.50
• /
• pp.299.1-299.13
• /
• 2018

Background: Sarcopenia is associated with a poor prognosis in patients with liver cirrhosis. However, it is not known whether the rate of skeletal muscle depletion is also associated with a poor prognosis. We investigated the prognostic impact of the rate of skeletal muscle depletion in patients with liver cirrhosis. Methods: We included retrospectively all patients with liver cirrhosis who underwent both multiple computed tomography scans and hepatic venous pressure gradient (HVPG) measurements. Results: A total of 131 patients with liver cirrhosis were enrolled. The mean age of the patients was 53.7 years and alcoholic liver disease was the most common cause (61.8%). Sixty-four patients (48.9%) were diagnosed with sarcopenia. The median changes in skeletal muscle area per year (${\Delta}SMA/y$) were -0.89%. During a median follow-up period of 46.2 months (range, 3.4-87.6), 45 patients (34.4%) died. In multivariate analyses, age, Child-Pugh score, HVPG, presence of sarcopenia and ${\Delta}SMA/y$ were independently associated with mortality. Cumulative mortality was significantly higher in patients with ${\Delta}SMA/y$ < -2.4% than those with ${\Delta}SMA/y{\geq}-2.4%$ (log-rank test, P < 0.001). Conclusion: Both the presence and rate of change of sarcopenia are independently associated with long-term mortality in patients with liver cirrhosis.

• Korean Journal of Metals and Materials
• /
• v.49 no.11
• /
• pp.845-852
• /
• 2011

The Spark Plasma Sintering(SPS) method offers a means of fabricating a sintered-body having high density without grain growth through short sintering time and a one-step process. A titanium compact having high density and purity was fabricated by the SPS process. It can be used to fabricate a Ti sputtering target with controlled parameters such as sintering temperature, heating rate, and pressure to establish the optimized processing conditions. The compact/target(?) has a diameter of ${\Phi}150{\times}6.35mm$. The density, purity, phase transformation, and microstructure of the Ti compact were analyzed by Archimedes, ICP, XRD and FE-SEM. A Ti thin-film fabricated on a $Si/SiO_2$ substrate by a sputtering device (SRN-100) was analyzed by XRD, TEM, and SIMS. Density and grain size were up to 99% and below $40{\mu}m$, respectively. The specific resistivity of the optimized Ti target was $8.63{\times}10^{-6}{\Omega}{\cdot}cm$.

• Journal of the Society of Naval Architects of Korea
• /
• v.32 no.4
• /
• pp.38-47
• /
• 1995

The three-dimensional multi-layer computer simulation technology for tidal current developed in the previous study is updated to a new version. many improvements are achieved by following changes : (1) No-reflection condition is adopted instead of no-gradient condition as an open boundary condition. (2) Time marching algorithm is changed so that velocity and pressure(surface movement) might be salved in turn at different time step (3) Convection term in equation of motion is estimated by upwind differencing scheme instead of central differencing. The stability is improved considerably and the steady state is achieved within 2 tidal periods which is about 3 times shorter than that of the old version. Moreover, fluctuations in time disappeared by introducing the new time marching technique. An application to the real near shore area(near Inchon harbor) is performed by the new version. Simulated results are compared with those by the simulation total developed in the University of Tokyo. Validity and effectiveness of the two simulation technologies are chocked through the comparative research works.

• Proceedings of the SAREK Conference
• /
• 2006.06a
• /
• pp.68-73
• /
• 2006

The present paper deals with an experimental study of boiling heat transfer characteristics of R-290, and is focused on pressure gradient and heat transfer coefficient of the refrigerant flow inside horizontal smooth minichannel with inner diameter of 3.0 mm and length of 2000 mm. The direct heating method applied for supplying heat to the refrigerant where the test tube was uniformly heated by electric current which was applied to the tube wall. The experiments were conducted with R-290 with purity of 99.99% at saturation temperature of 0 to $10^{\circ}C$. The range of mass flux is $50{\sim}250kg/m^2s$ and heat flux is $5{\sim}20kW/m^2$. The heat transfer coefficients of R-290 increases with increasing mass flux and saturation temperature, wherein the effect of mass flux is higher than that of the saturation temperature, whereas the heat flux has a low effect on increasing heat transfer coefficient. The significant effect of mass flux on heat transfer coefficient is shown at high quality, the effect of heat flux on heat transfer coefficient at low quality shows a domination of nucleate boiling contribution. The heat transfer coefficient of the experimental result was compared with six existing heat transfer coefficient correlation. Zang et al.'s correlation(2004) gave the best prediction of heat transfer coefficient.

• Ocean Systems Engineering
• /
• v.8 no.4
• /
• pp.381-407
• /
• 2018

This paper presents a hybrid numerical approach, which combines a two-phase Navier-Stokes model (NS) and the fully nonlinear potential theory (FNPT), for modelling wave-structure interaction. The former governs the computational domain near the structure, where the viscous and turbulent effects are significant, and is solved by OpenFOAM/InterDyMFoam which utilising the finite volume method (FVM) with a Volume of Fluid (VOF) for the phase identification. The latter covers the rest of the domain, where the fluid may be considered as incompressible, inviscid and irrotational, and solved by using the Quasi Arbitrary Lagrangian-Eulerian finite element method (QALE-FEM). These two models are weakly coupled using a zonal (spatially hierarchical) approach. Considering the inconsistence of the solutions at the boundaries between two different sub-domains governed by two fundamentally different models, a relaxation (transitional) zone is introduced, where the velocity, pressure and surface elevations are taken as the weighted summation of the solutions by two models. In order to tackle the challenges associated and maximise the computational efficiency, further developments of the QALE-FEM have been made. These include the derivation of an arbitrary Lagrangian-Eulerian FNPT and application of a robust gradient calculation scheme for estimating the velocity. The present hybrid model is applied to the numerical simulation of a fixed horizontal cylinder subjected to a unidirectional wave with or without following current. The convergence property, the optimisation of the relaxation zone, the accuracy and the computational efficiency are discussed. Although the idea of the weakly coupling using the zonal approach is not new, the present hybrid model is the first one to couple the QALE-FEM with OpenFOAM solver and/or to be applied to numerical simulate the wave-structure interaction with presence of current.

• Journal of the Society of Naval Architects of Korea
• /
• v.58 no.4
• /
• pp.243-252
• /
• 2021

The present study aims to investigate the interaction of a wire-type turbulence stimulator and the laminar boundary layer on a flat plate by flow field measurement. For the towing tank tests, a one-dimensional Laser Doppler Velocimetry (LDV) attached on a two-axis traverse was used to measure the streamwise velocity component of the boundary layer flow in zero pressure gradient, disturbed by a turbulence stimulator. The wire diameter was 0.5 and 1.0 mm according to the recommended procedures and guidelines suggested by the International Towing Tank Conference. Turbulence development by the stimulator was identified by the skin friction coefficient, mean and Root Mean Square (RMS) of the streamwise velocity. The laminar boundary layer with the absence of the wire-type stimulator was similar to the Blasius solution and previous experimental results. By the stimulator, the mean and RMS of the streamwise velocity were increased near the wall, showing typical features of the fully developed turbulent boundary layer. The critical Reynolds number was reduced from 2.7×10⁵ to 1.0×10⁵ by the disturbances caused by the wire. As the wire diameter and the roughness Reynolds number (Rek) increased, the disturbances by the stimulator increased RMS of the streamwise velocity than turbulent boundary layer.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.53-53
• /
• 2015

Basin-scale motions in a stratified lake rely on interactions of spatially and temporally varying wind force, bathymetry, density variation, and earth's rotation. These motions provide a major driving force for vertical and horizontal mixing of inorganic and organic materials, dissolved oxygen, storm water and floating debris in stratified lakes. In Lake Tahoe, located between California and Nevada, USA, basin-scale circulations are obviously important because they are directly associated with the fate of the suspended particulate materials that degrade the clarity of the lake. A three-dimensional hydrodynamic model, ELCOM, was applied to Lake Tahoe to investigate the underlying mechanisms that determine the characteristics of basin-scale circulations. Numerical experiments were designed to examine the relative effects of various mechanisms responsible for the horizontal circulations for two different seasons, summer and winter. The unique double gyre, a cyclonic northern gyre and an anti-cyclonic southern gyre, occurred during the winter cooling season when wind stress curl, stratification, and Coriolis effect were all incorporated. The horizontal structure of the upwelling and downwelling formed due to basin-scale internal waves found to be closely related to the rotating direction of each gyre. In the summer, the spatially varying wind field and the Coriolis effect caused a dominant anti-cyclonic gyre to develop in the center of the lake. In the winter, a significant wind event excited internal waves, and a persistent (2 week long) cyclonic gyre formed near the upwelling zone. Mechanism of the persistent cyclonic gyre is explained as a geostrophic circulation ensued by balancing of the baroclinc pressure gradient (or baroclinic instability) and Coriolis effect. Topographic effect, examined by simulating a flat bathymetry with constant depth of 300m, was found to be significant during the winter cooling season but not as significant as the wind curl and baroclinic effects.

• Journal of Veterinary Clinics
• /
• v.37 no.6
• /
• pp.311-316
• /
• 2020

Biomarkers used in dogs with heartworm disease include N-terminal pro B-type natriuretic peptide (NT-proBNP) and cardiac troponin I (cTnI), which are associated with damage to the myocardium. Pulmonary hypertension is one of the clinical signs of canine heartworm disease. The purpose of this study is to investigate the change in the concentration of each biomarker, severity of pulmonary hypertension and the correlation between biomarkers according to the severity of clinical signs. Five healthy dogs and 10 heartworm-infected dogs were recruited for the study. The heartworm-infected group was classified based on the history, clinical signs, and blood assay, thoracic radiography, and echocardiography after confirming the infection according to the results of the commercial ELISA kit (SNAP test, IDEXX Laboratories, Maine, USA). NT-proBNP was higher in the severely infected group than the control group (p < 0.05); cTnI was also higher in the severely infected group than the control group (p < 0.05). The pressure gradient of pulmonary hypertension was higher in the severe group than the mild group (p < 0.05). The severity of pulmonary hypertension was correlated with NT-proBNP (r = 0.818, p < 0.01), cTnI (r = 0.894, p < 0.01). When the correlation of the two serum values for each group was examined, a correlation was not found in the mild group (r = 0.707, p = 0.182), but a correlation was found in the severe group (r = 0.9, p < 0.05). NT-proBNP and cTnI were significantly increased and correlated with severe clinical signs. Pulmonary hypertension was significant higher in the severe group than in the mild group (p < 0.05). Evaluation of blood biomarker concentration and severity of pulmonary hypertension and referring to each correlation between these indicators may be helpful to assess the severity of the heartworm disease.

• Journal of Korean Medicine for Obesity Research
• /
• v.20 no.2
• /
• pp.97-108
• /
• 2020

Objectives: Ephedra sinica and Wolbigachul-tang which contains Ephedra sinica are used to treat obesity in Korean medicine. The aim of this study was to analyze the quantities of ephedrine alkaloids by high-performance liquid chromatography. Methods: The analysis was performed using a YMC-Triat C18 column with operating at 25℃, and UV detection at 210 nm. The mobile phase used a gradient flow with 0.1% H3PO4 in water and acetonitrile. Specificity, linearity, precision, accuracy, limit of detection, and limit of quantification were measured for validation anaylsis. This method was applied to analyze the quantities of ephedrine alkaloids in Ephedra sinica and Wolbigachul-tang. Results: The concentration per Ephedra sinica (gram) of ephedrine and pseudoephedrine in Ephedra sinica decoction are 4.74±0.22 mg and 2.19±0.10 mg, respectively and in Wolbigachul-tang decoction are 6.39±0.34 mg and 2.97±0.21 mg, respectively. The retention time of ephedrine was 23.6 min and that of pseudoephedrine was 25.8 min, and norephedrine and methylephedrine were not detected. Conclusions: In conclusion, analyzed the concentration of ephedrine alkaloids in Ephedra sinica and Wolbigachul-tang by the developed validation method.

• Korean Journal of Metals and Materials
• /
• v.47 no.6
• /
• pp.372-377
• /
• 2009

We report on hysteresis behavior in the electrical resistance-hydrogen concentration of Pd thin films. The variation of the electrical resistance has been investigated during the process of absorption and desorption of hydrogen gas ($H_{2}$) as a function of thickness of Pd thin films. The hysteresis behavior in the electrical resistance with $H_{2}$ concentration was found for Pd thin films and consists of $\alpha$ phase, ${\alpha}+{\beta}$ phase, and $\beta$ phase regions. The sensitivity of Pd thin films with $H_{2}$ concentration was found to follow Sieverts' law in the $\alpha$ phase region. However, the sensitivity was observed to increase abruptly with $H_{2}$ concentration in the ${\alpha}+{\beta}$ phase co-exist region. This is because Pd-H interaction is stronger in the $\beta$ phase than in the $\alpha$ phase and needs a higher concentration gradient as a driving force to desorb. The formation of the $\beta$ phase also was observed to cause the structural change because of the lattice expansion during absorption. The hysteresis height and the trace of structural change were affected by the thickness of the Pd film. As the film becomes thinner, the hysteresis height becomes lower and the amount of delamination on the surface becomes smaller. For films thinner than 20 nm in thickness, the delamination was not found but electrical resistance hysteresis was still observed.