• Journal of Plant Biotechnology
• /
• v.5 no.4
• /
• pp.225-231
• /
• 2003

The hormonal requirement suiting micropropagation of Morus alba during any season throughout the year was studied. Sprouting frequency from axillary buds of M. alba was greatly influenced by the time of explant collection, the highest value was achieved when nodal explants were collected at the end of bud dormancy period (late in March) and cultured on Murashige and Skoog (MS) medium supplemented with low concentration (0.5 mg/L) of BAP, kinetin or IBA (85-68%). In addition, they showed higher axillary bud sprouting on growth-regulators-free medium (49%) than others collected in autumn or winter and cultured on medium supplemented with various growth regulators (47-48%). Regardless of that period, young explants with greenish buds collected in summer exhibiting high sprouting frequency (66%) on MS medium supplemented with 0.5 mg/L kinetin and 0.5 mg/L GA3. Shoot multiplication via adventitious bud formation was achieved when the nodal explants were cultured on MS medium supplemented with 2 mg/L BAP and 0.2 mg/L IBA. Further multiplication via nodal explants of in vitro grown shoots was obtained on MS medium supplemented with 0.5 mglL BAP and 0.5 mg/L GA3. While half strength MS medium supplemented with low concentration (0.5 mg/L) of IBA, IAA or 2,4-D stimulated adventitious root formation, IBA was the best. After transfer the plantlets to the soil, acclimatization for three weeks was essential prerequisite for survival in high frequency (92%). Peroxidase activity is related to break of bud dormancy where maximum enzyme activity was detected when the lateral buds were induced to commence growth under field condition (early in spring) or in vitro.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.2
• /
• pp.147-152
• /
• 2014

In this research, polysulfone hollow fiber membrane was used to recover $CO_2$ which is one of greenhouse gases from flue gas stream being emitted after the combustion of fossil fuels. The prerequisite requirement is to design the membrane process producing high-purity $CO_2$ from flue gas. For separation of $CO_2$, a membrane module and flue gas containing 10% carbon dioxide was used. The effects of operating conditions such as pressure, temperature, feed gas composition and multi-stage membrane on separation performance were examined at various stage cuts. Higher operating pressure and temperature increased carbon dioxide concentration and recovery ratio in permeate. Recovery ratio and separation efficiency increased if a higher content of $CO_2$ injection gas composition. Three-stage membrane system was producing a 95% $CO_2$ with 90% recovery from flue gas. The separation efficiency of three-stage membrane system was higher than one-stage system.

• The Journal of the Korea Contents Association
• /
• v.22 no.10
• /
• pp.404-413
• /
• 2022

As non-face-to-face classes have been adopted as an essential class method in universities after COVID-19, interest in ways to encourage student engagement is increasing. Class engagement is a prerequisite for improving the quality of education, so it is inevitably an even more important requirement in non-face-to-face classes. Therefore, this study examined the efforts and concerns based on the teaching experiences of three professors of D University, which have been operated by mixing non-face-to-face or non-face-to-face classes since 2020. As a result, both professors and students went through trial and error in the early stages of non-face-to-face classes, but over time, it was confirmed that students not only actively expressed their opinions but also voluntarily expanded the class activity. This study is meaningful in that it found the possibility that professors-led classes can develop into learner-participating classes through appropriate harmony between face-to-face and non-face-to-face and the use of various media. Data were collected through an autobiographical method.

• Membrane Journal
• /
• v.15 no.4
• /
• pp.310-319
• /
• 2005

This paper describes the preliminary study on the development of multi-stage membrane demonstration plant for removal of carbon dioxide from flue gas stream being emitted from LNG boiler in thermal power generation plant. The prerequisite requirement is to design and develop the membrane process producing a $99\%\;CO_2$ with $90\%$ recovery from LNG flue gas of 1,000 $Nm^3$/day. Asymmetric polyethersulfone hollow fiber membranes and membrane modules developed in this laboratory[1] were used in this study. Using the permeation data for the hollow fiber membranes, modelling on the membrane module and multi-stage membrane process was done to meet the requirement condition of the process design. The effects of the operating pressure of feed and permeate side and feed concentration on $CO_2$ purity and recovery were investigated experimentally with the developed hollow fiber modules. These experimental results matched well with theoretical modelling results.

• Korean Journal of Construction Engineering and Management
• /
• v.21 no.4
• /
• pp.21-29
• /
• 2020

This study analyzed problems of operating performance bond for public works and derived some suggestions for improvement. The Contract Law for Government Owner requires to submit performance bond which guarantees performing the construction contractor pays back compensation money when the obligation is not executed. Currently, first bid eligibility for participation is exactly required for executing company of performance bond obligation, not considering volume, technical level, and special type of remaining works. In collaboration contract, if guarantee accident occurs, it is obliged for remaining collaboration contractors to be qualified to fulfill the whole contract. This study proposes following improvement plan to solve problems of current performance bone in public works. Firstly, qualification criteria must be deregulated exceptionally for selecting proper contractor, which executing performance bond obligation, considering progress and characteristics of remaining works. Secondly, In collaboration contract, the prerequisite of remaining contractors' should be deregulated as 'implementation requirement of the remaining works'from'implementation requirement of the whole work'. Finally, defect responsibility should be included in liabilities of performance bond by specifying that owner or guarantee agency bear them.

• Korean Journal of Soil Science and Fertilizer
• /
• v.31 no.3
• /
• pp.266-270
• /
• 1998

The identification of soil P level that exceed crop requirement is a prerequisite in implementing sustainable management of fertilizer and manure P to prevent soil and freshwater from contamination. To investigate the relationship between 0.01M $CaCl_2$ soluble P, and available P and P sorption capacity of 40 soils, P content and P sorptivity were analyzed. Single linear relationship revealed the dependence of 0.01M $CaCl_2-P$ on available P($r^2=0.479$), bioavailable P($r^2=0.281$), P sorption($r^2=-0.465$) and P absorption coefficient($r^2=-0.056^{NS}$). Thus available P as $P_2O_5$(AVP) and P sorption (PS) were most important factors in determining the concentration of 0.01M $CaC1_2-P$($CaC1_2-P$). In multinomial equation related $CaC1_2-P$ with AVP and PS, the determination coefficient was improved to 0.745. The logarithm of $CaC1_2-P$ was linearly related to AVP/PS. Consequently, the equation, $0.01M\;CaCl_2-P=0.1284e^{0.3288AVP/PS}$ could be suggested to estimate the concentration of P in 20mL of 0.01M $CaCl_2$ solution containing 2g of soil shaken for 17 hours.

• Journal of the Korea Institute of Building Construction
• /
• v.23 no.3
• /
• pp.251-260
• /
• 2023

The construction of free-form structures with intricate curved exteriors necessitates the use of bespoke molds. To fulfill this requirement, a blend of Phase Change Material(PCM) and Ultra-High Performance Concrete(UHPC) is utilized. PCM endows the solution with recyclability, while UHPC facilitates the effortless execution of curvature in the mold fabrication process. However, it's worth mentioning that the melting point of PCM hovers around 58-64℃, and the heat emanating from UHPC's hydration process can potentially jeopardize the integrity of the PCM mold. Hence, experimental validation of the mold shape is a prerequisite. In the conducted experiment, UHPC was poured into two distinct mold types: one that incorporated a 3mm silicone sheet mounted on the fabricated PCM mold(Panel A), and the other devoid of the silicone sheet(Panel B). The experimental outcomes revealed that Panel A possessed a thickness of 3.793mm, while Panel B exhibited a thickness of 5.72mm. This suggests that the mold lacking the silicone sheet(Panel B) was more susceptible to the thermal effects of hydration. These investigations furnish invaluable fundamental data for the manufacturing of ultra-high strength irregular panels and PCM molds. They contribute substantially to the enrichment of comprehension and application of these materials within the realm of construction.

• The Korean Journal of Air & Space Law and Policy
• /
• v.1
• /
• pp.47-85
• /
• 1989

The Fundamental purpose of the Warsaw Convention was to establish uniform rules applicable to international air transportation. The emphasis on the benefits of uniformity was considered important in the beginning and continues to be important to the present. If the desire for uniformity is indeed the mortar which holds the Warsaw system together then it should be possible to agree on a worldwide liability limit. This liability limit would not be so unreasonable, that it would be impossible for nations to adhere to it. It would preclude any national supplemental compensation plan or Montreal Agreement type of requirement in any jurisdiction. The differentiation of liability limits by national requirement seems to be what is occurring. There is a plethora of mandated limits and Montreal Agreement type 'voluntary' limits. It is becoming difficult to find more than a few major States where an unmodified Warsaw Convention or Hague Protocol limitation is still in effect. If this is the real world in the 1980's, then let the treaty so reflect it. Upon reviewing the Warsaw Convention, its history and the several attempts to amend it, strengths become apparent. Hijackings of international flights have given rise to a number of lawsuits by passengers to recover damages for injuries suffered. This comment is concerned with the liability of an airline for injuries to its passengers resulting from aviation terrorism. In addition, analysis is focused on current airline security measures, particularly the pre-boarding screening system, and the duty of air carriers to prevent weapons from penetrating that system. An airline has a duty to exercise a high degree of care to protect its passengers from the threat of aviation terrorism. This duty would seemingly require the airline to exercise a high degree of care to prevent any passenger from smuggling a weapon or explosive device aboard its aircraft. In the case an unarmed hijacker who boards having no instrument in his possession with which to promote the hoax, a plaintiff-passenger would be hard-pressed to show that the airline was negligent in screening the hijacker prior to boarding. In light of the airline's duty to exercise a high degree of care to provide for the safety of all the passengers on board, an acquiescene to a hijacker's demands on the part of the air carrier could constitute a breach of duty only when it is clearly shown that the carrier's employees knew or plainly should have known that the hijacker was unarmed. A finding of willful misconduct on the part of an air carrier, which is a prerequisite to imposing unlimited liability, remains a question to be determined by a jury using the definition or standard of willful misconduct prevailing in the jurisdiction of the forum court. Through the willful misconduct provision of the Warsaw Convention, air carrier face the possibility of unlimited liability for failure to implement proper preventive precautions against terrorist. Courts, therefore, should broadly construe the willful misconduct provision of the Warsaw Convention in order to find unlimited liability for passenger injuries whenever air carrier security precautions are lacking. In this way, the courts can help ensure air carrier safety and prevention against terrorist attack. Air carriers, therefore, would have an incentive to increase, impose and maintain security precautions designed to thwart such potential terrorist attacks as in the case of Korean Air Lines Flight No.858 incident having a tremendous impact on the civil aviation community. The crash of a commercial airliner, with the attending tragic loss of life and massive destruction of property, always gives rise to shock and indignation. The general opinion is that the legal system could be sufficient, provided that the political will is there to use and apply it effectively. All agreed that the main responsibility for security has to be borne by the governments. I would like to remind all passengers that every discovery of the human spirit may be used for opposite ends; thus, aircraft can be used for air travel but also as targets of terrorism. A state that supports aviation terrorism is responsible for violation of International Aviation Law. Generally speaking, terrorism is a violation of international law. It violates the soverign rights of the states, and the human rights of the individuals. I think that aviation terrorism as becoming an ever more serious issue, has to be solved by internationally agreed and closely co-ordinated measures. We have to contribute more to the creation of a general consensus amongst all states about the need to combat the threat of aviation terrorism.

• Journal of Korean Neurosurgical Society
• /
• v.29 no.12
• /
• pp.1555-1562
• /
• 2000

Objects : Surgical management of the distal anterior cerebral artery(DACA) aneurysms presents several unique problems to surgeons, such as difficulty in early identification of parent arteries, high incidence of rebleeding and premature rupture, and requirement of unfamiliar approach other than conventional frontotemporal craniotomy. Therefore, preoperative anatomical knowledge of anterior interhemispheric fissure and entry point of dissection is prerequisite. Authors utilized a frontobasal approach for DACA aneurysms by using consistent external landmark for guidance to the deep structure. Materials and Methods : From Nov. 1995 to Jun. 1999, a surgical clipping of DACA aneurysms was carried out in 9 patients among a total 131 patients with intracranial aneurysms. In each case, the clinical and aneurysmal features were carefully reviewed through the angiograms, medical records, and intraoperative findings. Results : The incidence of DACA aneurysms was 6.9% from our series. All cases were arisen from juxtacallosal por-tion ; 6 cases from pericallosal-callosomarginal(PC-CM) junction and 3 from pericallosal-frontopolar(PC-FP) junction. Associated vascular anomalies were noted in 3 cases and multiple aneurysms in 3 cases, respectively. The preoperative clinical grades were generally poor. An early surgery was performed in 7 cases and frontobasal interhemispheric approaches in 7 cases. Postoperatively, two patients died of complications ; one delayed ischemic vasospasm and one aspiration pneumonia but remaining patients recovered well. Conclusion : The frontobasal interhemispheric approach was useful for DACA aneurysms in early surgery. Division of superior sagittal sinus(SSS) enabled a minimal retraction of brain on both sides, and prevention of intraoperative rupture was possible. Authors suggest the frontopolar(first frontal bridging) vein as a constant external landmark for approaching the genu of the corpus callosum and juxtacallosal DACA aneurysms.

• Journal of Preventive Medicine and Public Health
• /
• v.16 no.1
• /
• pp.135-152
• /
• 1983

Emergency medical service is an important part of the health care delivery system, and the optimal allocation of resources and their efficient utilization are essentially demanded. Since these conditions are the prerequisite to prompt treatment which, in turn, will be crucial for life saving and in reducing the undesirable sequelae of the event. This study, taking the hyperbaric chamber for carbon monoxide poisoning as an example, is to develop a stochastic approach for solving the problems of optimal allocation of such emergency medical facility in Korea. The hyperbaric chamber, in Korea, is used almost exclusively for the treatment of acute carbon monoxide poisoning, most of which occur at home, since the coal briquette is used as domestic fuel by 69.6 per cent of the Korean population. The annual incidence rate of the comatous and fatal carbon monoxide poisoning is estimated at 45.5 per 10,000 of coal briquette-using population. It offers a serious public health problem and occupies a large portion of the emergency outpatients, especially in the winter season. The requirement of hyperbaric chambers can be calculated by setting the level of the annual queueing rate, which is here defined as the proportion of the annual number of the queued patients among the annual number of the total patients. The rate is determined by the size of the coal briquette-using population which generate a certain number of carbon monoxide poisoning patients in terms of the annual incidence rate, and the number of hyperbaric chambers per hospital to which the patients are sent, assuming that there is no referral of the patients among hospitals. The queueing occurs due to the conflicting events of the 'arrival' of the patients and the 'service' of the hyperbaric chambers. Here, we can assume that the length of the service time of hyperbaric chambers is fixed at sixty minutes, and the service discipline is based on 'first come, first served'. The arrival pattern of the carbon monoxide poisoning is relatively unique, because it usually occurs while the people are in bed. Diurnal variation of the carbon monoxide poisoning can hardly be formulated mathematically, so empirical cumulative distribution of the probability of the hourly arrival of the patients was used for Monte Carlo simulation to calculate the probability of queueing by the number of the patients per day, for the cases of one, two or three hyperbaric chambers assumed to be available per hospital. Incidence of the carbon monoxide poisoning also has strong seasonal variation, because of the four distinctive seasons in Korea. So the number of the patients per day could not be assumed to be distributed according to the Poisson distribution. Testing the fitness of various distributions of rare event, it turned out to be that the daily distribution of the carbon monoxide poisoning fits well to the Polya-Eggenberger distribution. With this model, we could forecast the number of the poisonings per day by the size of the coal-briquette using population. By combining the probability of queueing by the number of patients per day, and the probability of the number of patients per day in a year, we can estimate the number of the queued patients and the number of the patients in a year by the number of hyperbaric chamber per hospital and by the size of coal briquette-using population. Setting 5 per cent as the annual queueing rate, the required number of hyperbaric chambers was calculated for each province and for the whole country, in the cases of 25, 50, 75 and 100 per cent of the treatment rate which stand for the rate of the patients treated by hyperbaric chamber among the patients who are to be treated. Findings of the study were as follows. 1. Probability of the number of patients per day follows Polya-Eggenberger distribution. $$P(X=\gamma)=\frac{\Pi\limits_{k=1}^\gamma[m+(K-1)\times10.86]}{\gamma!}\times11.86^{-{(\frac{m}{10.86}+\gamma)}}$$ when$${\gamma}=1,2,...,n$$$$P(X=0)=11.86^{-(m/10.86)}$$ when $${\gamma}=0$$ Hourly arrival pattern of the patients turned out to be bimodal, the large peak was observed in $7 : 00{\sim}8 : 00$ a.m., and the small peak in $11 : 00{\sim}12 : 00$ p.m. 2. In the cases of only one or two hyperbaric chambers installed per hospital, the annual queueing rate will be at the level of more than 5 per cent. Only in case of three chambers, however, the rate will reach 5 per cent when the average number of the patients per day is 0.481. 3. According to the results above, a hospital equipped with three hyperbaric chambers will be able to serve 166,485, 83,242, 55,495 and 41,620 of population, when the treatmet rate are 25, 50, 75 and 100 per cent. 4. The required number of hyperbaric chambers are estimated at 483, 963, 1,441 and 1,923 when the treatment rate are taken as 25, 50, 75 and 100 per cent. Therefore, the shortage are respectively turned out to be 312, 791. 1,270 and 1,752. The author believes that the methodology developed in this study will also be applicable to the problems of resource allocation for the other kinds of the emergency medical facilities.