• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.236-238
• /
• 2005

In this paper, we propose a new discrete-time predictive current controller for a PMLSM(permanent magnet linear synchronous motor). The main objectives of the current controllers are that the measured stator current is tracked the command current value accurately and the transient interval is shorten as much as possible, in order to obtain high-performance of ac drive system. The conventional predictive current controller is hard to implement in full digital current controller since a finite calculation time causes a delay between the current sensing time and the time that take to apply the voltage to motor. A new control strategy is the schema that gets the fast adaptation of transient current change, the fast transient response tracking. Moreover, the simulation results will be verified the improvements of Predictive controller and accuracy of the current controller.

• International Journal of Safety
• /
• 제5권2호
• /
• pp.6-11
• /
• 2006

The time delay in servo control on LonWorks/IP Virtual Device Network (VDN) is highly stochastic in nature. LonWorks/IP VDN induced time delay deteriorates the performance and stability of the real-time distributed control system and hinders an effective preventive and predictive maintenance. Especially in real-time distributed servo applications on the factory floor, timely response is essential for predictive and preventive maintenance. In order to guarantee the stability and performance of the system for effective preventive and predictive maintenance, LonWorks/IP VDN induced time delay needs to be predicted and compensated for. In this paper position control simulation of DC servo motor using Zero Phase Error Tracking Controller (ZPETC) as a feedforward controller, and Internal Model Controllers (IMC) based on Smith predictor with disturbance observer as a feedback controller is performed. The validity of the proposed control scheme is demonstrated by comparing the IMC based on Smith predictor with disturbance observer.

• 제어로봇시스템학회논문지
• /
• 제20권9호
• /
• pp.908-913
• /
• 2014

In this paper, we propose a method by which QP (Quadratic Programming) problems can be solved in realtime so that we can implement the predictive control algorithm on a microcontroller system. Firstly, we derive a solution to QP problems by converting the original QP problems to its equivalent least squares with inequalities. Secondly, we propose a predictive control algorithm that can give good realtime computation performance by utilizing the fact that some parameters needed for solving QP problems can be computed offline. Finally, we illustrate that the proposed method can give good realtime features by running the C-code application constructed using the proposed method on a microncontroller system.

• International Journal of Control, Automation, and Systems
• /
• 제6권1호
• /
• pp.126-134
• /
• 2008

As many systems depend on electronics, concern for fault tolerance is growing rapidly. For example, a car with its steering controlled by electronics and no mechanical linkage from steering wheel to front tires (steer-by-wire) should be fault tolerant because a failure can come without any warning and its effect is devastating. In order to make system fault tolerant, there has been a body of research mainly from aerospace field. This paper presents the structure of predictive hybrid redundancy that can remove most erroneous values. In addition, several numerical simulation results are given where the predictive hybrid redundancy outperforms wellknown average and median voters.

• 전기학회논문지
• /
• 제60권7호
• /
• pp.1360-1365
• /
• 2011

Electro-hydraulic servo motor is used to a lot of in the field of industrial equipment which requires one of the control functions among pressure, flow, and power output. In this paper, linear discrete reference model of the electro-hydraulic servo motor system are made for 1-step ahead predictive control. The parameters of electro-hydraulic servo motor system are estimated using the recursive least square method. 1-step ahead predictive model output of electro-hydraulic servo motor system corresponded to reference model output in spite of estimated parameters are not meet real parameters. Control performance affections are studied due to the forgetting factors variation.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1975-1980
• /
• 2004

A parallel active power filter is designed and implemented to compensate for undesired current harmonics generated by a nonlinear load. The filter works based on PWM strategy and control signal is generated using a model predictive controller. To evaluate the achievements, a PI controller is also designed and implemented. Experimental results indicate about 50% increase in the efficiency over PI controller.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.1068-1071
• /
• 1993

An algorithm of fuzzy predictive sliding control is proposed to design a jet engine control system. Sliding control using predictive scheme is adopted to compensate the time delay of fuel injector. Fuzzy rule-base is also introduced to adjust the command input for suppressing the surge. The potential of the proposed algorithm is shown through simulations utilizing a typical engine-only model.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.145-149
• /
• 1993

This paper considers the adaptive predictive control problem of a system characterized by a multiplexed measurements and multirate sampling mechanism. Plant outputs are measured in various sampling rates through a multiplexed measurement system where a single common instrument is shared by several controllers. In general, output measurement sampling rate is assumed to be slower that input update rate. An adaptive predictive control algorithm is developed for systems with multiplexed measurements.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 추계학술대회(한국공작기계학회)
• /
• pp.57-61
• /
• 2001

A conceptional framework is proposed in which a general feedback predictive controller is taken to be a feedback interconnection of controller and GPC (General predictive Control). Numerical example are included to illustrate the procedure and to show the performance of the control system.

• 전기학회논문지P
• /
• 제51권4호
• /
• pp.206-210
• /
• 2002

The transmission delays in the networked control systems affect the performance and stability. For covering the delays, this paper proposes NCS including the predictive strategy. The proposed method shows that the two cases such as stable and unstable system are well behaved.