• 한국항공우주학회지
• /
• 제36권2호
• /
• pp.123-130
• /
• 2008

예조건화 나비어스톡스 방정식의 수렴 특성에 미치는 특성 조건수의 영향을 조사하였다. Choi와 Merkle 예조건화를 적용한 경우와 온도 예조건화를 적용한 경우의 수렴 특성을 분석하였다. 공간차분을 위해 예조건화 Roe의 FDS 기법을 적용하였고, 시간적분을 위해 LU-SGS 기법을 적용하였다. 나비어스톡스 방정식의 수렴 특성은 특성 조건수에 크게 영향을 받으며, 최적의 특성 조건수가 존재하는 것을 보였다. 그리고 점성 유동의 최적 특성 조건수는 비점성 유동에 비해 큰 것으로 나타났다.

• 한국추진공학회지
• /
• 제14권1호
• /
• pp.11-19
• /
• 2010

온도예조건화 나비어스톡스 방정식의 계산오차를 줄이기 위한 방법을 제시하였다. 이 방법은 또한 기존 예조건화 방법론에도 적용하였다. 제시된 방법의 타당성을 검토하기 위하여 다양한 마하수의 원형 실린더 주위의 단열 층류 점성 유동을 계산하였다. 엔탈피의 재정의를 통해 총엔탈피의 크기 정도를 줄임으로써 계산오차에 의한 온도예조건화의 수렴성 문제가 해결됨을 보였다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2001년도 춘계 학술대회논문집
• /
• pp.127-133
• /
• 2001

In this paper, the preconditioned multistage time stepping methods which are popular multigrid smoothers is studied for the compressible flow calculations. Fourier analysis on the local time stepping and block-Jacobi preconditioned residual operators is performed using the linearized 2-D Navier-Stokes equations. It fumed out that block-Jacobi preconditioner has better performance in eigenvalue clustering. They are implemented in the 2-D compressible Euler and Wavier-Stokes calculations with multigrid methods to verify that the block-Jacobi preconditioned multistage time stepping shows better performance in convergence acceleration.

• 대한기계학회논문집B
• /
• 제24권7호
• /
• pp.907-915
• /
• 2000

The preconditioned Krylov subspace methods were applied to the incompressible Navier-Stoke's equations for convergence acceleration. Three of the Krylov subspace methods combined with the five of the preconditioners were tested to solve the lid-driven cavity flow problem. The MILU preconditioned CG method showed very fast and stable convergency. The combination of GMRES/MILU-CG solver for momentum and pressure correction equations was found less dependency on the number of the grid points among them. A guide line for stopping inner iterations for each equation is offered.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.35-38
• /
• 2002

The convergence acceleration methods for the compressible Wavier-Stokes equations are studied ,which are multigrid method and implicit preconditioned multistage time stepping method. In this paper, the performance of implicit preconditioning methods are studied for the full-coarsening multigrid methods on the high Reynolds number compressible flow computations. The effect of numerical flux on the convergence are investigated for the inviscid and viscous calculations.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2002년도 추계 학술대회논문집
• /
• pp.95-102
• /
• 2002

Studies of the numerical characteristics of implicit upwind schemes, such as upwind ADI, Line Gauss-Seidel(LGS) and Point Gauss-Seidel(LU) algorithms, for preconditioned Navier-Stokes equations ate performed. All the algorithms are expressed in approximate factorization form and Von Neumann stability analysis and convergence studies are made. Preconditioning is applied for efficient convergence at low Mach numbers and low Reynolds numbers. For high aspect ratio computations, the ADI and LGS algorithms show efficient and uniform convergence up to moderate aspect ratio if we adopt viscous preconditioning based on min- CFL/max- VNN time-step definition. The LU algorithm, on the other hand, shows serious deterioration in convergence rate as the grid aspect ratio increases. Computations for practical applications also verify these results.

• 한국항공우주학회지
• /
• 제32권3호
• /
• pp.1-9
• /
• 2004

본 연구에서는 다중 격지 Navier-Stokes 방정식 해석의 수렴성 향상을 위하여 상류 차분 기법들의 주파수 영역에서의 특생 해석을 수행하였다. 1차 상류 차분 기법에 기반한 내재적 연산자의 예조건화 특성 향상을 위하여 다차원적인 효과를 갖는 2차 상류 차분 기법이 전통적인 2차 상류 차분 기법에 비하여 우수한 예조건화 특성을 가지는 이유를 제시하였다. 주파수 영역에서의 해석 결과에 대한 검증을 위하여 완전 성김 다중 격자 기법과 예 조건화된 다단계 시간 전진 기법을 적용하였다. 비 점성 유동장 및 Spalart-Allmaras 난류 모델을 이용한 난류 유동장 해석을 수행하였으며, 주파수 영역해석의 결과와 일치하는 우수한 수렴 특성을 가짐을 확인하였다.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2006년 제4회 한국유체공학학술대회 논문집
• /
• pp.349-352
• /
• 2006

The conventional segregated finite element formulation produces a small and simple matrix at each step than in an integrated formulation. And the memory and cost requirements of computations are significantly reduced because the pressure equation for the mass conservation of the Navier-Stokes equations is constructed only once if the mesh is fixed. However, segregated finite element formulation solves Poisson equation of elliptic type so that it always needs a pressure boundary condition along a boundary even when physical information on pressure is not provided. On the other hand, the conventional integrated finite element formulation in which the governing equations are simultaneously treated has an advantage over a segregated formulation in the sense that it can give a more robust convergence behavior because all variables are implicitly combined. Further it needs a very small number of iterations to achieve convergence. However, the saddle-paint-type matrix (SPTM) in the integrated formulation is assembled and preconditioned every time step, so that it needs a large memory and computing time. Therefore, we newly proposed the P2PI semi-segregation formulation. In order to utilize the fact that the pressure equation is assembled and preconditioned only once in the segregated finite element formulation, a fixed symmetric SPTM has been obtained for the continuity constraint of the present semi-segregation finite element formulation. The momentum equation in the semi-segregation finite element formulation will be separated from the continuity equation so that the saddle-point-type matrix is assembled and preconditioned only once during the whole computation as long as the mesh does not change. For a comparison of the CPU time, accuracy and condition number between the two methods, they have been applied to the well-known benchmark problem. It is shown that the newly proposed semi-segregation finite element formulation performs better than the conventional integrated finite element formulation in terms of the computation time.

• 한국전산유체공학회지
• /
• 제18권3호
• /
• pp.79-86
• /
• 2013

Preconditioned compressible Navier-Stokes equations are solved for almost incompressible flows. Unstructured meshes are utilized for spatial discretization of complex flow domain. Effectiveness of the current preconditioning algorithm, with respect to various Reynolds numbers and Mach numbers, is demonstrated by the solution of canonical problems for incompressible flows, e.g. driven cavity flows.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1999년도 춘계 학술대회논문집
• /
• pp.98-105
• /
• 1999

The Pressure-based Unstructured-grid Navier-Stokes Solver PUNS-2/3D for incompressible steady and unsteady viscous flows has been developed. It is based on nonstaggered cell-centered finite volume method. Second-order upwind scheme with least-square reconstruction is used for convective fluxes. The SIMPLE method is implemented to couple the pressure and velocity fields. And the time derivatives in the momentum equations are discretised using a second-order Euler backward-differencing scheme. The discretised linear equations are solved by the preconditioned Biconjugate Gradient Stabilized method(Bi-CGSTAB). The developed solver is applied to validation problems using hybrid meshes.