통합 검색 | Korea Science

Henmi, Nobuhiko;Tanaka, Michihiko
- International Journal of Precision Engineering and Manufacturing
- /
- 제8권2호
- /
- pp.9-13
- /
- 2007
We describe how to control a piezoelectric actuator using the open-loop method for point-to-point positioning. Since piezoelectric actuators have nonlinear characteristics due to hysteresis and creep between the input voltage and the resulting displacement, a special method is required to eliminate this nonlinearity for an open-loop drive. We have introduced open-loop driving methods for piezoelectric actuators in the past, which required a large input voltage and an initializing motion sequence to reset the state of the actuator before each movement. In this paper, we propose a new driving method that uses the initializing state. This method also utilizes the overshoot from both the upward and downward stepwise drives. Applying this method., we obtained precise point-to-point positioning without the influence of hysteresis and creep.
PDF KSCI

김봉규;박규열
- 한국정밀공학회:학술대회논문집
- /
- 한국정밀공학회 2001년도 춘계학술대회 논문집
- /
- pp.1093-1096
- /
- 2001
Eletrochemical phenomenon are employed in the manufacturing of micro-electrochemical machining(micro-ECM). The application of controlled electrochemical metal removal in the fabrication of microstructures and microcomponents is refer to as micro-electrochemical machining. In this paper, we introduce a new method named $\ulcorner$point-electrode electro chemical machining method$\lrcorner$ was proposed to establish micro fabrication technology by use of electrochemical machining. And we find effect of the electrochemical phenomenon in several conditions.
PDF

윤승원
- 한국정밀공학회:학술대회논문집
- /
- 한국정밀공학회 1995년도 춘계학술대회 논문집
- /
- pp.573-577
- /
- 1995
An integration method for the hypersingular kernels, in the boundary integralequations used for the solution of crack-like problems in elasticity, has been developed. To isolate the stronger singularities, the actual boundaries are replaced by the smoothly curved auxiliary boundaries which provide the detoured, non-singular integration paths. The auxiliary boundary can be interpreted as a contracted form of the actual boundaries except for the singular element where the collocating point is located. For an optimal integration path for every singular collocation point, the auxiliary boundary may have different shape depending on the position of the collocation point on the singular element.

이성희;고영배;이종원;정해철;박재현;이옥성
- Design & Manufacturing
- /
- 제6권2호
- /
- pp.74-78
- /
- 2012
A multi-cavity injection mold system of protein chip for point-of-care with cavity temperature and pressure sensors was proposed in this work. In advance of manufacturing for the multi-cavity injection mold system, a single cavity injection mold system to mold protein chip was considered. Injection molding analysis for the presented system was performed to optimize the process of the molding and suggest guides to design. On the basis of the results for the single cavity system, a multi-cavity injection mold system for protein chip was analyzed, designed and manufactured with cavity temperature and pressure sensors. Results of balanced filling for protein chip models were obtained from the presented mold system.
PDF

김국원
- 한국정밀공학회지
- /
- 제19권8호
- /
- pp.126-133
- /
- 2002
The cutting thickness of ultra-precision machining is generally very small, only a few micrometer or even down to the order of a few nanometer. In such case, a basic understanding of the mechanism on the micro-machining process is is necessary to produce a high quality surface. When machining at very small depths of cut, metal flow near a rounded tool edge become important. In this paper a finite element analysis is presented to calculate the stagnation point on the tool edge or critical depth of cut below which no cutting occurs. From the simulation, the effects of the cutting speed on the critical depths of cut were calculated and discussed. Also the transition of the stagnation point according to the increase of the depths of cut was observed.
PDF KSCI