• 수산해양기술연구
• /
• 제40권1호
• /
• pp.17-22
• /
• 2004

This study was carried out at the CWC of Chosun university for the purpose of resistance performance improvement of planing hull, and the results of the tests were confirmed cooperatively with WJFEL. G/T 100 ton class planing hull form was selected, and the improvement of hull form including appendages were performed by using some model test techniques. The model test scope comprises resistance relative tests including wave profile observation, trim and sinkage measurement and flow visualization tests at full load and trial conditions for one bare hull and for two appended hulls. The final wedge and spray strip combined with improved hull form showed about 1.0 knot speed improvement at both of full and trial conditions, and outstanding improvement for fore wave phenomena.

• 대한조선학회논문집
• /
• 제53권1호
• /
• pp.10-17
• /
• 2016

When a planing hull straightly runs and turns, its floating position and pitch angle are changed depending on its speed, and large transient motion happens. In this paper, six degrees of freedom(6 DOF) equations of motion, which could simulate the motion of a planing hull, are established. Static and dynamic forces in vertical plane are modeled using pre-calculated displacements and metacentric heights depending on various draft, lift under bottom, and vertical damping coefficients which are used to tune the final motion. Hydrodynamic coefficients in horizontal plane at various equilibrium state are calculated by using Lewandowski's empirical formula and the speed-dependent equilibrium state are calculated beforehand by Savitsky's formula. The speed effects are considered by curve-fitting the coefficients at various speed to the polynomials. Accelerating, decelerating and backing, turning, and zig-zag are simulated and compared with the sea trial results, and it is confirmed that the speed reduction, roll, and pitch during such maneuvers of sea trial and simulation are well consistent.

• 한국농촌건축학회논문집
• /
• 제26권4호
• /
• pp.45-52
• /
• 2024

This study begins with the situation experienced by the researcher in the pre-planning of space creation project the high school credit system at ◯◯ High School in Jeonbuk state, where he was a facilitator. The purpose is to record and share the process of space creation through pre-planning to provide a little information to schools that may experience similar situations and to examine the institutional limitations of pre-planning for educational facilities. The following problems were identified through the process and results of pre-planning at ◯◯ High School. It was confirmed that various problems occurred because the plan prepared by the school for the high school credit system space creation project was prepared without experts and pre-planning was carried out based on this.

• 한국초등과학교육학회지:초등과학교육
• /
• 제25권2호
• /
• pp.191-205
• /
• 2006

The purpose of this study was to explore strategies used by pre-service elementary science teachers in planning a science lesson. The participants were six senior students from a national university of education located in the midwestern area of Korea. Data regarding their planning strategies were gathered through both thinking-aloud and observation. Research findings suggest that: three of the teachers had little understanding of the necessity of reviewing unit contents or prior learning for planning a science lesson; five student teachers relied heavily on learning objectives presented in teachers' guidebooks without considering their appropriateness; all teachers exhibited an intention of composing different activities or teaching approaches from teachers' guidebooks; only two teachers thought about learners' prior knowledge or understanding levels; five and three teachers had poor understanding of discovery learning models and importance of teacher's questioning, respectively; and five teachers paid little attention to assessment.

• 한국디지털건축인테리어학회논문집
• /
• 제7권2호
• /
• pp.43-50
• /
• 2007

The aged population increasing rapidly, the population rate of over 65 years old was over 7.5% in 2000 in Korea. It means that Korea is aging society. But, the aged welfare accommodation are still insufficient and more facilities accommodating the aged should be built. This situations made a new concept of silver town of the welfare facility for the aged. The purpose of this study was to find the difference of preferences about silver town between elderly group and pre-elderly group in Chungseo province. Focused on housing type and space composition of silver town, the results of this study will provide some useful information for the development of silver town and for further studies. It is very important to refer to the preference about silver town of elderly group and pre-elderly group for planing the silver town. Main results of this study showed that silver town was the most preferable elderly housing alternative for elderly group. And silver town should be provided health care center for elderly group.

• 한국환경교육학회지:환경교육
• /
• 제20권1호
• /
• pp.90-105
• /
• 2007

The purpose of this study is to find the influence of environmental issue analysis instruction on the environmental decision making ability for grade 5 elementary school students. The study was done through pre and post testing control group structure. The object of this study is grade 5 of I elementary school students which were divided into 35 student test group and 54 student control group. Through studying references, the selection standard of appropriate environment issue and the environmental issue analysis instructing objective. Conducted the environment issue instructing based on the selected environment issue and instructing objective. The classes were held in total of 6 sessions in the chapters related to class objective and class content within the curriculum. The pre and post testing was done using environment decision making ability test sheet which was reconstructed by myself and the results were analyzed by t-test. As a result of comparing pre and post testing the students in test group showed significant results in the processes of problem recognition, evaluation of alternatives, behave planing (p<.001). As a result of comparing the differences of environment decision making ability of pre and post test of test group and control group, it showed significant results in the process of evaluation of alternatives(p<.00l). The environment issue analysis class has positive influence on the environment decision making abilities of the students but since the outcome of environment decision making ability is lower, there is a need for long term environment education plan and further studies to find whether the environment issues within the textbook is appropriate in the elementary student level, useful school aspect and the influence of environment issue analysis class on the change of values for individuals.

• Journal of Periodontal and Implant Science
• /
• 제26권1호
• /
• pp.117-132
• /
• 1996

The purpose of this study was to evaluate the bacterial adherence on e-PTFE membrane immersed in whole saliva from subjects with different periodontal status. Experiment involved 3 subject groups: 5 persons with healthy periodontium(probing depth below 3mm and no signs of gingival inflammation including bleeding on probing), 10 patients with gingivitis(probing depth below 3mm and apparent signs of gingival inflammation), and 10 patients with advanced periodontitis(probing depth over 7mm and apparent signs of gingival inflammation). Each disease group was included before and after scaling and root planing treatment. After obtaining whole saliva from each subject, e-PTFE membrane(Gore-Tex periodontal membrane : $GTPM^{(R)}$, W.L. Gore & Associates, Flagstaff, USA) specimens were immersed at room temperature in the saliva aliqouts for 1, 3, 7 days. The weight between pre - and post - immersion in saliva was measured with the analytical balance and the difference was recorded. The specimens were processed for SEM observation. The bacterial adherence on the membrane specimens was evaluated using the scanning electron microscope images. The obtained results were as follows : 1. There was no difference in the weight of bacteria adherent to e-PTFE membrane specimens according to the periodontal status and the immersion periods. 2. As the exposure time to saliva increased, the bacterial adherence to the membrane specimen significantly increased in all groups(P<0.005). 3. As the severity of periodontal disease increased, the bacterial adherence to the membrane specimens significantly increased(p<0.001). 4. After scaling and root planing, the bacterial adherence to the membrane specimens significantly decreased in gingivitis and periodontitis patient group(P<0.001). These results suggest that bacterial contamination on exposed barrier membrane surface be reduced through improvement of periodontal status and oral health environment before and after GTR procedure for the successful outcome.

• International Journal of Oral Biology
• /
• 제40권2호
• /
• pp.93-101
• /
• 2015

The efficacy of air-polishing on subgingival debridement, as compared to scaling and root planning (SRP), was evaluated clinically and microbiologically. Fifteen patients diagnosed as chronic periodontitis, and having single-root tooth over 5 mm of pocket depth symmetrically in the left and right quadrant, were investigated. Subgingival debridement was performed by SRP and air-polishing. The results were evaluated and compared clinically and microbiologically. Probing pocket depth (PPD), bleeding on probing (BOP), relative attachment level (RAL) and change of gingival crevicular fluid (GCF) were assessed before treatment, and at 14 and 60 days after treatment. Microbial analysis was done pre-treatment, post-treatment, and at 14 and 60 days after treatment. Results of air polishing showed that post treatment, the PPD and BOP decreased, and attachment gain was observed. There was no clinical difference when compared to SRP. The volume of GCF decreased at 14 days, and increased again at 60 days. Compared to SRP, there was a statistical significance of the volume of GCF at 60 days in air-polishing. In the microbial analysis, high-risk bacteria that cause periodontal disease were remarkably reduced. They decreased immediately after treatment, but increased again with the passage of time. Thus, our results show that subgingival debridement by air-polishing was effective for decrease of pocket depth, attachment gain, decrease of GCF and inhibition of pathogens. Further studies are required to compare air-polishing and SRP, considering factors such as degree of pocket depth and calculus existence.

• Journal of Periodontal and Implant Science
• /
• 제27권3호
• /
• pp.585-595
• /
• 1997

Removal of subgingival calculus is essential for the success in periodontal treatment. Subgingival instrumentation is used for the removal of all bacterial plaque and calculus. In this study, two types of anterior curet were used on ant. teeth to conduct subgingival scaling and root planing. The remaining amount of calculus was evaluated according to type of instrument, depth of pocket, and tooth surface. 24 teeth extracted from patients being treated at Dan Kook University dept. Perio. were used. 4 surfaces per tooth a total of 96 areas were evaluated. 12 teeth treated with Gracey No. 1-2 was used as the control group and 12 teeth treated with Mini-five curet No. 1-2 was the experimental group. The 4 surfaces of the teeth {buccal, mesial, lingual or palatal, distal) were observed under a stereomicroscope and the images were captured 3 times per surfaced with a CCD. The image were observed on the monitor using a $10{\times]10$ grid produced with the Microsoft power point. The amount of calculus remaining was evaluated 3 times per surface. The results were as follows. 1. There was no significant difference in remaining calculus according to the pre-treatment pocket depth, and tooth position{Mx. or Mn). 2. The Mini-five curet showed better results than the Gracey curet but there was no statistically significant difference. 3. In both Gracey curet group and Mini-five curet group the lingual(or palatal) surface showed significant difference compared to the other surfaces(p<0.05). From the results above, it is thought that when treating ant. teeth consideration of the tooth surface is more important than the choice of instrument.

• 대한전기학회논문지:전력기술부문A
• /
• 제53권9호
• /
• pp.521-528
• /
• 2004

The demise of the native franchise markets and the emergence of competitive markets in electricity generation service is substantially altering the way that operation and planning activity is conducted and is making it increasingly difficult for market participants such as generation firms to prospect the future electricity markets. Traditional generation expansion planning (GEP) problems which centrally determine the least-cost capacity addition plan that meets forecasted demand within pre-specified reliability criteria over a planning horizon (typically 10 to 20 years) is becoming no more valid in competitive market environments. Therefore, it requires to develop a new methodology for generation investments, which is applicable to the changed electric industry business environments and is able to address the post-privatization situation where individual generation firms seek to maximize their return on generation investments against uncertain market revenues. This paper formulates a new generation expansion planning problem and solve it in a market-oriented manner.