• Transactions of the Korean hydrogen and new energy society
• /
• v.30 no.6
• /
• pp.593-600
• /
• 2019

The combustion characteristics of methane/hydrogen pre-mixed flame have been investigated with swirl stabilized flame in a laboratory-scale pre-mixed combustor with constant heat load of 5.81 kW. Hydrogen/methane fuel and air were mixed in a pre-mixer and introduced to the combustor through a burner nozzle with different degrees of swirl angle. The effects of hydrogen addition and swirl intensity on the combustion characteristics of pre-mixed methane flames were examined using particle image velocimetry (PIV), micro-thermocouples, various optical interference filters and gas analyzers to provide information about flow velocity, temperature distributions, and species concentrations of the reaction field. The results show that higher swirl intensity creates more recirculation flow, which reduces the temperature of the reaction zone and, consequently, reduces the thermal NO production. The distributions of flame radicals (OH, CH, C₂) are dependent more on the swirl intensity than the percentage of hydrogen added to methane fuel. The NO concentration at the upper part of the reaction zone is increased with an increase in hydrogen content in the fuel mixture because higher combustibility of hydrogen assists to promote faster chemical reaction, enabling more expansion of the gases at the upper part of the reaction zone, which reduces the recirculation flow. The CO concentration in the reaction zone is reduced with an increase in hydrogen content because the amount of C content is relatively decreased.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.35 no.12
• /
• pp.1477-1485
• /
• 2011

Dyeability and colorfastness of the blended knits of cotton/rayon (40/60; C/R) and wool/tencel (10/90; W/T) are examined using the natural dyestuff ($Pinux^{TM}$) manufactured from Pinus radiata pine bark extract. In addition, pre-treatments (such as bleaching, mercerization and cationization) are performed to improve dyeability and colorfastness. The $Pinux^{TM}$ powder dyestuffs produced by Pinux Co., Ltd. are used as dyestuffs and their properties are examined for dyeing concentration (0.5-2% (owb)), dyeing time (30-120 minutes) and dyeing temperature (30-$90^{\circ}C$). Dyeability is evaluated with K/S value at 400nm, which is the maximum absorption wavelength for $Pinux^{TM}$. The results show the dyeability of W/T sample containing protein fiber with $Pinux^{TM}$ is superior to all cellulose fiber C/R. A concentration of dyestuff greater than 1.5% (owb), dyeing time 120 minutes and dyeing temperature of $90^{\circ}C$ are the most optimized conditions. It shows that the dyeability of C/R and W/T samples are high in the condition of an acid-dyeing bath and that dyeability highly declined in alkaline bath due to the instability of the proanthocyanidin pigment. After analyzing the effect of bleaching, mercerizing and cationizing (as pre-treatments on dyeability) it was concluded that the dyeability of the C/R sample was enhanced by mercerization but no significant effect by cationization. However, the simultaneous treatment of cationizing and dyeing resulted in far improved dyeability compared to dyeing after cationizing pre-treatment. As for the W/T sample, the effect of cationization was more prominent than the C/R sample. Colorfastness to color changes in the control W/T sample was higher than that of C/R's level 1-2, and it increased to Level 2 when bleaching pre-treatment was given and when a simultaneous cationizing treatment was adopted to the dyeing process. Colorfastness to light in W/T control sample resulted in Level 3 and further increased to an excellent Level of 4 with bleaching and simultaneous cationizing during dyeing process.

• Journal of Korean Society on Water Environment
• /
• v.35 no.4
• /
• pp.299-307
• /
• 2019

The purpose of this study was to investigate the effect of low temperature thermal pre-treatment on biodegradation of waste activated sludge for anaerobic digestion as a countermeasure for increasing sludge generation. The experimental condition was accomplished in 2 %, 4 %, and 6 % TS concentration, and $70^{\circ}C$, $80^{\circ}C$, $90^{\circ}C$ of temperature for a maximum of 120 minutes retention time. Then, it was followed by analysis of physical/chemical properties, BMP test and composition of biogas. The biogas characteristic was evaluated by applying the modified Gomperz model. As a result, solubility of dissolved substrate, such as $SCOD_{Cr}$, soluble carbohydrate, and soluble protein, and biogas production increased as temperature increased. Solubilization efficiency at $90^{\circ}C$ was 18.4 %, 17.03 % and 16.88% in 2 %, 4 %, and 6 % TS concentration respectively. Also, solubilization rates of carbohydrate and protein similarly increased. BMP test results also showed that methane production in excess sludge increased to 0.194, 0.187 and $0.182m^3/kg$ VS. respectively, and lag phase decreased to 0.145, 0.220, 0.351 day due to acceleration of the hydrolysis step. Consequently, low-temperature thermal pre-treatment could increase biodegradability of sludge, positively affecting biogas production and sludge reduction.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.27 no.6
• /
• pp.295-302
• /
• 2017

In this study, the effect of pre-curing process on the enhancement of mechanical properties of IGCC-slag-based-geopolymer was studied. Pre-curing is a process in which the green geopolymer is left at room temperature for a certain period of time prior to the high-temperature curing, and it is known as increasing the strength of a specimen. Therefore, in this experiment, the compressive strength of the geopolymers was measured according to various pre-curing conditions, and microstructure and crystal phase changes were observed by SEM and XRD, respectively. The W/S ratio was determined to be 0.26, which can offer the maximum geopolymer strength with easy molding ability, and the concentration of the alkali solution was 15 M. Pre-curing was performed at room temperature for 0 to 27 days. Compressive strength of the geopolymer made with pre-curing process increased by 36~87 % compared with the specimens made with no pre-curing process. Those improved compressive strength for the pre-cured geopolymer was confirmed owing to promotion effect of pre-curing process on generation of C-S-H gel and zeolite phases, which were analyzed using by XRD and SEM measurement.

• Journal of Life Science
• /
• v.20 no.4
• /
• pp.555-560
• /
• 2010

The objective of this study was to investigate levels of serum creatinine, CuSOD and MnSOD protein expression in the kidney after renal ischemic reperfusion with pre-exercise using heat shock protein 70.1 in knock-out mice (KO). The C57/BL6 strain (Wild type: WT) and KO were divided into 4 groups as follows: Sham control group (Sham), pre-exercise group (Ex), pre-exercise +ischemia group (Ex+IR), and ischemia group (IR). CuSOD and MnSOD expression were significantly decreased (p<0.01, p<0.05) and blood creatinine concentration was significantly increased (p<0.01) in the IR group of KO. In contrast, CuSOD and MnSOD expression in the Ex+IR group of KO were higher than the IR group, while creatinine concentration was significantly lower. These results suggest that Hsp70 is directly correlated to renal ischemic reperfusion injury. Pre-exercise in renal ischemia might prevent or inhibit positive oxidative stress inhibitory effects by increasing anti-oxidative enzymes (CuSOD, MnSOD) within the kidney and improve to prevent renal function. Thus, pre-exercise may have a protective role against renal injury after renal ischemia.

• The Korean Journal of Food And Nutrition
• /
• v.30 no.6
• /
• pp.1176-1183
• /
• 2017

This study was investigated the quality characteristics and antioxidant of dried Dioscorea bulbifera with various pre-soaking concentrations of oligosaccharide. Dioscorea bulbifera are prepared by additions of 0, 4, 6, 8 and 10% oligosaccharide solution, and dried at $50^{\circ}C$. The effects of pre-soaking percent of Dioscorea bulbifera slices were evaluated by the moisture, soluble solid, pH, titratable acidity, color, browning degree, texture, antioxidant activities and sensory test. According to the percent of pre-soaking oligosaccharide solution was increased, the moisture was increased but soluble solids and titratable acidity were decreased. With respect to the result of colors, Dioscorea bulbifera slices that underwent the 10% pre-soaked process (85.86%) were lighter than control (73.88%). However, the redness and yellowness scores were the lowest than control. The springiness and cohesiveness of texture showed no significant differences among all groups. Gumminess and chewiness of texture results were increased according to per-soaking concentration increase. Also the polyphenol, flavonoid and DPPH (${\alpha},{\alpha}$-diphenyl-${\beta}$-picrylhydrazyl) and ABTS [2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid)] radical scavenging activities were significantly increased with increasing immersion concentration. The Dioscorea bulbifera slices supplemented with 6% pre-soaking oligosaccharide solution treatment showed the highest total sensory score. The results of our study indicated that when pre-soaking oligosaccharide solution is used to immerse the Dioscorea bulbifera slice, it has browning inhibition and antioxidant effect.

• Journal of Oral Medicine and Pain
• /
• v.32 no.4
• /
• pp.347-355
• /
• 2007

The aim of this study was to evaluate the differences of salivary lead (Pb) and cadmium (Cd) concentrations, using ASV analysis, after various pre-treatment procedures. 10 unstimulated whole saliva samples of non-exposed subjects to Pb and Cd were collected. Each sample was divided into 6 aliquots and centrifugation was performed in only 3 aliquots. After centrifugation, 3 different types of pre-treatment procedures were carried out. Also, these pre-treatment procedures were carried out for another 3 aliquots, without centrifugation. Pre-treated aliquots were analyzed electrochemically, by ASV. The results are as follows: 1. Mean concentration of Pb in saliva after centrifugation was significantly higher than that of non-centrifugation. 2. In the detection sensitivity of Pb in saliva, those of simple dilution technique by HCl and acid digestion technique by nitric acid were significantly higher than that of simple dilution technique by electrolyte. 3. Mean concentration of Cd in saliva after centrifugation was significantly higher than that of non-centrifugation. 4. In the detection sensitivity of Cd in saliva, those of simple dilution technique by HCl and acid digestion technique by nitric acid were higher than that of simple dilution technique by electrolyte. But, there were no significant differences between them.

• Journal of Nutrition and Health
• /
• v.26 no.2
• /
• pp.189-195
• /
• 1993

This study conducted to investigate the effect of school lunch prgram on the blood composition of 50 children at the age 11 to 12 years old. Concentration of serum total protein, albumin, zinc and copper were measured at the begining of school lunch program(pre-feeding group) and at the one year later taken school lunch program(post-feeding group). Serum total protein and albumin concentrations in post-feeding group were higher than those in pre-feeding group, but showed no significant difference between groups. While serum zinc and copper concentrations in post-feeding group were significantly lower than those in pre-feeding group. Results indicated that school lunch program effective for improvement of potein nutrition in school children and it is nessessary futher investigation to disease the concentrations of serum zinc and copper in this age.

• Fashion & Textile Research Journal
• /
• v.10 no.5
• /
• pp.779-783
• /
• 2008

The main colorant of Morus alba L. fruit is anthocyanin which is a kind of flavonoid group. In this article, the dyeing properties of colorant extracted from Morus alba L. fruit were investigated on some silk fabrics. The results were as follows: The maximum absorbance of Morus alba L. fruit showed at 284 nm, and 516 nm by UV-VIS spectrophotometer. The dye adsorption increased according as dye concentration. The optimal dyeing temperature was $60^{\circ}C$ and the dye equilibrium was reached 40 minutes after dyeing. The highest K/S value of the colorant obtained at bath ratio 40:1. The effect of pH of dye solution showed higher K/S value at acidic than alkaline condition. Almost Mordants except pre-Fe and Sn did not significantly increased dye adsorption. The pre mordanted silk fabrics showed RP, P, and post mordanted ones showed PB, GY. The color fastnesses to light, washing, and perspiration were modified at pre-Sn mordanted samples.

• Journal of Fashion Business
• /
• v.16 no.4
• /
• pp.100-106
• /
• 2012

This research was carried out to find the mordant effect of Chestnut's inner skin on the cow leather dyed by Turmeric powder. The best proper mordanting conditions were examined by changing mordant method, concentration, temperature, bath ratio, time, and repetition. Also dyeability and surface color changes were evaluated by various mordanting methods. The optimum mordanting conditions of chestnut's inner skin extract on the cow leather were pre mordant, 80%, $50^{\circ}C$, 50:1, 40minutes, 4 repetition. The K/S values as a mordant were higher in pre mordant than post mordanting condition. Although the ${\Delta}E$ was slightly higher in post mordant than pre mordant, it was too small to find any means. The surface colors of all dyed cow leathers were yellow. Among light, dry cleaning, and abrasion fastnesses, only light fastness was increased one degree, others were same degrees.