• 비파괴검사학회지
• /
• 제23권6호
• /
• pp.605-615
• /
• 2003

In practice, it is common to manufacture reference blocks containing simple reflectors to obtain distance-amplitude correction (DAC) curves. However, the construction or DAC curves in this manner requires the use of a large number of specimens with appropriate curvatures and reference reflectors located at various depths. Therefore, less costly and quantitative procedures are strongly needed. To address such a need, in this study, we have developed model-based transfer curves to relate a DAC curve obtained in a particular reference configuration with that for a completely different configuration. An example of transferring DAC curves, using the proposed transfer curves, is given.

• 한국디지털건축인테리어학회논문집
• /
• 제4권2호
• /
• pp.7-14
• /
• 2004

This paper is base on the Thought that digital Architecture and Digital design tools cannot be seperted as like Architevtural Design and Architectural Drafting tools. So the purpose of this paper is to show that the interactive 'Architectural Basic design' practice with Digital tools and there tranning method. This example of the pratical assignments in class("Architectural digital drafting" and "Architectural Basic Design") are focus on tranning spatial perception in real space and digital -cyber space. And these practical samples are using the primary step in The Digital Architectre.

• 대한가정학회지
• /
• 제39권9호
• /
• pp.1-14
• /
• 2001

The purpose of this study was to explore the ideas about childrearing represented on the cuber space. The method used for this study is the content analysis and the data are articles on the Hitel bulletin board during 1 year. It is found that these articles dealt with problems of practices in the pregnancy-delivery, nurturing, teaching and interfacing between home and social institutions. Especially these articles put great emphasis on nurturing. For example, there are many articles about caring, development, health and hygiene of child. And from 1st to 6th month, there are many articles about nurturing. After 7th month, many articles about teaching and interfacing between home and social institutions are appeared. So from these results we might conclude that many functions of the home are transmitted to society too early.

• 한국문헌정보학회지
• /
• 제26권
• /
• pp.75-112
• /
• 1994

The purpose of this study is to investigate the problems concerning 780 music division of DDC. The object is especially arrangement of 780 music in the 20th edition of DDC which is the complete revision. The result is summarized as follows : 1. Although music is an important subject in humanities, especially in arts, it was classified as one division (780) not class. 2. The arrangement of 780 music is severely west-oriented music theory, vocal music and instrumental music. 3. Classification number of 780 music becomes longer because of the limitation of decimal notation. 4. 780 music division of DDC neglects music theory and emphasizes music practicing, especially performance. 5. The assignment of classification number is unbalanced, especially between theory and practice, composition and performance, and among sub-sections of vocal and instrumental music. 6. Many important subject are omitted in DDC music schedule, for example, musicology and branches of musicology, composition and traditional instruments of many countries. 7. Employment of terminology is often improper and inconsistant.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.33-36
• /
• 2007

Acoustic holography exhibits the spatial distribution of sound pressure in time or frequency domain. The obtained picture often contains far more than what we need in practice. For example, when we need to know only the locations and overall propagation pattern of sound sources, a method to show only what we need has to be introduced. One way of obtaining the necessary information is to use envelope in space. The spatial envelope is a spatially slowly-varying amplitude of acoustic waves which contains the information of sources' location. A spatial modulation method has been theoretically developed to get a spatial envelope. By applying the spatial envelope, not only the necessary information is obtained but also computation time is reduced during the process of holography. The spatial envelope is verified as an effective visualization scheme in time domain by being applied to complicated sound fields.

• 품질경영학회지
• /
• 제33권4호
• /
• pp.88-95
• /
• 2005

Multistage screening is a common practice when a component has a critical effect on the function of the assembly. A defect in a component might incur malfunction of an electronic device, resulting in a great amount of loss. Multistage screening, including duplicated screening inspections, may provide a good solution for this problem when inspection errors are present. In the company studied here, the manufacturing process of the multiple layer chip capacitor includes two-stage screening. In the first stage, screening inspection is performed repeatedly until no defects are found in the lot. In the second stage, sampling inspection is performed by a group of experts prior to shipment. In this article, we review the procedure used in the field and suggest a revised model of the multiple screening procedure and solution method for this situation. The usefulness of the proposed model is discussed through a practical example.

• International Journal of Quality Innovation
• /
• 제4권1호
• /
• pp.191-204
• /
• 2003

The target costing technique, mathematically discussed by Sauers, only uses the $C_p index along with Taguchi loss function and $\bar{X}$-P control charts to setup goal control limits. The new specification limits derived from Taguchi loss function is linked through the $C_p value to $\bar{X}$-P control charts to obtain goal control limits. Studies have shown that the point estimator of the $C_p index, $C_p, could vary from time to time due to the sampling error. The suggested approach is to use confidence intervals, especially the lower confidence intervals, to replace the point estimator. Therefore, an improvement on target costing technique is presented by applying the lower confidence interval of the $C_p index and using both Taguchi and Spiring's loss functions together with $\bar{X}$-P charts to make this technique more robust in practice. An example is also provided to illustrate how the improved target costing technique works.

• 한국산업정보학회논문지
• /
• 제2권2호
• /
• pp.159-179
• /
• 1997

Traditionally, the evaluation and selection of suppliers have been a major purchasing function. A growing concern for just in-time purchasing, global sourcing, and long-term partnership between buyers and suppliers makes selecting a righ supplier become more critical decision making process. Consequently, a rigorous and systematic method for evaluation suppliers is a must. However, assessing the values of factors(e.g. qulaity , delivery, and service) selected for evaluating suppliers contains elements of uncertainty. Although several methods have been developed for uncertainty analysis, they may not be proper tools for evaluating suppliers under uncertainty. In this paper, a methodology using a fuzzy-set approach in combination with a multicriterion decision-making (MCDM) technique is developed to use as a tool for evaluating suppliers under uncertainty. An numerical example is presented to demonstrate the method in practice.

• 대한인간공학회지
• /
• 제16권3호
• /
• pp.77-87
• /
• 1997

This paper describes the developement of a Design Issue Management System (DIMS). Although human factors engineering has been recognized as one of the critical activities in the design of man-machine system, it has been hardly successful nor effective in practice to cope with the hyman factors requirements by regulations. For supporting the human factors engineering in nuclear power plants, DIMS ahs three major modules : Design Requirements Data Base, Design Issue Tracking System, Issue Evaluation Support System. These modules function as formal verification architects that the licensing authority requests for verifying the safety of the equip- ment and facilities in nuclear power plants. An example application to an operator support system, named Critical Function Monitoring System, during its independent review of the human factors shows the usage and the benefit of DIMS.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 A
• /
• pp.111-114
• /
• 2003

In this paper, we consider the stabilization and $H_\infty$ control of linear systems with static output feedback control. The static output feedback control represents the simplest closed-loop control that can be realized in practice, and, moreover, it is less expensive to be implemented and is more reliable. In spite of its advantages, it is one of the open problems which is not sloved analytically or numerically yet. After decompose the closed-loop system into feedback form, by adopting the small gain theorem, we obtain a sufficient condition for stabilization and a sufficient condition for It control expressed as linear matrix inequalites. Finally, we show the usefulness of our results by a numerical example.