• Bulletin of the Society of Naval Architects of Korea
• /
• v.25 no.1
• /
• pp.3-10
• /
• 1988

This paper presents some experimental investigations on the effectiveness of the Stern-End-Bulb(SEB) and the design procedure of the optimum one. Experimental method was discussed to search the optimum SEB and the resistance reduction rate was investigated from the resistance test results of the SEB series for a passenger boat and a container ship. The contribution of SEB on the propulsive coefficients was discussed from the self-propulsion test results for a container ship. It would be expected that the power saving rate is about 5.8 percents for a passenger boat and 3.6 percents for a container ship by optimum SEB, respectively.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.4 no.3
• /
• pp.103-111
• /
• 2009

Software update has been regarded as one of fundamental functions in wireless sensor networks. It can disseminate a delta-image between a current software image operating on a sensor node and its new image in order to reduce an update image(transmission data) size, resultantly saving energy. In addition, code-banking capability of micro-controllers can decrease the update image size. In order to maximize the efficiency of the software update, the proposed scheme exploits both the delta-image and the code-banking at the same time. Besides, it additionally delivers a recovery delta-image to properly handle abnormal conditions, such as message corruptions and unexpected power-off during the update.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.37 no.1
• /
• pp.33-40
• /
• 2014

Air compressor is an important facility with electric power in the industry. However, because of the noise and vibration of air compressor and is installed outside the building management difficulty. In this study, MCP (Micro Control Processor) to remote monitoring of the air compressor via the compressed air through improved quality and allows stable maintenance were designed. So, increase the productivity improvement of energy-saving effect can be obtained. Remote real-time information stored on your PC to manage air compressor equipment was higher reliability. Monitoring system is developed in this study was applied to embedded systems. It is easy to install air compressor, and low maintenance costs was to raise the economic impact.

• Journal of the Society of Naval Architects of Korea
• /
• v.47 no.6
• /
• pp.787-791
• /
• 2010

This paper describes the performance of small waterjet propulsion system and show the influence of performance for nozzle shape and area. The installed engine sets a limit on maximum power in below 1800 rpm for fuel saving. Our designated target is reached by redesign of the impeller considering engine characteristics and extention of nozzle pararell part. The results of the full-scale ships are compared with thoes of the model test. In the future, those experimental data will be applied to the relation study between engine characteristics and powering performance prediction.

• Proceedings of the KIEE Conference
• /
• 2001.10a
• /
• pp.205-207
• /
• 2001

In response to this inverter microwave oven has been developed to improve high speed cooking time & energy saving performance. The voltage resonating inverter has a defect in switching element that works at 5 or 6times higher than input voltage. Especially, it is very difficult to choose the switching device is very high for the 220 (V) commercial voltage. In this paper, it is proposed the optimum method to realize the turbo 1200(W) output power for microwave oven that is employed the 900(V) IGBT with decreasing operating voltage of the switching component by making the 220(V), 1000(W) inverter through the active clamp voltage resonating inverter.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2004.05a
• /
• pp.160-162
• /
• 2004

The aim of this study is to make the technical standards for certificating a high efficiency metal-halide lamps and reflectors using the high intensity discharge lamps, to accomplish the practical energy saving effect. Metal-halide lamps are certificated by stabilzed and restarting time, lamp voltage, current, power and light output efficiency. The high illumination reflectors using HID lamps are certificated by testing reflective index, fading, the melting point, glare and install spacing factor.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.10
• /
• pp.114-122
• /
• 2010

Today, effort to reduce greenhouse gas emissions is to be strengthened worldwide. And environment-friendly vehicle is being magnified because of energy saving and minimization of environmental pollution. In the future, the construction of EV charging facilities will be needed for Prevalence of EV in the Public Housing. So in this paper, we survey and analyze data of power usage and owned vehicles on the existing public housing according to season, day and time. And, we reviewed appropriate configuration ratio according to three kind of case. Besides, we calculate Prevalence Estimates of EV and utilization factor based on analysis result. And finally, we try to study for case model.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.11
• /
• pp.17-22
• /
• 2010

This paper presents a unique method for simulating permanent magnet motors without time-consuming numerical methods used in the conventional magnetic circuit method. The conventional method gives us average values like torque and power over specified periods of time, but it is usually very difficult and time-consuming to obtain instantaneous characteristics like cogging torques and torque ripples. The convolution operations method we present, however, considers relative angle variations of stator magnetic circuits and rotor magnetic circuits. As a result, it makes uses of instantaneous values possible. The authors compare the new method with the coventional method and verify that calculating cogging torque values and back-emf values is possible with the proposed new convolution method.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.1288-1290
• /
• 2004

Fluorescent lamp ballast using piezoelectric transformer were fabricated and its characteristic was investigated. Traditional electronic ballast is composed of basic blocks, which are composed of rectifier, power factor corrector and resonant inverter fluorescent lamp. The proposed electronic ballast has several advantages accordingly, traditional ballast was replaced fabricated electronic ballast using piezo electronic transformer and VCO oscillated, because of its lighter weight, high efficiency and saving energy.

• Proceedings of the KIEE Conference
• /
• 2004.11a
• /
• pp.306-309
• /
• 2004

Recently, the environmental problem has received considerable attention. so, many lamps have been developing for environmental requirement and energy efficiency. also, at glow discharge lamp researchers try to reduce energy spending that is power saving lamp. this kind requirement agree with strong points of electrodeless fluorescent lamp has received to now lighting sauce. At low pressure as mTorr I.C.P make high density plasma easily, is good to maintain discharge, has high ionization and does not have failing lighting and losing ability of electron radiation by oxidation and volatilization of electrodes, because this tape does not have electrodes. This point of I.C.P can use at electrodeless fluorescent lamp in this study ICP display elements and Ar, Ne, Kr are researched for optical characteristic. each gas is looked into optical characteristic, also mixed gases is experiment for optical characteristic.