• Solar Energy
• /
• v.16 no.2
• /
• pp.15-37
• /
• 1996

Most of the world's energy demand is met by fossil fuels, mainly petroleum and natural gas. Even though their production is not keeping up with the demand, there are many options before us-solar energy in its direct and indirect forms, nuclear breeders, thermonuclear power, geothermal energy, synthetic fluid fuels, and hydrogen as energy carrier to complement the nonfossil energy sources. But, before these energy alternatives can be utilized, in most cases, it is necessary to conduct extensive research and development work. In order to solve global energy and environmental issues, it is very important to develop and install energy supply systems which utilizes natural energy. The installation of these systems brings the following merits from the viewpoints of energy saving or environmental protection-(a) the positive use of natural energy reduces fossil fuel consumption; and (b) it also prevents environmental degradation. In this paper, the types of natural energy considered is confined to the solar, wind, hydraulic, geothermal and ocean-wave energy. And, the objective of the paper is to describe the state of the art of natural energy and future utilization prospect of them.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.109.2-109.2
• /
• 2012

연구에서는 co-sputtering 시스템을 이용하여 아나타세 $TiO_2$의 도핑 농도 변화에 따른 다성분계 $TiO_2$-ITO (TITO) 박막의 전기적, 광학적, 구조적 특성 변화를 알아보고 고 효율을 가지는 인광 유기발광 다이오드를 제작 하였다. 상온에서 최적화된 다성분계 TITO 투명 전극의 급속 열처리 시 $600^{\circ}C$ 급속 열처리 조건에서 매우 낮은 18.06 ohm/sq.면저항, $5.1{\times}10^{-4}$ ohm-cm 비저항과 가시광선 영역 400~550 nm 에서 87.96 %이상의 높은 광학적 투과율과 4.71 eV의 일함수를 확보할 수 있었다. 또한TITO 박막을 양극으로 하여 OLED 소자를 제작한 후 그 성능을 평가하였다. 기존의 ITO 전극과 비교하면 다성분계 TITO 인광 유기 발광 다이오드의 quantum efficiencies (21.69 %)와 power efficiencies (90.92 lm/W)로 ITO 투명전극과 매우 유사함을 알 수 있었고 아나타세 $TiO_2$가 도핑된 TITO 투명 전극의 급속 열처리 공정에도 불구하고 매우 평탄한 표면을 나타냄을 SEM 이미지를 통하여 확인할 수 있었다. 이러한 TITO 투명 전극의 우수한 전기적, 광학적, 구조적 특성은 indium saving 투명 전극으로써 고가의 ITO 박막의 대치가능성을 나타낸다.

• Journal of the Korean Solar Energy Society
• /
• v.31 no.5
• /
• pp.99-104
• /
• 2011

It has to take quantitative energy usage of high school education facilities in nations to set goals of their energy reduction. Therefore, The purpose of this study is to present various analysis result of energy consumption that is a statistic alanalysis of high school education facilities in Korea to set the goal of energy saving. This study has enforced analysis and has provided used energy for the year 2008 and general information from 2022 high school education facilities in 16 cities in South Korea by the relevant agency. Used energy sources in high school education facilities are electricity, gas for heating, oil, coal, water, and this study has changed the various used energy sources as unit 'kWh' only for comparison and analysis them.

• Journal of the Semiconductor & Display Technology
• /
• v.19 no.1
• /
• pp.42-48
• /
• 2020

As global warming accelerates, eco-friendly electric cars are being developed to reduce carbon dioxide emissions, and power conversion inverters are used to drive motors. Among inverter components, DC-link capacitor is heated by high current usage, which causes problems such as performance and life-saving of inverter. Although metal cases with good thermal performance have been used to solve this problem, it is difficult to apply them in practice due to insulation problems with other parts. In this paper, the Heat-Generation influence factor of DC-link capacitor is analyzed. Variables on heat-generation are set at 3 levels for film width, inductance, and film thickness. Box-Behnken to 13 tests using the design and minimal deviations, e.g. through the experiment three times by each level. The surface of the film k type by attaching the sensor current is measured temperature. Capacitance was set to a minimum level of 200 ㎌ and had a frequency of 16 kHz with Worst case, ambient temperature of 85℃ and a ripple current of 50 Ams was applied. The temperature at the measurement point was collected in the data logger after sampling at 1 minute intervals for 2 hours after saturation with the ambient temperature. This experiment confirmed that setup factors are correlated with heat-generation.

• Journal of Drive and Control
• /
• v.15 no.3
• /
• pp.49-56
• /
• 2018

Construction machinery is used to improve productivity in civil engineering work and construction work, and it is a lengthy operation, and consumes considerable fuel to cope with large loads. As a result, productivity and fuel consumption of the construction machine become the main deciding factors. In the hydraulic system of the excavator, the main control valve is the most critical position for control. The flow distribution for control performance is achieved by the metering orifice, that causes critical energy loss. To improve this, we propose a combination of a three port proportional pressure reducing valve and a poppet type flow control valve as an IMV to replace the existing spool type MCV. To validate the proposal, we analyze static characteristics by modeling mathematically, and analyze dynamic characteristics. Simulation using the AMESim software on the regeneration circuit of the boom cylinder up-down operation, verifies the energy-saving effect compared to the existing MCV when IMV is used.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.3
• /
• pp.219-224
• /
• 2015

Today, High Social demand for Energy Saving. This have been Studied for the purpose, Having an Efficiency of much it, in IGBT DIMMER SYSTEM compared to the existing SSR,SCR Dimmer System. The Method Two, The First is Dimming in Dimmer System How much Power loss Appears of A Comparison Experiment According to the output a SINEWAVE Strain, Comparative Measurements Experimental were Conducted with Oscilloscope. Second, When Dimming the sound has equipment by measuring the relative Size Decibel Experiment was conducted in Decibel Meter about the Equipment Noise. Results Thus Confirm SSR, SCR Dimmer IGBT SINEWAVE Dimmer more Efficiently.

• Journal of Drive and Control
• /
• v.15 no.2
• /
• pp.46-51
• /
• 2018

Many research studies have been carried out related to saving energy and environmental pollution in the field of construction machinery. The best solution for reducing the related environmental pollution is to reduce fuel consumption by upgrading the energy efficiency of machinery used in this field. An efficiency upgrade in the field of construction machinery would mean minimizing the pressure loss in hydraulic pipe lines or achieving optimal operating conditions while responding to a load. One way to achieve this is to make an equivalent circuit, like an electrohydrostatic actuator, or to improve the spool type valve using the 4/3 way method. This study deals with an electrohydraulic proportional flow control valve. SimulationX software is used as a simulation tool for analyzing the dynamic characteristics. The analysis results, including the performance and characteristics of design parameters, are discussed and the validity of the theoretical analysis is also evaluated.

• Proceedings of the KIPE Conference
• /
• 2013.07a
• /
• pp.126-127
• /
• 2013

In industry, Supervisory Control and Data Acquisition (SCADA) system plays critical role to ensure production is monitored and controlled rigorously and in timely manner. Having a cost saving yet still effective SCADA system would be much desired by Industry. SCADA itself is a field with constant development and research like how this paper investigates on creating an extremely low cost device, which can be adapted to many different SCADA applications through some very basic programming when combined with relevant peripherals. Much of the process in some expensive SCADA application based on smartphone application is due to specialized communication infrastructure. This paper addresses the needs by developing low cost and integrated wireless SCADA system. The system features capability on accessing the performance of remotely situated device parameter, such as temperature, control analog or digital input output on real time basis. We use existing mobile network capability through Bluetooth communication channel.

• Electrical & Electronic Materials
• /
• v.9 no.10
• /
• pp.1027-1032
• /
• 1996

The auto-illumination controller for office, residence, and so on was studied. The system consists of parts of a power supply, a signal oscillator, a lamp controller and two kinds of sensor. The lamp controller has two thyristors triggered by the IR sensor(SCRI) and CdS sensor(SCR2) respectively, When the illuminance around this system is higher than operating value of its sensor, lamp is turned off automatically. Otherwise, the light of lamp gets dim by CdS sensor. In case IR sensor senses the body heat of people around itself, the illuminance of the lamp gets maximum. The illuminance of the lamp can be changed dimmly by control of the variable resistor (RV) connected with SCR2 in series. The turning - on time of the lamp can be also controlled using a variable resistor(Rt) connected with a signal oscillator in parallel. Changing resistance Rt changes the time constant(.tau.), which triggers the gate of SCR2. Though people left the surrounding of lamp, the lamp keeps light for a while.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.6
• /
• pp.952-958
• /
• 2009

The International Maritime Organization (IMO) has adopted the ballast water management convention at a diplomatic conference in early 2004 that all ships should be equipped with a treatment system from 2010 gradually. In this paper, the disinfection characteristic of ultra-violet (UV) rays was studied and a ballast water treatment system (BWTS) which can treat $50m^3$/h sea water was manufactured. The system consists of a disinfection chamber with six 3.5 kW UV lamps which are operated by magnetic ballasts, a programmable logic controller (PLC) and set of pipe lines. The biological disinfection efficacy of the prototype BWTS was evaluated following the IMO rules using zooplankton such as Artemia and Rotifer species for the size over $50{\mu}m$, and phytoplankton such as Tetraselmis and Thalassiosira species for the size between 10 to $50{\mu}m$. From the experimental results, the disinfection efficacy was 99.99 % that meets the IMO requirement. However, more studies on an energy saving system are needed because the consumption power of the prototype system is as high as over 21 kWh for $50m^3$/h.