• 한국생물공학회:학술대회논문집
• /
• 2003.04a
• /
• pp.611-614
• /
• 2003

The rheological properties of exopolysaccharide, p-KG03, produced by marine microalgae Gyrodinium impudicum strain KG03 had been studied. The intrinsic viscosity of this p-KG03 was calculated to 65.22 and 50.75 $d{\ell}/g$ using Huggins and Kramer equations (xanthan gum 24.41 and 24.03). Aqueous dispersions at p-KG03 concentrations ranging from 0.1 to 1.0 % (w/w) showed marked shear-thinning properties as Power-Law behavior. In aqueous dispersions of p-KG03 1.0 %, consistency index (K) and flow behavior index (n) were 2,172 and 0.52. The apparent viscosity and the influence of shear rate on different conditions as p-KG03 concentrations, pH, NaCl, $CaCl_2$ and temperature in aqueous solutions were measured. And p-KG03 had mixed with aqueous solutions of xanthan gum and gellan gum, and invested the change of mixed aqueous solution behavior.

• Journal of Power Electronics
• /
• v.11 no.2
• /
• pp.163-172
• /
• 2011

Oxidation models of a rotor bar and end ring segment in an induction motor are presented to simulate the behavior of an induction machine working with oxidized rotor parts which are modeled as rotor faults in progress. The leakage inductance and resistance of the rotor parts arc different from normal values because of the oxidation process. The impedance variations modify the current density and magnetic flux which pass through the oxidized parts. Consequently, it causes the rotor asymmetry which induces abnormal harmonics in the stator current spectra of the faulty machine. The leakage inductances of the oxidation models are derived by the Ampere's law. Using the proposed oxidation models, the rotor bar and end ring faults in progress can be modeled and simulated with the motor current signature analysis (MCSA). In addition, the oxidation process of the rotor bar and end ring segment can motivate the rotor asymmetry, which is induced by electromagnetic imbalances, and it is one of the major motor faults. Results of simulations and experiments are compared to each other to verify the accuracy of the proposed models. Experiments are achieved using 3.7 kW, 3-phase, and squirrel cage induction motors with a motor drive inverter.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.20 no.2
• /
• pp.175-181
• /
• 2015

In this study, a lithium polymer battery (LiPB) is simply expressed by a primary RC equivalent model. The PI state observer is designed in Matlab/Simulink. The non-linear relationship with the OCV-SOC is represented to be linearized with 0.1 pu intervals by using battery parameters obtained by constant-current pulse discharge. A state equation is configured based on battery parameters. The state equation, which applied Peukert's law, can estimate SOC more accurately. SOC estimation capability was analyzed by utilizing reduced Federal Test Procedure (FTP-72) current profile and using a bi-directional DC-DC converter at temperature ($25^{\circ}C$). The PI state observer, which is designed in this study, indicated a SOC estimation error rate of ${\pm}2%$ in any of the initial SOC states. The PI state observer confirms a strong SOC estimation performance despite disturbances, such as modeling errors and noise.

• Preventive Nutrition and Food Science
• /
• v.13 no.3
• /
• pp.249-252
• /
• 2008

Flow behaviors of sweet potato starch (SPS) pastes (5% w/w) were studied in the presence of various sugars (xylose, glucose, fructose and sucrose) and sugar alcohols (xylitol and sorbitol). The flow properties of SPS-sugar mixtures were determined from the rheological parameters of power law model. The vane method was also employed for determining yield stresses of SPS-sugar mixtures directly under a controlled low shear rate. At $25^{\circ}C$ all the samples showed shear-thinning behaviors ($n=0.35{\sim}0.44$) with yield stress. The consistency index (K) values of SPS-sugar mixtures increased in the following order: sorbitol> xylitol> control (no sugar)> sucrose> fructose> glucose> xylose, showing that the addition of sugar alcohols enhanced the K values. The yield stress values were reduced in the presence of ugars and sugar alcohols and they also increased with an increase in swelling power of starch granules in the SPS-sugar mixture systems.

• Geomechanics and Engineering
• /
• v.24 no.6
• /
• pp.545-557
• /
• 2021

Since the functionally graded materials (FGMs) are used extensively as thermal barriers in many of applications. Therefore, the current article focuses on studying and presenting dynamic responses of multilayer functionally graded (FG) deep beams placed in a thermal environment that is not addressed elsewhere. The material properties of each layer are proposed to be temperature-dependent and vary continuously through the height direction based on the Power-Law function. The deep layered beam is exposed to harmonic sinusoidal load and temperature rising. In the modelling of the multilayered FG deep beam, the two-dimensional (2D) plane stress continuum model is used. Equations of motion of deep composite beam with the associated boundary conditions are presented. In the frame of finite element method (FEM), the 2D twelve-node plane element is exploited to discretize the space domain through the length-thickness plane of the beam. In the solution of the dynamic problem, Newmark average acceleration method is used to solve the time domain incrementally. The developed procedure is verified and compared, and an excellent agreement is observed. In numerical examples, effects of graduation parameter, geometrical dimension and stacking sequence of layers on the time response of deep multilayer FG beams are investigated with temperature effects.

• Steel and Composite Structures
• /
• v.41 no.6
• /
• pp.787-803
• /
• 2021

The size-dependent nonlinear thermomechanical vibration analysis of pre- and post-buckled tapered two-directional functionally graded (2D-FG) microbeams is presented in this study. In the context of the modified couple stress theory, the formulations are derived based on the parabolic shear deformation beam theory and von Karman nonlinear strains. Different thermomechanical material properties are assumed to be temperature-dependent and smoothly vary in both length and thickness directions using the power law and the physical neutral axis concept is employed. The nonlinear governing equations are derived using the Hamilton principle and the resulting variable coefficient equations of motion are solved using the differential quadrature method (DQM) and iterative Newton's method for clamped-clamped and simply supported boundary conditions. Comparison studies are presented to validate the derived model and solution procedure. The impacts of induced thermal moments, temperature power index, two gradient indices, nonuniform cross-section, and microstructure length scale parameter on the frequency-temperature configurations are explored for both clamped and simply supported microbeams.

• Structural Engineering and Mechanics
• /
• v.84 no.6
• /
• pp.813-822
• /
• 2022

In this article, the buckling and free vibration of multi-directional FGM sandwich plates are investigated. The material properties of FGM sandwich plates are assumed to be varying continuously in the in the longitudinal, transverse and thickness directions. The material properties are evaluated based on Voigt's micro-mechanical model considering power law distribution method with arbitrary power index. Equations of motion for the buckling and vibration analysis of multi-directional FGM sandwich plate are obtained based on refined shear deformation theory. Analytical solution for simply supported multidirectional FGM sandwich plate is carried out using Navier's solution technique. The FGM sandwich plate considered in this work has a homogeneous ceramic core and two functionally graded face sheets. Influence of volume fraction index in the longitudinal, transverse and thickness direction, layer thickness, and geometrical parameter over natural frequency and critical buckling load of multi-directional FGM sandwich plate is investigated. The finding shows a multi-directional functionally graded structures perform better compared to uni-directional gradation. Hence, critical grading parameters have been identified which will guide researchers in selecting fabrication routes for improving the performance of such structures.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.10a
• /
• pp.234-237
• /
• 2008

It was reported that the semi-solid forming process has many advantages over the conventional forming process, such as a long die life, good mechanical properties and energy savings. It is very important, however, to control liquid segregation to gain mechanical property improvement of materials. During forming process, Rheology material has complex characteristics, thixotropic behavior. Also, difference of velocity between solid and liquid in the semi-solid state material makes a liquid segregation and specific stress variation. Therefore, it is difficult for a numerical simulation of the rheology Process to be Performed. General Plastic or fluid dynamic analysis is not suitable for the behavior of rheology material. The behavior and stress of solid particle in the rheology material during forging process is affected by viscosity, temperature and solid fraction. In this study, compression experiments of aluminum alloy were performed under each other tool shape. In addition, the dynamics behavior compare with Okano equation to Power law model which is viscosity equation.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 1996.11a
• /
• pp.5-9
• /
• 1996

In foreign country such as U.S.A and Japan, considerable research has been done regarding the spread of smoke in room of fire involvement by using computer. But, in our country it has not been. So, this paper presents a detailed qualitative description of phenomena which occures during typical fire scenarios through numerical analysis. This research, in the view of field model, is focused on finding out the smoke movement and temperature distribution. And it is planned to analyze governing equation including smoke diffusion equation by numerical analysis with finite volume method and non-staggered grid system. The SIMPLE method for pressure-velocity couple and power-law scheme for convection terms are used. It shows that a plume is formed, hot plume is formed, hot plume gases impinge on the ceiling and they spread across it. then, it eventually reaches the bounding walls of the enclosure. It takes 60s for smoke to fill the enclosure.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.3
• /
• pp.816-824
• /
• 1996

The densification behaviors of copper powder under high temperature processing were investigated. Experimental data were obtained for copper powder under hot isostatic pressing, hot pressing and uniaxial compression. Finite element calculations from the constitutive models by McMeeking and co-workers were compared with the experimental data, The agreements between experimental data and theoretical calculations are reasonably good when hydrostatic stress is dominant, but not as good then deviatoric stress increases.