• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2000년도 전력전자학술대회 논문집
• /
• pp.355-359
• /
• 2000

This paper deal with the harmonic reduction technique in three-phase square-wave inverter system formed by single-phase inverter. To reduce the harmonics six single-phase inverters are used for forming multi-phase inverter and zig-zag connected output transformer for eliminating the harmonic 6(2k-1)$\pm$1 orders. And an ac filter is furnished at output side. Computer simulations show that the THD of the output voltage can be reduced immensely.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권8호
• /
• pp.3918-3934
• /
• 2017

This paper presents a viewport resolution scaling technique to reduce power consumption in mobile graphic processing units (GPUs). This technique controls the rendering resolution of applications in proportion to the resolution factor. In the mobile environment, it is essential to find an effective resolution factor to achieve low power consumption because both the resolution and power consumption of a GPU are in mutual trade-off. This paper presents a resolution factor that can minimize image quality degradation and gain power reduction. For this purpose, software and hardware viewport resolution scaling techniques are applied in the Android environment. Then, the correlation between image quality and power consumption is analyzed according to the resolution factor by conducting a benchmark analysis in the real commercial environment. Experimental results show that the power consumption decreased by 36.96% on average by the hardware viewport resolution scaling technique.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.1018-1019
• /
• 2015

Recently, standby power reduction techniques of AC/DC adaptor were developed, consuming power almost arrived to 300mW level. The standby power losses are composed of the input filter loss 11.8mW, the control IC for AC/DC adaptor 18mW, the switching loss 9.53mW and the feedback loss 123mW. And there are the standby power reduction techniques. In this paper, in order to reduce the standby power of SMPS more, the loss due to a voltage difference between input and output is reduced by the control circuit which is composed of the low voltage driving circuit and voltage regulator. The low voltage driving circuit operates on the low voltage of input and off the high voltage. The low voltage driving IC was produced by the $1.0{\mu}m$, high voltage DMOS process.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 추계학술대회 논문집 전력기술부문
• /
• pp.342-344
• /
• 2006

The modem enormous electric power system has made power system analysis much more complex and difficult. For effective analysis of the power system, model reduction and aggregation is required. In this paper, a new aggregation method is presented to aggregate the coherent generators in the large scale power system while matching the power flow. In order to demonstrate the effects of this aggregation method, it is applied to a small scale power system. A multi-variable control technique of $H_{\infty}$ control is also applied to enhance the dynamic stability of the aggregated power system.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2009년도 추계학술대회
• /
• pp.160-163
• /
• 2009

HPA(High Power Amplifier)는 무선통신 시스템에서 필수적으로 요구되는 요소 중의 하나다. 그러나 전력 증폭기는 비선형 특성을 가지고 있으며 신호의 비선형 왜곡을 유발 시키고 인접채널 간섭을 심화시켜 시스템의 효율을 떨어뜨린다. 이러한 문제점을 해결하기 위해 많은 선형화 기법들이 제시되어왔다. 다항식 사전왜곡 기법은 증폭기로 입력되는 신호가 미리 증폭기의 역 특성을 갖도록 하는 기법으로 다항식을 통하여 증폭기를 모델링하기 때문에 수렴 속도가 빠르고 다른 기법들에 비해 좋은 성능을 보인다. 하지만 다항식으로 역 비선형 특성을 구할 경우, 증폭기의 포화영역에서 역 비선형 특성이 거의 무한대가 되어야 하기 때문에 선형화기의 성능이 크게 떨어진다. 본 논문에서는 이러한 문제점을 해결하기 위하여 PAPR(Peak-to-Average Power Ratio) 기법을 적용하여 다항식 사전왜곡 기법의 성능을 향상 시켰다.

• 전력전자학회논문지
• /
• 제26권5호
• /
• pp.342-348
• /
• 2021

The PV module of solar power systems requires maximum power point tracking (MPPT) technique because the power-voltage and current-voltage characteristics vary depending on the surrounding environment. In addition, the 120 Hz ripple voltage on the DC-Link is caused by the imbalance of the system voltage and current. The effect of this 120 Hz ripple voltage reduces the efficiency of the power generation system by increasing the output current distortion rate. Increasing the capacity of DC-Link can reduce the 120 Hz ripple voltage, but this method is inefficient in price and size. We propose a technique that detects 120 Hz ripple voltage and reduces the effect of ripple voltage without increasing the DC-Link capacity through a controller. The proposed technique was verified through simulations and experiments using a 1 kW single-phase solar power system. In addition, the proposed technique's feasibility was demonstrated by reducing the distortion rate of the output current.

• ETRI Journal
• /
• 제45권4호
• /
• pp.650-665
• /
• 2023

A novel smart metering technique capable of anomaly detection was proposed for real-time home power management system. Smart meter data generated in real-time were obtained from 900 households of single apartments. To detect outliers and missing values in smart meter data, a deep learning model, the autoencoder, consisting of a graph convolutional network and bidirectional long short-term memory network, was applied to the smart metering technique. Power management based on the smart metering technique was executed by multi-objective optimization in the presence of a battery storage system and an electric vehicle. The results of the power management employing the proposed smart metering technique indicate a reduction in electricity cost and amount of power supplied by the grid compared to the results of power management without anomaly detection.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 추계종합학술대회 논문집
• /
• pp.1081-1084
• /
• 1998

In this paper, we propose the bus coding technique for low power consumption. For CMOS circuit most power is dissipated as dynamic power for charging and discharging node capacitances.Though the I/O and bus are likely to have the very large capacitances associated with them and dissipate much of the power dissipated by an IC, they have little beenthe special target for power reduction. The conventional Bus-Invert coding method can't decrease the peak power dissipation by 50% because the additional invert signal line can invoke a transition at the time when Bus-Invert coding isn't used to code original bus data. The proposed technique always constraints the Hamming distance between data transferred sequentially to be below the half of the bus width, and thus decrease the I/O peak power dissipation and the I/O average power dissipation.

• 한국통신학회논문지
• /
• 제35권4C호
• /
• pp.401-407
• /
• 2010

본 논문은 OFDM (orthogonal frequency division multiplexing) 시스템에서 PAPR (peak-to-average power ratio) 감소 기법으로 복잡도가 낮은 컴팬딩 (companding) 기법을 고려한다. 기존의 컴팬딩 함수는 시스템 요구 사항에 따라 설계하기 어렵고 비트오류율 성능 열화가 매우 큰 단점이 있다. 이에 본 논문에서는 임의의 최대 PAPR 값을 제공하고 그에 따라 비트오류율 성능이 점진적으로 바뀌는 스케일러블 컴팬딩 함수를 제안한다. 제안하는 컴팬딩 함수는 시스템이 요구하는 PAPR 성능과 비트오류율 성능에 따라 쉽게 설계할 수 있으며, 모의실험 결과 같은 PAPR 조건에서 기존의 클리핑이나 $\mu$-low 기법보다 우수한 비트오류율 성능을 제공함을 볼 수 있다.

• 가정과삶의질연구
• /
• 제27권4호
• /
• pp.141-160
• /
• 2009

Recently, some policies for reducing standby power, which has quite an effect on electricity consumption, have been employed all over the world. This study surveys the present condition of standby power for major electric home appliances during three years and analyzes the result of technical development reducing standby power. It presents how the industry paid attention to applying the technique of reducing standby power to electric appliances and how it affects the product's energy efficiency. We survey the standby power's change for six items, which were selected from the major electric appliances available on the market. It analyzes the difference of standby power consumption between appliances with a standby power reducing technique and those without during the latest three years. The amount of the average standby power is also compared. The comparison data confirms that the industry's effort and application of reducing standby power contribution has contributed to increasing an appliance's energy efficiency. This study restricted the analyzed items to six appliances, which has been a low volunteered involvement in the standby power reducing program. It is important for reducing standby power consumption of appliances because it contributes to saving electric energy at home and abroad. The development of the standby power reducing technique is needed for more appliances. Along with the development of the standby power reducing technique in the industrial field, it also necessary for consumers to enlarge their understanding of standby power reduction for economic, social, and environmental values.