• Journal of Hydrogen and New Energy
• /
• v.11 no.4
• /
• pp.149-159
• /
• 2000

This paper is concerned with the performence of a steam reformer for 25kW class MCFC, which is compared with the theoretically calculated results at various operating conditions. The theoretical $H_2$ production amount and $CH_4$ conversion rate are calculated with variations of temperature and steam/carbon (S/C) ratio using fortran program, and the actual values are measured from flowmeter and gas chromatography. As a result of the comparison of theoretical and actual values, the theoretical $H_2$ production amount is calculated by $24.4m^3/hr$ at the normal operating condition(LNG $9m^3/hr$, S/C ratio 5, absolute pressure $2.77kg/cm^2$, $610^{\circ}C$), but the actual production amount is only $19.4m^3/hr$, which is 79.5% of the theoretical value. Nevertheless, at the normal operating condition, the reformer for 25kW class MCFC performed well for a 2,100 hr long run operation, constantly producing $H_2$.

• Journal of Korean Society of Water and Wastewater
• /
• v.20 no.2
• /
• pp.225-234
• /
• 2006

Characteristics of electricity production from major fermentation products (acetate, propionate and butyrate) were evaluated in a microbial fuel cell (MFC). For each substrate, batch and continuous experiments were performed. The batch test result indicated that coulombic efficiency depended on the resistance connected in MFC circuit. With acetate, coulombic efficiency were 87% at $20{\Omega}$, but decreaced to 45% at$220{\Omega}$. In continuous tests, maximum power densities obtained was 220 Q with acetate. The maximum power densities of butyrate, acetate and propionate were 6.8, 6.1, and $5.2mW/m^2$, respectively. Propionate and butyrate were converted into acetate producing high currents. $H_2$ produced during butyrate and propionate probably used to produce electricity. In conclusion, butyrate conversion into acetate was faster than that of propionate with higher electricity production. If the production of propionate is inhibited during fermentation, anaerobically fermented liguor may be effectively applied for MFC.

• Environmental and Resource Economics Review
• /
• v.32 no.2
• /
• pp.127-147
• /
• 2023

This study is trying to analyze the economic effect of replacing thermal power generation, one of the government's carbon-neutral policies, with new and renewable energy. For this analysis, scenario A is set to replace 100% of thermal power generation with new and renewable energy, and scenario B is set to replace 60% of thermal power generation with new and renewable energy. In addition, costs are incurred when replacing thermal power generation with new and renewable energy, and scenario 1 is the same cost as the current cost, and scenario 2 is120% higher than the current cost. Therefore, when converting thermal power generation to new and renewable energy, the scenarios are largely organized into four cases. In the case of replacing thermal power generation with new and renewable energy, the production inducement coefficient of thermal power generation decreased from the current level regardless of the scenario. However, the value-added inducement coefficient and the greenhouse gas emission inducement coefficient are lower than the current level when thermal power is converted to renewable energy by 100%, while the value-added inducement coefficient and greenhouse gas emission inducement coefficient are higher than the current level. In addition, the greenhouse gas emission induction coefficient of most industries was found to decrease, while the production induction coefficient and the value-added induction coefficient increased. Scenario A seems appropriate because the purpose of the government's policy is to reduce greenhouse gas emissions by converting thermal power into new and renewable energy. However, as a result of this, the production inducement coefficient and value-added inducement coefficient of some industries decrease, so the government's support policy is needed to solve this problem

• International Journal of Quality Innovation
• /
• v.8 no.2
• /
• pp.32-56
• /
• 2007

Life Cycle Assessment (LCA) aims to analyze possible impact upon manufacturing process and availability of products, and also study the environmental considerations and potential influence during entire life cycle ranging from procurement, production and utilization to treatment (namely, from cradle to tomb). Based on high-density polyethylene (HDPE) pipe manufacturing of company A, this case study would involve evaluation of environmental influence during the production process. When the manufacturing process has been improved during "production process" and "forming cooling" stage, it is found that capital input on "electric power" and "water supply" could be reduced, thus helping to sharpen the competitive power of company A, and also ensure sustainable economic and industrial development in accordance with national policies on environmental protection.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10b
• /
• pp.318-323
• /
• 1992

The improvement of the production capability of multi PCB assembly line can not be simply done by improving the capacities of each assembly robot cells but must be done by controlling the production line effectively with the line host computer which controls over the whole assembly line. A real time production control, a real time model change and a real time trouble shooting compose the specific concepts of this technique. In this paper, we present and analyze the definition and application method of real time assembly concept. The meaning of real time model change, troubles and error sooting and its algorithm will be introduced. Also, the function of the host computer which is in charge of all of many different tasks mentioned above and the method are presented. The improvement of the productivity is mainly focused on the efficiency of multi-PCB production control. The importance of this aspect is gradually increasing, which we have presented the analysis and the solution.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.21 no.2
• /
• pp.295-301
• /
• 2023

To broaden the utilization of nuclear energy, uranium as a fuel should be mined indispensably. Mining accounts for the largest portion of the cost of producing the uranium assembly. Therefore, this study analyzes the trends of uranium prices, which have a significant impacts on the mining cost. Uranium production contributing to the price fluctuations is explained in five periods from 1945 to the present. Moreover, the series of events affecting uranium prices from the 1970s until the present are verified. Among them, the most recent incidents considered in this study are the following: COVID-19 pandemic, Kazakhstan unrest, and Russia-Ukraine war. European countries have started to reconsider the transition to nuclear power to reduce their dependence on Russian oil and gas, which has contributed to the surge in uranium prices. Based on the results of this study, various international issues have been closely associated with the nuclear power industry and uranium, affecting the production of uranium and its price.

• The Journal of Fisheries Business Administration
• /
• v.38 no.1 s.73
• /
• pp.71-96
• /
• 2007

This study is aimed to investigate how the structure of Korean and Chinese fisheries has been changed since the Fisheries Agreement between Korea and China came into effect. This investigation was accomplished from a comparative point of view by using statistic data in the literatures published by both Korea and China. Results of this study are summarized as follows; First, it was revealed that the decreasing rate of fish production of marine capture fisheries in Korea was lowered more by 5.1%, while it was decreased by only 0.1% in China. Second, comparative results on changes in production of offshore fisheries showed that the production of Korean offshore fisheries in 2003 was reduced by 26% compared to that in 1999, while the production of China offshore fisheries was decreased by 22%. In addition, although the production of marine capture fisheries in the East region of China was reduced by 10%, on the contrary, the production of marine capture fisheries in Liaoning, Hebei, Tianjin, Jiangsu, Zhejiang, and Fujian that have mostly impacted by the Korea-China Fisheries Agreement was increased by 7%. Third, results on fishing capacity of marine fisheries indicated that the number of vessels and total horse power in Korea were increased by 1.2% and 44.9%, respectively, while total tonnage was reduced by 23.9%, For China, the number of vessels and total horse power were increased by 0.5% and 12.6%, respectively. Total tonnage was also increased by 11.7%. Finally, the production per Korean vessel was decreased by 17.8% in 2003 compared to that in 1999. On the contrary, the production per Chinese vessel was increased by 8.1% in 2003. The production per tonnage was increased by 3.2% in Korea, while it was reduced by 2.7% in China. In conclusion, it could be said that the Korea-China Fisheries Agreement has had a positive impact on the fisheries production of China, while it has had a negative impacts on that of Korea, relatively.

• Journal of Welding and Joining
• /
• v.30 no.6
• /
• pp.10-14
• /
• 2012

Recently the low alloy steel plate made with manganese-molybdenum is used widely in steam drum and separator of the new coal-fired power plant boiler. This material is suitable for the vapor storage of high pressure and high temperature. The high temperature creep strength of Mn-Mo alloy is higher than the carbon plate(SA516) that used in the subcritical pressure boiler. It reduces the thickness of the pressure vessel and makes the lightweight possible. Recently in the power plant boiler operation and production process, the damage has happened frequently in the heat affected zone and base material according to the hydrogen crack and delayed crack. This paper describes the research result about the damage case experienced in the boiler steam drum production process and present the optimum manufacture method for the similar damage prevention of recurrence.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.6
• /
• pp.1093-1099
• /
• 2009

Alternative energy sources such as renewable energy like solar power systems, wind power systems, or fuel cell power systems has been the rising issue in the electrical power system. This paper discusses an economic study analysis of fuel cells in the korean electricity market. It includes the basic concept of a fuel cell and the korean electricity market. It also describes the need of renewable energy and how the fuel cell is connected with the local grid. This paper shows the impact of production and recovering thermal energy of a grid-connected fuel cell power system. The profit maximization approach has been structured including electrical power trade with the local grid and heat trade within the micro-grid. The strategies are evaluated using a local load that uses electric and thermal power which has different patterns between summer and winter periods. The solution algorithm is not newly developed one, but is solved by an application called GAMS. Results indicate the need and usefulness of a fuel cell power system.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.11
• /
• pp.1401-1407
• /
• 2018

This paper proposed a method of energy storage system (ESS) operation to increase acceptable production of renewable energy (RE). We analyzed the rebound effect that does not show a demand increase even if the capacity of the ESS is increased and considered the charging time by analyzing the time when the output limit is most generated. The rebound effect was mitigated by adjusting the discharging time of the ESS, and the effect of the increase of acceptable production of the renewable energy was analyzed by adjusting the charging time.