• Journal of Communications and Networks
• /
• v.7 no.1
• /
• pp.36-44
• /
• 2005

In this paper, we present a retransmission power adjustment (RPA) scheme for DS/SSMA ALOHA packet radio systems with packet combining. In the proposed RPA scheme, retransmission power is adjusted in such a way that the erroneously-received packet can be recovered with a minimized interference to other user packets. We analyze the performance of the system with the RPA by employing the equilibrium point analysis (EPA), and confirm that the results obtained from the EPA are very close to the simulation results in low power cases. Simulation results demonstrate that the RPA scheme brings forth performance gain in the throughput and the average delay while saving a significant amount of transmission power. We also investigate the stability of the system from the EPA results, and conclude that the system becomes stable as the offered load increases or the level of retransmission power decreases.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.3
• /
• pp.65-75
• /
• 1998

We consider connection-oriented wireless cellular networks such as the second generation wireless cellular networks and wirelss ATM networks. In these networks, a separate forward signaling channel is provided for the transmission of paging and channel allocation packets. When a call destined to a user is requested, all the base stations in the user's current location area broadcast the corresponding paging packet across forward signaling channels. By slot mode operation and paging group allocation for fusers in a location area, we can reduce relative power consumption level at battery-operated terminals. However, a sthe number of paging groups is increased for lowering relative power consumption level, a paging packet experiences higher delay to access the forward signaling channel. For the pre-negotiated quality-of-service level, paging packet delay level must be limited. In this paper, we consider static and dynamic multiplexing schemes for paging packets, and develop an analytical method for calculating paging packet delay and relative power consumption levels. Using this analytial method, we investigate the effect of network parameters on the paging packet delay and relative power consumption levels.

• Proceedings of the IEEK Conference
• /
• 2009.05a
• /
• pp.201-203
• /
• 2009

In the VANET, density is a most important factor for reception rate of packet. So, we have to find solutions to reduce packet collision. There are two approaches. First, packet collision avoid by controlling transmission interval. Second, packet collision avoid by controlling transmission power. In this paper, we propose a simple method to reduce a packet collision by controlling transmission power. It uses the number of neighbors and adaptive controlling method. This method have better performance about packet reception rate.

• Journal of Communications and Networks
• /
• v.14 no.2
• /
• pp.179-187
• /
• 2012

Power saving is one of the most important features that extends the lifetime of portable devices in mobile wireless networks. The IEEE 802.16e mobile broadband wireless access system adopts a power saving mechanism with a binary truncated exponent algorithm for determining sleep intervals. When using this standard power saving scheme, there is often a delay before data packets are received at the mobile subscriber station (MSS). In order to extend the lifetime of a MSS, the battery energy must be used efficiently. This paper presents a dynamically alternating sleep interval scheduling algorithm as a solution to deal with the power consumption problem. We take into account different traffic classes and schedule a proper sequence of power saving classes. The window size of the sleep interval is calculated dynamically according to the packet arrival rate. We make a tradeoff between the power consumption and packet delay. The method achieves the goal of efficiently reducing the listening window size, which leads to increased power saving. The performance of our proposed scheme is compared to that of the standard power saving scheme. Simulation results demonstrate the superior performance of our power saving scheme and its ability to strike the appropriate performance balance between power saving and packet delay for a MSS in an IEEE 802.16e mobile broadband wireless access system.

• Journal of Communications and Networks
• /
• v.16 no.1
• /
• pp.36-44
• /
• 2014

Exploiting the energy-delay tradeoff for energy saving is critical for developing green wireless communication systems. In this paper, we investigate the delay-constrained energy-efficient packet transmission. We aim to minimize the energy consumption of multiple randomly arrived packets in an additive white Gaussian noise channel subject to individual packet delay constraints, by taking into account the practical on-off circuit power consumption at the transmitter. First, we consider the offline case, by assuming that the full packet arrival information is known a priori at the transmitter, and formulate the energy minimization problem as a non-convex optimization problem. By exploiting the specific problem structure, we propose an efficient scheduling algorithm to obtain the globally optimal solution. It is shown that the optimal solution consists of two types of scheduling intervals, namely "selected-off" and "always-on" intervals, which correspond to bits-per-joule energy efficiency maximization and "lazy scheduling" rate allocation, respectively. Next, we consider the practical online case where only causal packet arrival information is available. Inspired by the optimal offline solution, we propose a new online scheme. It is shown by simulations that the proposed online scheme has a comparable performance with the optimal offline one and outperforms the design without considering on-off circuit power as well as the other heuristically designed online schemes.

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.1721-1723
• /
• 2002

In 3rd-generation mobile communication systems providing packet service, optimal scheduling algorithms we needed to increase service efficiency. In this paper, three scheduling algorithms (SP, EDF, and RPQ) which have been studied in the field of computer networks are applied with transmit power constraint to an interference-limited CDMA system, proving to be efficient.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.2 no.3
• /
• pp.336-341
• /
• 2013

Power converter plays a very important role in switched reluctance motor (SRM) systems, and it is also the easiest one to experience failures. Power converter faults will cause the motor to run in non equilibrium states, and a long time fault operation will lead to motor and other modules damaged, and make the system completely lose working stability. This paper uses an asymmetric bridge converter as the research object with three-phase SRM, employs the wavelet packet decomposition for the phase currents. It analyzes and studies the short circuit fault condition of IGBT, uses an energy discrete degree of the wavelet packet nodes as the fault characteristic, and conducts the corresponding experimental and simulation analysis to verify the effectiveness and practicality of the proposed method.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.681-684
• /
• 2006

A new packet extraction program is presented to extract communication packet between a server and clients. The extracted packet source is used to develope a special driver to access general clients to the server. The proposed scheme employs a relay server to take a specified packet among a large number of packets on the same network. The proposed method is tested in PMS (Plant Management System) sewer and ProDAS (Process Data Aquisition and Analysis System) in a combined cycle power plant. The developed scheme can be applied for extracting a specified communication packet between the general server and client.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.4
• /
• pp.53-60
• /
• 2011

In Wireless Sensor Networks, IEEE 802.11 happen unnecessary energy consume because of packet transmission using maximum power between sensor node. The BASIC scheme is to use maximum transmission power for RTS-CTS and minimum required transmission power so as to high energy efficiency for DATA-ACK. However BASIC scheme may degrade network throughput with collision of ACK packet by node in carrier sensing zone and may result in higher energy consumption than when using IEEE 802.11 without power control. Existing PCM(Power Control MAC) scheme is to use DATA packet transmission method by periodically maximum power level so as to sensing DATA packet transmit in carrier sensing zone of transmission node, and this method can avoid collision of ACK packet. This paper present problem by energy efficiency of PCM scheme, and design some more improved PCM scheme.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.156-159
• /
• 2009

Speckle noise reduction for 3D power doppler ventricle coherent image for restoration and enhancement using wavelet packet transform with separated thresholding is presented. Wavelet Packet Transform divide into low frequency component image to high frequency component image to be multi-resolved. speckle noise is located on high frequency component in multiresolution image mainly. A ventricle image is transformed and inversed with separated threshold function from low to high resolved images for restoration to be utilize visualization for ventricle diagnosis. The experimental result shows that the proposed method has better performance in comparison with the conventional method.