• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.593-596
• /
• 2005

The MSC is a remote sensing instrument with very high performance that is to be installed on KOMPSAT2 satellite. The MSC consists of EOS (Electro-Optic Subsystem), PMU (Payload Management Unit) and PDTS (Payload Data Transmission Subsystem). PMU controls and monitors all the other payload units by sending commands and collecting telemetry. PMU is in charge of interfacing between payload system and satellite bus system. PMU gets commands from ground-station via OBC (On-Board Computer) that is a main controller of the satellite bus system and sends telemetry to the ground-station via OBC. There is a processor module, called SBC (Single Board Computer) in the PMU. The SBC is a main controller of the MSC system. The main roles of the SBC are payload mission management, command validation and execution, telemetry collection and monitoring, ancillary data handling, event reporting, power control of payload sub-units and communication with these units. Intel's 80486DX2 processor has been used for the SBC. Due to the fact that the SBC plays important roles for imaging mission execution and handles a lot of control data that is required for payload operation, it is required to make analysis of the CPU load when it is in maximum operation mode. In this paper, the analysis and measurement results of the SBC throughput in the maximum operation mode.

• Journal of Convergence for Information Technology
• /
• v.11 no.6
• /
• pp.14-23
• /
• 2021

The Army is making efforts to increase combat power by incorporating technologies related to the Fourth Industrial Revolution into the field of defense. In order to utilize these technologies, it is necessary to develop a military tactical communication system that enables transmission and reception of data between command and control system and weapon systems. Therefore, in this paper, we analyze the tactical communication systems of the other countries, derive the limitations of the tactical communication system currently operating in the military. And, a multi-layered integrated operation structure centered on satellites and plans to provide communication on the move to small units are reviewed. Then, we present the necessity of a large-capacity transmission speed by predicting the amount of data that will be generated from weapon systems of the future, and a plan to efficiently manage the network using intelligent network technology.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.7
• /
• pp.292-299
• /
• 2013

In this paper, we developed a data transmission system over coaxial cable based on the IEEE 802.15.3 MAC and Ultra-Wideband(UWB) Physical Layer. This system is capable of operation in both wireless and wired medias. When operating on coax cable it is capable of Gigabit bi-directional data rate operation on in-home coax wiring and over Hybrid-Fiber-Coax(HFC) cable infrastructure. The developed system transceives command, control and data over a 75 ohm coax system in a home or office. This system operates at a center frequency of 4GHz with a total occupied bandwidth of 1.33Ghz centered on 4GHz. The system uses BPSK modulation and sends symbols at a maximum power level of +15dBm. It has been tested and works through up to three CATV RF splitters in a home environment.

• Convergence Security Journal
• /
• v.6 no.4
• /
• pp.141-151
• /
• 2006

The destructive power of cyber threat arrived to until the phase which it threatens to direct and seriously in national security undergoes an important national institutuin hacking event of 2004 and Internet paralysis accidents of 2003. 1. 25. So Cyber terror and Cyber warfare is not the hypothetical enemy situation. It is more actual security situation and identify as magnification of warfare concept of incapacitation national important ability include military command system of the adversary, communication, energy, finance and transportation system. consequently, with the progress of cyber threat, it is necessary that looking at a number of general plan to make up for the weak points in cyber warfare operation system. Thus, the focus of this study is to examine new ways of developing a comprehensive cyber security management system.

• Journal of IKEEE
• /
• v.15 no.1
• /
• pp.15-22
• /
• 2011

In order to performing the joint operation of Korean army efficiently, informations about surveillance, reconnaissance, and situation awareness need to be possessed jointly. In the first development phase (basis type) of the Korean joint tactical data link system (JTDLS-K), essential tactical information and recognized situation are owned among platforms in common by using existing wireless terminals. In the second development phase (completion type) of the JTDLS-K, a JTDLS which can perform network centric warfare (NCW) will be developed in due consideration of technology development of the basis type and common technology maturity degree. This is a joint battlefield system that can show fighting power simultaneous and polysynthetically through providing command and control messages effectively to each platform, which is participating in the joint and combined operations. In this paper, the development of JTDLS-K with a common data processor based on common link integration processing (CLIP) is described. From the test results of the system presented in this paper, it is demonstrated that quadrature phase shift keying (QPSK) signals can be applied to the system.

• Convergence Security Journal
• /
• v.17 no.1
• /
• pp.81-88
• /
• 2017

The purpose of this study is to analyze any hinderance factors for successful attending system of Korean National Assembly and to provide improvement plans of legal systems to ensure security of National Assembly. First, the conceptualization and functions of Korean National Assembly attending system were discussed and related regulations and laws were also examined. Second, hinderance factors, such as sharp increase in 1) illegal behaviors, 2) bring in prohibited items, and 3) possibility of National Assembly terror, for successful attending systems were analysed. Third, improvements of legal system for security enhancement of National Assembly Attending System were discussed: 1) new legislation for providing National Assembly's security officers with special judicial police power is needed to deal with criminal behaviors and to protect human rights, and 2) legal reforms are required to provide right to command to National Assembly's Security Planning Office rather than National Assembly security office under Seoul Metropolitan Police Agency in order to unify commanding system.

• Journal of Aerospace System Engineering
• /
• v.11 no.5
• /
• pp.28-35
• /
• 2017

Magnetic Suspension and Balance System (MSBS) demonstrates the capacity to levitate an experimental model absent any mechanical contact using magnetic forces and moments. It allows precise control of position and attitude of the model, and measures external forces and moments acting on the model. For the purpose of acquisition of reliable experimental results under stable and safe conditions, the performance and robustness of the position and attitude control system of MSBS needs to be improved. To this end, Iterative Feedback Tuning (IFT) and L1 adaptive output feedback algorithm were employed to automatically increase command following performance and to ensure robust operation of MSBS with failure of electric power supply. The applicability was validated using computational simulation.

• Journal of the Korea Society for Simulation
• /
• v.19 no.3
• /
• pp.27-35
• /
• 2010

War-games using C4I systems have been used to improve the command ability of commanders and the fighting power of combat forces. During a war-game simulation, a commander makes a plan for the movement of a combat force and issues orders to the combat force according to the plan. If it is possible to minimize damages from the artillery of enemy forces and take the advantage position where is effective for attack/defense, we can hold a dominant position of the battlefield. Therefore, this papers proposes a genetic algorithm-based optimal path searching method. The proposed method creates an optimal path of a combat force by taking into consideration dangerous conditions of the battlefield in which the combat force is. This paper also shows the process of creating an optimal path by using a discrete event specification modeling and simulation method.

• Journal of Drive and Control
• /
• v.17 no.2
• /
• pp.1-8
• /
• 2020

Recently, industrial systems are becoming quicker and lighter to enable the reduction of energy consumption and increase productivity. So the latest systems are more flexible and rapid than the previous systems. But, with this improvement, another problem has emerged, such as the increase in residual vibration when a system is started or stopped. The input shaper is a command generation method that can remove residual vibration. It can provide a solution to the problem of residual vibration in industrial systems. However, it is difficult to generate the input shaper in high order systems, such as a typical industrial system because the input shaper is induced from the system's vibration characteristics. This study focused on the extra insensitivity shaper that can compensate for the system's modeling error such as input dynamics, and the high order's system affection. A genetic algorithm was deployed to adjust a vibration limitation for the extra insensitivity of the input shaper. A plant is a low damping system that includes one zero and a pole. The fitness functions are an error signal of the system's response with normalized frequency variations. Verification of the suggested system is satisfied by comparison between the zero vibration derivative input shaper's response and the suggested one.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.25 no.12
• /
• pp.807-814
• /
• 2015

A control rod drive mechanism(CRDM) is a reactor regulating system, which inserts, withdraws or maintains a control rod containing a neutron absorbing material within a reactor core to control the reactivity of the core. The top-mounted CRDM for Jordan Research and Training Reactor(JRTR) with 5 MW power has been designed and fabricated based on the HANARO's experience through KAERI and DAEWOO consortium project. This paper describes the performance qualification test results to demonstrate the operability of a prototype and four production CRDMs during the reactor lifetime. The driving performance, the drop performance and the endurance tests for CRDM are carried out at a test rig simulating the actual reactor conditions. A vibration of internal components due to the coolant flow is also measured using a laser vibrometer. As a result, the CRDMs are driven having a good driving performance without a malfunction between command and output signals for the stepping motor. Also, the pure drop time and the impact acceleration are within 0.72 s and 4.2 g to meet the design requirements, and the vibrational displacement of control rod is measured as maximum $5.2{\mu}m$.