• 제목/요약/키워드: Power monitoring

검색결과 2,821건 처리시간 0.032초

Correlation analysis of the wind of a cable-stayed bridge based on field monitoring

  • Li, Hui;Laima, Shujin;Li, Na;Ou, Jinping;Duan, Zhondong
    • Wind and Structures
    • /
    • 제13권6호
    • /
    • pp.529-556
    • /
    • 2010
  • This paper investigates the correlation of wind characteristics monitored on a cable-stayed bridge. Total five anemoscopes are implemented into the bridge. Two out of 5 anemoscopes in inflow and two out of 5 anemoscopes in wake-flow along the longitudinal direction of the bridge are installed. Four anemoscopes are respectively distributed at two cross-sections. Another anemoscope is installed at the top of the tower. The correlation of mean wind speed and direction, power spectral density, the turbulent intensity and integral length of wind in flow at two cross-sections are investigated. In addition, considering the non-stationary characteristics of wind, the spatial correlation in time-frequency is analyzed using wavelet transform and different phenomenon from those obtained through FFT is observed. The time-frequency analysis further indicates that intermittence, coherence structures and self-similar structures are distinctly observed from fluctuant wind. The flow characteristics around the bridge deck at two positions are also investigated using the field measurement. The results indicate that the mean wind speed decrease when the flow passing through the deck, but the turbulence intensity become much larger and the turbulence integral lengths become much smaller compared with those of inflow. The relationship of RMS (root mean square) of wake-flow and the mean wind speed of inflow is approximately linear. The special structures of wake-flow in time-frequency domain are also analyzed using wavelet transform, which aids to reveal the forming process of wake-flow.

CT 검사에서 조영제의 혈관외유출 예방을 위한 EDA 시스템 개발의 예비 보고 (The Development of Extravasation Detection Accessory System for the Preventive Contrast Media Extravasation in the Computed Tomography: A Preliminary Report)

  • 권대철;정석희;김태형;김정구;박범
    • 한국의학물리학회지:의학물리
    • /
    • 제17권1호
    • /
    • pp.32-39
    • /
    • 2006
  • CT 검사에서 조영제의 혈관외유출을 예방하기 위해 EDA시스템을 증폭기, ADC, 스트레인 게이지로 구성하여 개발하였고, 스트레인 게이지의 신호의 수치를 나타내도록 프로그램을 설계하였다. 신호비율은 500/1000 sec, 분해능 값은 0에서 4,096범위로 표시하고, 입력범위 $0{\sim}5$ V이다. 혈관외유출 검출 문턱 값은 50으로 하였고, 10 간격으로 조정하도록 하였다. 개발된 EDA 시스템을 성인 50명을 대상으로 적용하였다. 2명의 환자에서 혈관외유출이 검출되었고, 조영제 주입속도는 2.0 mL/sec, 2.5 mL/sec, 압력은 137 psi, 158 psi, 혈관외유출된 조영제 용량은 22 mL, 25 mL였다. 설정된 주입 조영제에 비해 20% 정도의 적은 용량이 혈관외유출되었다. 개발된 EDA 시스템은 소량의 조영제를 검출하여 혈관외유출을 예방하는 효과가 있다.

  • PDF

무선 센서 네트워크에서 효율적인 에너지 사용을 위한 클러스터링 알고리즘 (Clustering Algorithm for Efficient Energy Consumption in Wireless Sensor Networks)

  • 나성원;최승권;이태우;조용환
    • 한국컴퓨터정보학회논문지
    • /
    • 제19권6호
    • /
    • pp.49-59
    • /
    • 2014
  • 최근 무선 센서 네트워크(WSN)이 침입 탐지와 생태, 환경, 대기, 산업, 교통, 화재 감시 등에 다양하게 적용되어 사용되고 있다. 본 논문에서는 에너지 효율적인 클러스터링 알고리즘을 제안한다. 제안 알고리즘은 수신전력을 바탕으로 하여 최적위치의 클러스터헤드를 선출하고 이를 통해 균일한 클러스터사이즈를 가지도록 한다. 또한 최대 깊이가 제한된 MST를 이용한 라우팅 트리를 구성하고 멀티 홉 전송을 통해 센서 노드의 위치에 관계없이 균일한 에너지 소모를 유도하도록 하였다. 이를 통해 제안 알고리즘은 기존의 LEACH나 HEED에 비해 노드의 에너지 소모를 감소시키고 균등한 에너지 소모를 유도하여 네트워크 수명을 증대시킬 수 있다. 시뮬레이션 결과 제안 알고리즘이 공평한 에너지 소모를 통해 네트워크 수명을 증대시킬 수 있음을 확인하였다.

머신러닝 기반 스마트 단말기 Lithium-Ion Cell의 잔량 추정 방법의 실증적 연구 (An Empirical Study on Machine Learning based Smart Device Lithium-Ion Cells Capacity Estimation)

  • 장성진
    • 문화기술의 융합
    • /
    • 제6권4호
    • /
    • pp.797-802
    • /
    • 2020
  • 지난 몇 년 동안 스마트 폰을 비롯한 다양한 스마트 기기들은 휴대성을 기반으로 사용자의 요구에 의해 지속적으로 성능이 향상 되고 있다. 유비쿼터스 컴퓨팅 (Ubiquitous Computing) 환경과 센서 네트워크 (Sensor network)등의 다양한 망 접속 기술로 인하여 휴대성을 기반으로 하는 단말기들이 다양하게 보급되어 사용되고 있다. 스마트 단말들은 사용 중에 보다 안정적인 동작을 위하여 에너지 모니터링을 세밀하게 할 수 있는 기술이 필요하게 되었다. 소형 경량화 된 스마트 단말기는 다양한 멀티미디어 작업으로 인하여 단말 운용 중에 전원 부족 문제가 발생하게 된다. 이와 같은 상황을 미리 방지하고 안정적인 단말 운용을 위해서 기존에 다양한 추정 하드웨어가 개발 되었다. 그러나 잔량 추정을 하는 방법이나 성능이 비교적 우수하지 못하였다. 본 논문에서는 스마트 단말의 운용 중에 발생 할 수 있는 잔여 잔량 문제를 미리 예측하여 보다 안정적인 운용을 위한 리튬이온 셀의 잔량 추정 방법을 머신러닝에 기초를 두고 연구 하였다. 기존의 하드웨어적인 추정 방법이 아니라 사용 중인 리튬이온 셀의 특성을 머신러닝 기법을 이용한 학습 알고리즘으로 학습 시키고 최적화된 결과를 추정하여 적용 하고자 한다.

Vibration control of small horizontal axis wind turbine blade with shape memory alloy

  • Mouleeswaran, Senthil Kumar;Mani, Yuvaraja;Keerthivasan, P.;Veeraragu, Jagadeesh
    • Smart Structures and Systems
    • /
    • 제21권3호
    • /
    • pp.257-262
    • /
    • 2018
  • Vibrational problems in the domestic Small Horizontal Axis Wind Turbines (SHAWT) are due to flap wise vibrations caused by varying wind velocities acting perpendicular to its blade surface. It has been reported that monitoring the structural health of the turbine blades requires special attention as they are key elements of a wind power generation, and account for 15-20% of the total turbine cost. If this vibration problem is taken care, the SHAWT can be made as commercial success. In this work, Shape Memory Alloy (SMA) wires made of Nitinol (Ni-Ti) alloys are embedded into the Glass Fibre Reinforced Polymer (GFRP) wind turbine blade in order to reduce the flapwise vibrations. Experimental study of Nitinol (Ni-Ti) wire characteristics has been done and relationship between different parameters like current, displacement, time and temperature has been established. When the wind turbine blades are subjected to varying wind velocity, flapwise vibration occurs which has to be controlled continuously, otherwise the blade will be damaged due to the resonance. Therefore, in order to control these flapwise vibrations actively, a non-linear current controller unit was developed and fabricated, which provides actuation force required for active vibration control in smart blade. Experimental analysis was performed on conventional GFRP and smart blade, depicted a 20% increase in natural frequency and 20% reduction in amplitude of vibration. With addition of active vibration control unit, the smart blade showed 61% reduction in amplitude of vibration.

배지 조성이 번데기 동충하초의 영양성분 및 Cordycepin 함량에 미치는 영향 (Effect of medis composition on the Cordycepin and content Nutritional Components of Cordyceps militaris)

  • 조수묵;박홍주;서건식;홍종덕
    • 한국균학회지
    • /
    • 제37권2호
    • /
    • pp.161-166
    • /
    • 2009
  • The purpose of the present study is to develop a simple, fast and sensitive LC/MS method for simultaneous separation and the determination of an active component in the oriental medicinal mushroom Cordyceps militaris. Based on this work, the contents of cordycepin in Cordyceps militaris fruiting cultivated on various media were determined and compared. And also, the nutritional components such as minerals and vitamins were determined in order to provide useful information to consumer as a food material. The analysis methods of nutritional components were chosen on the basis of AOAC. The optimum separation for cordycepin was achieved using a solvent gradient consisting of the mixture of 0.1% formic acid in methanol (solvent B) in a background of 0.1% formic acid in water (solvent A) as a mobile phase and a 3.0${\times}$150 Waters XTera column. Selective ion monitoring (SIR) mode ([M+H]+ at m/z 252) was used for quantitative analysis of cordycepin. The cultivated Cordyceps militaris on various media contained 1~14 /g of cordycepin, 0.65~1.08% of thiamine, 0.86~7.17% of riboflavin, and 3.01~5.26% of niacin. The content of mineral components varied on categories, especially contained 500~3500% of potassium as a major mineral. Cordycepin, niacin and potassium were found much higher in the fruiting cultivated with soy power media (gold 10) than other media.

12kW급 건물일체형 태양광발전시스템 사례분석 (Case Study on 12kW Building Integrated Photovoltaic System)

  • 박경은;강기환;김현일;소정훈;유권종;김준태;이길송
    • 한국태양에너지학회 논문집
    • /
    • 제29권1호
    • /
    • pp.18-23
    • /
    • 2009
  • We intend to describe a 12kW building-integrated photovoltaic system which was applied into the south wall of a new building. This study showed the results that were appeared from describing the PV module manufacture and installation process, and performing generation performance analysis of BIPV system. From the result we confirmed that the generation performance of the BIPV system was changed by season. The performance ratio(PR) was about 83.6% in winter and it means that performance of this BIPV system was so good in that season. On the other hand, the PR in summer was about 75.0% dropped about 8%. It was believed that the change was influenced by the reduction of solar radiation irradiated into the PV modules by installation position and rainy spell in summer. And we also confirmed that low irradiation condition is cause of the additional loss in the total PV system. In this case, the efficiency ratio of PCS drops significantly at low input loads and the average conversion efficiency of PCS in summer was 76.4% decreased about 10% from 86% in winter.

화학기상증착 진공공정의 실시간 진단연구 (The Study on In-situ Diagnosis of Chemical Vapor Deposition Processes)

  • 전기문;신재수;임성규;박상현;강병구;윤진욱;윤주영;신용현;강상우
    • 한국진공학회지
    • /
    • 제20권2호
    • /
    • pp.86-92
    • /
    • 2011
  • 본 연구에서는 새롭게 개발된 센서인 in-situ particle monitor (ISPM)와 기존센서의 기능을 업그레이드 한 센서인 self-plasma optical emission spectroscopy (SPOES)를 이용해 화학기상증착 진공공정을 진단하였다. 본 연구에서 사용된 증착공정 장비는 silane 가스를 이용한 silicon plasma enhanced chemical vapor deposition과 borophosphosilicate glass 증착장비이다. 두 장비의 증착 또는 클리닝 조건에서의 배출되는 오염입자와 배기가스를 개발된 센서를 이용해 공정상태를 실시간으로 진단하는 것과 개발된 센서의 센싱 능력을 검증하고자 하는 목적으로 연구가 진행되었다. 개발된 센서는 장비 배기구 설치되었으며, 공정압력, 유량, 플라즈마 파워 등의 공정변수 변화에 따른 오염입자 크기 및 분포와 배기 부산물의 변화를 측정하고, 측정 결과의 상호 연관성을 분석하였다.

ICT 기반 가축 감염병 대응을 위한 커뮤니티 매핑 연구 (A Study on Community Mapping for ICT-Based Livestock Infectious Disease Response)

  • 구지희;편무욱
    • 한국측량학회지
    • /
    • 제38권3호
    • /
    • pp.247-257
    • /
    • 2020
  • 구제역과 같은 가축 전염병은 강한 전염력으로 인해 막대한 경제적 손실을 초래하고 있다. 가축의 전염성 질병은 조기 감지가 매우 중요하나, 개별 농가에서 조기 진단이 어렵고, 수의사나 사료 공급 차량 등의 농장간 이동을 통해서 전파되는 사례도 빈번하다. 본 연구에서는 발병 초기단계에서 유비쿼터스 기반의 정보통신기술을 이용하여 가축의 체온을 자동으로 모니터링 하여 실시간 전송함으로써 수의사의 농장방문 없이 빠른 진단이 가능하고 추가 확산을 방지하는 기술을 연구하였다. 자동으로 수집된 정보와 연계된 원격진료시스템을 활용하여 농장단위, 지역단위, 국가단위에서 가축전염병을 커뮤니티 매핑 기법을 이용하여 체계적으로 관리하는 기술을 제시하였다. 이 과정에서 사용자 참여형 공간정보기술 적용을 위한 각 단계별, 주체별 커뮤니티 매핑 항목을 도출하였다.

안전관제시스템 프로토콜 표준화를 위한 데이터 수집 방법 (Data Collection Methods to Standardize Protocols of Safety Supervision System)

  • 신광호;엄태화;임담섭;안진
    • 한국철도학회논문집
    • /
    • 제19권2호
    • /
    • pp.159-169
    • /
    • 2016
  • 국내 철도의 관제는 신호, 전철전력, 통신, 설비 등 분야별로 고유한 시스템으로 구축되어 있다. 각 분야의 관제시스템은 현장 설비의 센싱 데이터를 중앙관제로 전송하는 매체와 프로토콜이 서로 상이하다. 안전관제시스템은 각 분야의 안전에 관련된 데이터를 모두 수집하여 철도 사고를 예측하고 예방하는 것을 목적으로 하며 표준 프로토콜을 사용한다. 안전관련 데이터는 기존 관제시스템의 현장 데이터 전송장치에서 데이터 수집이 필요하다. 이때 중요한 점은 기존 관제시스템 통신에 영향 없이 데이터를 수집하는 방법이다. 본 논문에서는 데이터를 수집하는 방법으로 네트워크 트래픽 감시나 보안용으로 사용되는 스니핑을 이용한다. 스니핑 장치를 사용할 때 야기되는 문제점을 설명하고 해결 방법으로 패킷 변환 노드를 제안하였다. 추가적으로 프로토타입을 개발하여 기능과 성능 테스트를 수행하여 S/W아키텍처와 패킷 변환 과정에 대해 검증하였다.