• Nuclear Engineering and Technology
• /
• 제24권3호
• /
• pp.285-296
• /
• 1992

가압경수로형 원전을 위한 운전조정기의 개념 설계를 수행하였다. 운전조정기는 디지탈 감시 제한 계통으로서, 원전의 주요 운전 인자들을 감지하여 운전 제한치를 벗어나지 않도록 조정한다. 이는 운전 유연성을 향상시켜서 원전이 전력망 요구에 효과적으로 대처할 수 있도록 한다. 운전 허용 범위를 넘어서는 전력망 요구에 대해서 이를 제한하거나 제어 체계를 변경함으로써 이용률에 영향을 주지 않으며 운전을 수행할 수 있도록 한다. 이 개념은 1000 MWe급 가압경수로인 영광 3,4호기의 거동 모의를 통하여 평가되었다. 그 모의 계산 결과 운전 조정기가 원전의 운전 유연성 향상을 위하여 유용하게 사용될 수 있음을 보여 주었다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제5권5호
• /
• pp.1049-1068
• /
• 2011

In this paper a simple and effective call admission control (CAC) scheme is proposed for the emerging interleave-division multiple-access (IDMA) systems, supporting a variety of traffic types and offering different quality of service (QoS) requirements and priority levels. The proposed scheme is signal-to-interference-plus-noise ratio (SINR) evolution based CAC (SE-CAC). The key idea behind the scheme is to take advantage of the SINR evolution technique in the process of making admission decisions, which is developed from the effective chip-by-chip (CBC) multi-user detection (MUD) process in IDMA systems. By virtue of this semi-analytical technique, the MUD efficiency can be estimated accurately. Additionally, the computational complexity can be considerably reduced. These features make the scheme highly suitable for IDMA systems, which can combat intra-cell interference efficiently with simple CBC MUD. Analysis and simulation results show that compared to the traditional CAC scheme considering MUD efficiency as a constant, the proposed SE-CAC scheme can guarantee high power efficiency and throughput for multimedia traffic even in heavy load conditions, illustrating the high efficiency of CBC MUD. Furthermore, based on the SINR evolution, the SE-CAC can make accurate estimation of available resource considering the effect of MUD, leading to low outage probability as well as low blocking and dropping probability.

• 에너지공학
• /
• 제2권2호
• /
• pp.200-207
• /
• 1993

본 논문은 5.9kW급 인산형 연료전지 발전시스템의 운전에 필요한 메탄올 연료개질기의 설계와 이의 운전 특성에 관한 것이다. 연료개질장치는 메탄올을 연소용 및 개질용연료로 사용하며, 개 질 반응 촉매는 CuO-ZnO계를 사용하고, 개질 반응기는 단일 환형 반응기 형태로 설계하였다. 개질 장치의 일산화탄소 생성 특성은 전체적으로 이론적인 평형값에는 도달하지 못하였으나, 반응온도가 증가할수록 농도가 증가하였으며, 개질 연료의 물/메탄올 몰비가 증가하면 감소하였다. 정격운전에서 촉매반응기의 축방향 온도분포는 이론적인 값과 잘 일치하였으며, 운전 개시후 50분 훈에 정상 운전이 가능하였다. 개질 시스템의 효율은 정격운전에서는 72.3%, 1/4 부하에서는 77%로 부하가 증가할수록 효율은 감소하였다. 개질기를 연료전지 본체와 연계운전시 개질기에 개질용 메탄올 및 연소용 메탄올의 공급유량이 각각 88.1 mol/h, 50.0mol/h 인 경우 정격전압인 37.6V의 전안에서 안정적인 5.5 kWh의 전력을 생산 할 수 있었다.

• Journal of the Korean Wood Science and Technology
• /
• 제33권5호통권133호
• /
• pp.57-65
• /
• 2005

Following our previous reports for finger-jointed woods with various finger profiles studied for the efficient use of small diameter logs and woods containing various defects, twelve types of finger-jointed woods glued with three kinds of adhesives and with two sizes of finger pitches were made with sitka spruce and red pine. The effects of the adhesives and finger pitches on bending creep performances of finger-jointed woods were investigated. The shape of creep curves differed among the used adhesives and finger pitches of finger-jointed woods for both tested species. Their creep curves showed a linear behavior beyond about one hour, and the N values fitted to power law increased with increasing finger pitches. The initial deformation increased with increasing finger pitches, regardless of the tested species and kinds of adhesives, whereas the effect of finger pitches on the creep deformation was not clear. For finger-jointed woods glued with polyvinyl acetate (PVAc) resin, creep failure occurred in 106 hours after the load was applied. And the difference of the creep compliance between finger-jointed woods glued with resorcinol-phenol formaldehyde (RPF) resin and aqueous vinyl urethane (AVU) resin was small. The ratios for creep performances of finger-jointed woods glued with RPF resin and AVU resin versus solid wood were higher in creep deformation than initial deformation for both species, and the difference between both adhesives was not found. The relative creep decreased with increasing finger pitches, and the marked differences was not found between RPF resin and AVU resin.

• 한국해양공학회지
• /
• 제32권3호
• /
• pp.202-207
• /
• 2018

This paper presents the efficiency of a floating vertical axis wind turbine with variable-pitch. A model was designed to use the lift force and drag force for blades with various pitch angles. The blade's pitch angle is controlled by the stopper. To validate the efficiency of the wind turbine discussed in this paper, a model test was carried out through a single model efficiency experiment and wave tank experiment. The parameters of the single model efficiency experiment were the wind speed, electronic load, and pitch angle. The wave tank experiment was performed using the most efficient pitch angle from the results of the single model efficiency experiment. According to the results of the wave tank experiment, the surge and pitch motion of a structure slightly affect the efficiency of a wind turbine, but the heave motion has a large effect because the heights of the wind turbine and wind generator are almost the same.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제6권1호
• /
• pp.52-58
• /
• 2006

Single-electron transistor (SET)-based logic cells and SET/FET hybrid integrated circuits have been fabricated on SOI chips. The input-output voltage transfer characteristic of the SET-based complementary logic cell shows an inverting behavior where the output voltage gain is estimated to be about 1.2 at 4.2K. The SET/FET output driver, consisting of one SET and three FETs, yields a high voltage gain of 13 and power amplification with a wide-range output window for driving next circuit. Finally, the SET/FET literal gate for a multi-valued logic cell, comprising of an SET, an FET and a constant-current load, displays a periodic voltage output of high/low level multiple switching with a swing as high as 200mV. The multiple switching functionality of all the fabricated logic circuits could be enhanced by utilizing a side gate incorporated to each SET component to enable the phase control of Coulomb oscillations, which is one of the unique characteristics of the SET-based logic circuits.

• 한국수소및신에너지학회논문집
• /
• 제27권4호
• /
• pp.431-440
• /
• 2016

Electric or hydrogen energy source is expected to solve a various issues including energy security and exhaust pollution. However, it is required a lot of time and a variety of development to apply for commercialization. Therefore, it is needed to translation fuels between the future and the present. DME (Dimethyl Ether) can play a reduce exhaust emission from medium- to heavy-duty engines that are mostly used in commercial sector. It have applied to the DME fuel as a various alternative fuel including power generation in many countries. Especially, it is necessary to secure the energy of energy-poor areas that are widely distributed around the world. And Korea also has the energy-poor areas due to geographical characteristics. These areas has been covered by their own energy through some small diesel generators, diesel boiler etc. If DME fuels are supplied in new demand such as rural sector with energy poor area, DME fuel will be available in the wider sector. In this study, it investigated performance and emission characteristics of agricultural generator and air heater using DME fuel. So the existing equipment of generator and air heater was modified to apply DME fuel. And combustion characteristics and properties of exhaust gas according to the contents of the DME fuel were evaluated. DME fuel showed a potential application in agricultural generator and air heater.

• 한국지반환경공학회 논문집
• /
• 제18권8호
• /
• pp.5-15
• /
• 2017

풍력발전기의 안정성 평가를 위해 수행하는 통합하중해석에서 기초는 하중과 변위의 관계로 정의되는 기초강성을 입력하여 적용이 가능하다. 이때 기초의 형상과 지반의 조건이 정확하게 반영된 기초의 강성이 적용되어야 하므로, 지반의 탄소성 거동을 정밀하게 반영한 버킷기초의 강성 산정방법이 필요하다. 본 연구에서는 다양한 사질토의 마찰각과 버킷기초 형상에 대한 유한요소해석을 수행하여 기초의 강성을 산정하였으며, 해석결과로부터 정규화된 기초강성 매트릭스가 제안되었다. 제안된 버킷기초의 강성 산정방법은 설계에 직접 적용될 수 있는 유용한 결과라고 판단된다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.232-235
• /
• 2008

The vibration of steam turbine is caused by Mass Unbalance, Shaft Misalignment, Oil Whip and Rubbing etc. but in turbine which is normally operated and maintained, the Mass Unbalance component possesses the greatest portion. Our power plant has two steam turbines in capacity of 200MW and 135MW respectively and each turbine is supported by 6 journal bearings. However, we had many difficulties because the vibration amplitude of No 3 and 4 Bearings was high during the start-up and operation mode change of steam turbine. But, with this study, we completely solved the vibration problem caused by the mass unbalance of No 1 steam turbine. Until a recent date, No 3 and 4 bearings which support high pressure turbine for No 1 steam turbine had shown about 135${\mu}$m in vibration amplitude (sometimes it increased to 221${\mu}$m maximum. alarm: 6mils, trip: 9mils) at base load. After applying the study, they decreased to about 40${\mu}$m maximum. It is a result from that we did not change the setting value of Bearing Alignment and only changed the assembly position of internal parts in Synchro Clutch Coupling Rachet Wheel which links between high pressure turbine and low pressure turbine, and increased the internal gap and machining of the Pawl stopper surface. In the operation of steam turbine, if the vibration value increases by 1X, we should reduce the vibration of bearing by weight balancing. However, unless the vibration of bearing is declined by the balancing, we will have to disassemble and check the component and find the cause. In this study, We researched the way to lower mass unbalance that is 1X vibration component which has the greatest portion of vibration generated by steam turbine and We got good result by applying the findings of this study.

• Asia pacific journal of information systems
• /
• 제12권4호
• /
• pp.193-213
• /
• 2002

The sales activity of most of small manufacturing companies is based on orders of buyers. The process of promotion, negotiation, receipt and selection of orders of the manufacturers is closely coupled with the load status of the production lines. The decision on whether to accept an order or not, or the selection of optimal order set among excessive orders is entirely dependent on the schedule of production lines. However, in the real world, since the production scheduling activity is mainly performed by human experts, most of small manufacturers are suffer from being unable to meet due dates, lack of rapid decision on the acceptance of new order. Recently, Internet based Electronic Commerce is recognized as one of the alternatives for strengthening sales power of small and medium companies. However, small and medium manufacturers can't adjust properly to the new environment because they are in short of money, personnel, and technology. To cope with this problem, this paper deals with development of part sales agent coupled with virtual manufacturing in Internet environment that consist of selection agent, advertisement agent, selection agent, negotiation agent, and virtual manufacturing system. This paper develops a time-bounded negotiation mechanism for small and medium manufacturers in agent-based automated negotiation between customers and negotiation agents. Furthermore, to select optimal order set maximized profit, we first formulate the order selection problem with mixed integer programming, but the computation time of IP is not acceptable for real world scale problem. To overcome this problem and dynamic nature of virtual manufacturing, we suggest a genetic algorithm approach, which shows a reasonable computation time for real world case and good incremental problem solving capability.