• 한국수소및신에너지학회논문집
• /
• 제16권1호
• /
• pp.66-73
• /
• 2005

Hydrogen linear power system is estimated as the next generation power system which can obtain a performance as same as fuel cell. In order to develop Hydrogen combustion power system with high thermal efficiency, it is very important to understand the basic characteristics of hydrogen combustion and establish combustion stabilization technique of its system. In this study, RICEM(Rapid Intake Compression Expansion Machine) for researching of hydrogen combustion linear power system was manufactured and evaluated, and the basic characteristics of linear RICEM were analyzed.

• 융복합기술연구소 논문집
• /
• 제5권1호
• /
• pp.19-22
• /
• 2015

Human powered aircraft (HPA) is an airplane that uses only human power for its propulsion. The human power as a power resource and an engine produce the available power that is very crucial to the success of the HPA. In the present paper, the human power characteristics for completing the mission profile are discussed focusing on the take-off and climbing performance. The mission profile is designed by using an athlete's power generation. It is believed that present analysis can be helpful for the mission profile design and athletes exercise program development for the HPA competitions.

• 신재생에너지
• /
• 제1권4호
• /
• pp.49-54
• /
• 2005

There is close relation between the heat generation in the fuel cell stack and the fuel performance. In PEM fuel cell vehicles, the stack coolant temperature is about $65^{\circ}C$, which is far lower than that for general automobile engine. Therefore, it is hard to release heat generated in the stack by using a radiator of limited size because of the reduced temperature difference between the coolant and the ambient air. In this study, indirect stack cooling system using $CO_2$ heat pump was designed and its stack cooling performance in releasing heat to the ambient was investigated. This work focuses on a series of processes that grasp the relation among the fuel cell power, the radiator capacity and the stack temperature. The purpose of this work is to find out a way to properly release sufficient amount of heat through the finite sized radiator, so that the slack power generation can not be deteriorated due to the stack temperature increase. The optimization between the compressor power consumption and the fuel cell output power can be carried out to maximize the performance of fuel cell system.

• 조명전기설비학회논문지
• /
• 제27권11호
• /
• pp.57-68
• /
• 2013

The market for distributed power generation based on renewable energy is increasing, particularly for standalone mini-grid applications in developing countries with limited energy resources. Stand-alone power systems (SAPS) are of special interest combined with renewable energy design in areas not connected to the electric grid. Traditionally, such systems have been powered by diesel engine generator sets (DEGS), but also hybrid systems with photovoltaic and/or wind energy conversion systems (WECS) are becoming quite common nowadays. Hybrid energy systems can now be used to generate energy consumed in remote areas and stand-alone microgrids. This paper describes the design, simulation and feasibility study of a hybrid energy system for a stand-alone power system. A simulated model is developed to investigate the design and performance of stand-alone hydrogen renewable energy systems. The analysis presented here is based on transient system simulation program (TRNSYS) with realistic ventilation load of a large store. Design of a hybrid energy system is site specific and depends on the resources available and the load demand.

• 한국산학기술학회논문지
• /
• 제20권6호
• /
• pp.74-79
• /
• 2019

군용차량은 별도의 발전기 장착공간을 마련하지 않고 엔진과 연결되어 발전하는 엔진일체형 직렬 하이브리드 발전기를 통해 전력을 생산한다. 그러나 발전기와 엔진 간 연결 방식이 가지는 기계적 특성에 따라 내부 방청 및 윤활용 그리스가 비산하여 산화철이 발생했다. 산화철이 시동기에 고착되어 시동성능이 저하되고 기어마모에 따른 레틀 소음이 증대되는 문제가 발생하였다. 이러한 문제를 해결하기 위하여 엔진의 연결 스플라인 재질 및 표면처리를 개선하고 형상을 그리스 밀봉형으로 변경하여 내부의 산화철 발생을 방지하였다. 축계를 구성하는 발전기 연결기의 형상이 변경됨에 따라 비틀림 내구 시험을 통해 구조의 건전성을 확인하였다. 또한 실차 부하시험을 통하여 내부 부식 없이 목표한 내구수명 동안 부식이 발생하지 않음을 검증하였다. 그리스 비산 방지구조가 실제로 산화철의 발생을 억제함으로써 발전기에서 발생하는 소음을 감소시키는지 확인할 수 있었다. 본 논문은 엔진과 변속기 사이에 장착하는 직렬 하이브리드 발전기에서 발생하는 배부 부식을 방지하여 시동기의 성능저하 현상과 소음 발생 현상에 대한 근본적인 해결방안을 제시하였다고 할 수 있다.

• 한국산학기술학회논문지
• /
• 제19권7호
• /
• pp.1-8
• /
• 2018

본 논문은 주행거리 연장형 전기자동차에서 발전량을 결정하는 차량 제어기와 이를 수행하는 엔진 제어기 간 토크 명령을 전달하기 위한 새로운 통신방법을 설명한 것이다. 일반적으로 자동차는 CAN 통신방식을 사용하지만, 이 경우 기존 엔진 제어기의 하드웨어 및 소프프웨어를 수정해야만 한다. 이러한 이유로 중소 자동차 개조업체는 발전용 엔진이 탑재된 주행거리 연장형 전기자동차에 대한 개발 및 개조 작업 시 CAN통신방식의 적용이 쉽지 않다. 따라서 본 연구과정에서는 기존의 양산용 엔진 제어기를 주행거리 연장형 전기자동차에 적용하기 위한 핀-핀 통신방안를 제시하였다. 핀-핀 통신방안은 기존 양산용 엔진 제어기내에 탑재된 운전자요구토크 제어 맵을 엔진의 목표속도와 목표토크에 따른 가상 엑셀 열림량으로 변환하는 과정과 이를 기존 양산 엔진제어기가 인식 할 수 있도록 해당 엑셀페달 전압신호로 변환하는 과정으로 구성된다. 가상 엑셀 열림량은 오프라인 환경에서 역 변환 과정을 통하여 차량 최상위제어기에 제어 맵 형태로 탑재되고, 엔진 발전요구량과 엔진 최적 운전점 알고리즘을 통하여 결정된다. 이렇게 결정된 가상엑셀 열림량은 DA신호 변환기를 통하여 기존 엔진제어기가 인식할 수 있는 전압신호로 최종적으로 변환된다. 엔진토크 전달을 위한 이러한 알고리즘과 신호변환 회로는 차량제어기(VCU)에 탑재되어 엔진목표토크에 따른 가상엑셀페달 열림량 변환과정과 신호변환기를 이용한 가상 엑셀페달 전압신호에 대한 통신시험을 실시하여 이러한 통신방식의 실현 가능성을 입증하였다.

• 전기학회논문지
• /
• 제59권12호
• /
• pp.2157-2164
• /
• 2010

Microgrid is generally defined as cluster of small distributed generators, energy storages and loads. Through monitoring and coordinated control, microgrid can provide various benefits such as reduction of energy cost, peak shaving and power quality improvement. In design stage of microgrid, system dynamic simulation is necessary for optimizing of sizing and siting of DER(distributed energy resources). As number of the system components increases, simulation time will be longer. This problem can restrict optimal design. So we used simplified modeling on energy sources and average switching model on power converters to reduce simulation time. The effectiveness of this method is verified by applying to prototype microgrid system, which is consist of photovoltaic, wind power, diesel engine generators, battery energy storage system and loads installed in laboratory. Simulation by Matlab/Simulink and measurements on prototype microgrid show that the proposed method can reduce simulation time not sacrificing dynamic characteristics.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 추계학술대회 논문집
• /
• pp.480-484
• /
• 2004

Despite is product that existent higher hrust engine, ship, vehicles, development equipment and Metal Bearing for plant equipment Cast White Metal Lining Bearing that is Bimetal Bearing standing 2 generation is accomplishing master and servant and this is foreseen to be used widely on industry whole in hereafter but Cast White Metal Bearing need minuteness processing, price competitive power is depending on income from superior another thing area than itself manufacture already in advanced nation to lowdown that the technique is generalized widely.

• 전기학회논문지
• /
• 제67권4호
• /
• pp.512-521
• /
• 2018

Islands that is far away from onshore have used internal-combustion engine driving alternators to secure electric power. However, with Paris convention on climate change, there is a growing interest in eco-friendly energy independent island that replaces microgrid(MG) consisting of photovoltaic, wind power, and energy storage system with alternators for internal combustion engines. And also, national emission trading has been implemented, and the price of certified emission reduction(CER) has a influence on system marginal price(SMP). Because, the low cost generation source decides SMP when CER price is low, while the more expensive generation source decides SMP when CER price is high. Therefore, the increasing of CER price has a strong influence on the annualized return of MG independent power producer. Moreover, the fixed RPS price is implemented from 2017, which the increasing of CER price under the fixed RPS price or the variable RPS price affects annualized return differently. In this paper, the annualized return according to CER price is analyzed for large, middle, and small scaled islands, the effect of CER price on the annualized return was confirmed.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2012년도 제45회 KOSCO SYMPOSIUM 초록집
• /
• pp.363-366
• /
• 2012

Detonative combustion is considered as a promising combustion mechanism for improving thermodynamic efficiency of power generation systems as a PGC, as well as high-speed propulsion systems. Among the various types of detonative combustion, RDE is fascinated by many researchers because of the simplicity and continuos operation characteristics. Present paper is an introduction to the physical and operational concept of RDE with a brief history of RDE researches and recent development activities. Additional discussions will devoted to the relevance to the tangential mode instabilities in liquid rocket engines and improvement of liquid rocket performance.