• 한국항행학회논문지
• /
• 제8권2호
• /
• pp.105-111
• /
• 2004

최근의 무인항공기는 정찰임무를 비롯하여 무인기에 미사일을 장착하여 지대공 공격 임무를 수행하기까지 군용으로 뿐만 아니라 기상 관측, 해상 관측 등의 목적으로 폭넓게 활용하고 있으며, 점차 필요성이 높아지고 있다. 이러한 무인기는 정밀한 자세제어를 위하여 자세정보를 제공하는 AHRS와 같은 센서를 장착하는데 비용이 500만원 정도에서 고급 센서는 수 천 만원에 이르고 있다. 최근 한국항공우주연구원에서는 이러한 고가의 센서 출력정보인 자세각 정보를 사용하지 않고 각속도 정보를 기반으로 저가형 자동비행시스템을 개발하여 소형표적기와 무인표적기 비행시험을 통하여 성능을 입증하였다. 본 논문에서는 무인항공기의 항법시스템 설계를 위하여 목표로 하는 신뢰성을 충족시키면 동시에 저가형인 GPS 센서를 선택하기 위하여 Hardware in the Loop Simulation(HILS)을 통하여 GPS 출력주파수에 따른 성능을 확인하였다. 마지막으로 무인표적기에 자동비행시스템과 항법시스템을 장착하여 비행시험을 수행하였으며, 설계된 항법시스템 성능을 비행시험 결과를 통하여 확인하였다.

• 드라이브 ㆍ 컨트롤
• /
• 제16권3호
• /
• pp.51-58
• /
• 2019

The objective of this study was to investigate a simulation technology for the AM field based on ANSYS Inc.. The introduction of metal 3D printing AM process, and the examining of the present status of AM process simulation software, and the AM process simulation processor were done in the previous study (part 1). This present study (part 2) examined the use of the AM process simulation processor, presented in Part 1, through direct execution of Topology Optimization, Ansys Workbench, Additive Print and Additive Science. Topology Optimization can optimize additive geometry to reduce mass while maintaining strength for AM products. This can reduce the amount of material required for additive and significantly reduce additive build time. Ansys Workbench and Additive Print simulate the build process in the AM process and optimize various process variables (printing parameters and supporter composition), which will enable the AM to predict the problems that may occur during the build process, and can also be used to predict and correct deformations in geometry. Additive Science can simulate the material to find the material characteristic before the AM process simulation or build-up. This can be done by combining specimen preparation, measurement, and simulation for material measurements to find the exact material characteristics. This study will enable the understanding of the general process of AM simulation more easily. Furthermore, it will be of great help to a reader who wants to experience and appreciate AM simulation for the first time.

• Wind and Structures
• /
• 제29권4호
• /
• pp.247-270
• /
• 2019

Wind-resistant design of existing cooling tower structures overlooks the impacts of rainfall. However, rainstorm will influence aerodynamic force on the tower surface directly. Under this circumstance, the structural response of the super-large cooling tower (SLCT) will become more complicated, and then the stability and safety of SLCT will receive significant impact. In this paper, surrounding wind fields of the world highest (210 m) cooling tower in Northwest China underthree typical wind velocities were simulated based on the wind-rain two-way coupling algorithm. Next, wind-rain coupling synchronous iteration calculations were conducted under 9 different wind speed-rainfall intensity combinations by adding the discrete phase model (DPM). On this basis, the influencing laws of different wind speed-rainfall intensity combinations on wind-driving rain, adhesive force of rain drops and rain pressure coefficients were discussed. The acting mechanisms of speed line, turbulence energy strength as well as running speed and trajectory of rain drops on structural surface in the wind-rain coupling field were disclosed. Moreover, the fitting formula of wind-rain coupling equivalent pressure coefficient of the cooling tower was proposed. A systematic contrast analysis on its 3D distribution pattern was carried out. Finally, coupling model of SLCT under different working conditions was constructed by combining the finite element method. Structural response, buckling stability and local stability of SLCT under different wind velocities and wind speed-rainfall intensity combinations were compared and analyzed. Major research conclusions can provide references to determine loads of similar SLCT accurately under extremely complicated working conditions.

• 공업화학
• /
• 제22권2호
• /
• pp.125-132
• /
• 2011

본 연구에서는 차세대 연료전지 기술로서 일체형 재생 연료전지(Unitized Regenerative Fuel Cell, URFC)에 대하여 검토하였다. URFC는 신재생 에너지원과 연료전지의 하이브리드 시스템 구현을 목적으로 하는 필수 기술이며 21세기 수소경제 사회 완성을 위한 신기술로 평가된다. 특히 본 연구에서는 URFC 요소 기술로서 고분자 전해질 막에 대한 연구 결과를 정리하여 URFC 기술의 이해를 돕고자 하는 것이 목적이다. URFC용 고분자 전해질 막은 기능적 특성상 높은 수소이온 전도도, 치수안정성, 기계적 물성 및 계면 안정성이 요구된다. 이를 바탕으로 미래 에너지원인 수소의 생산, 저장, 이용을 일체화된 시스템으로 완성시킬 수 있는 URFC 기술은 향후 연료전지 기술과 더불어 풍력과 태양광 발전 등의 신재생 에너지 관련 기술을 함께 발전시킬 수 있는 새로운 연구 분야가 될 것으로 판단된다.

• 한국수처리학회지
• /
• 제26권6호
• /
• pp.109-115
• /
• 2018

This study was conducted to solve the water shortage problem by reclaiming urine from homes or public places and using it as cleaning water for toilets. The process used in this experiment is a chemical oxidation process combining ozone, hydrogen peroxide, and UV. We set the key substance that is to be removed as chromaticity and conducted the experiment to remove it. If the quantity or concentration of injected ozone, UV, and hydrogen peroxide is insufficient, then the chromaticity will initially increase due to low oxidizing power, and will later decrease. In addition, the efficiency of removing chromaticity appeared to be higher, depending on the quantity of ozone injected, for medium concentrated urine than highly concentrated urine. However, the absolute quantity of removed chromaticity was about 68% higher for highly concentrated urine, when 16 g/hr of ozone was injected. The higher the pH level, the reaction time and efficiency of removing chromaticity were higher, and in normal conditions, in reference to a pH of 8.55, there was a 6% difference in efficiency between a pH level of 5.05 and a pH level of 10.12. Finally, when processing urine through an ozone-only process, COD decreased steadily over time, but DOC did not decrease. This is because ozone reacts selectively with organic matter.

• 복식문화연구
• /
• 제29권1호
• /
• pp.103-120
• /
• 2021

This study interprets Siberian shaman costumes from the perspective of Siberian shamanism's spiritual culture by combining theoretical and empirical studies. According to the natural environment and language families, the Siberian people are classified into the Altai, Tungus, Ural, and Paleo-Siberian groups. Se Yin's research classifies the spiritual culture of Siberian shamanism as cosmic, spiritual, and nature view. Eliade's research has divided Siberian shaman costumes into form, headdress, and ornament. According to the present study, shaman costume form and decoration reflect the Siberian three-tiered cosmic view, such that the shaman's head, body and feet correspond to the upperworld, middleworld and underworld. In addition, animism, totemism and ancestral worship appear in the shamanism's spiritual view. For example, the costume's form shows the totem of each tribe, while the costume accessories reflect animal worship, plant worship and ancestral worship. Finally, shamanism's nature view mainly manifests through three processes: personification, deification, and ethics. As an intermediary between man and the spirits, shaman use their clothing to reproduce the image of half man and half spirit. The shaman's costumes are deified and considered to have divine power. For example, the animals represented on the costume help the shaman travel through space. Generally, good animals help a shaman enter the upperworld, while animals that help a shaman enter the underworld are considered evil. Also, the number of hanging accessories represents the shaman's ability.

• Design & Manufacturing
• /
• 제14권4호
• /
• pp.71-77
• /
• 2020

Various manufacturing technologies, including over-molding and insert-injection molding, are used to produce hybrid plastics and metals. However, there are disadvantages to these technologies, as they require several steps in manufacturing and are limited to what can be reasonably achieved within the complexities of part geometry. This study aims to determine a practical approach for producing metal/plastic hybrid components by combining plastic injection molding and metal die casting to create a new hybrid metal/plastic molding process. The integrated metal/plastic hybrid injection molding process developed in this study uses the proven method of multi-component technology as a basis to combine plastic injection molding with metal die casting into one integrated process. In this study, the electrical conductivity and ampacity were verified to qualify the new process for the production of parts used in electronic devices. The electrical conductivity was measured, contacting both sides of the test sample with constant pressure, and the resistivity was measured using a micro ohmmeter. Also, the specific conductivity was subsequently calculated from the resistivity and contact surface of the conductor path. The ampacity defines the maximum amount of current a conductive path can carry before sustaining immediate or progressive deterioration. The manufactured hybrid multi-components were loaded with increasing currents, while the temperature was recorded with an infrared camera. To compare the measured infrared images, an electro-thermal simulation was conducted using commercial CAE software to predict the maximum temperature of the power loaded parts. Overall, during the injection molding process, it was demonstrated that multifunctional parts can be produced for electric and electronic applications.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제16권9호
• /
• pp.3194-3210
• /
• 2022

Wall obstruction is the main factor leading to the non-line of sight (NLoS) error of indoor localization based on received signal strength indicator (RSSI). Modeling and correcting the path loss of the signals through the wall will improve the accuracy of RSSI localization. Based on electromagnetic wave propagation theory, the reflection and transmission process of wireless signals propagation through the wall is analyzed. The path loss of signals through wall is deduced based on power loss and RSSI definition, and the theoretical model of path loss of signals through wall is proposed. In view of electromagnetic characteristic parameters of the theoretical model usually cannot be accurately obtained, the statistical model of NLoS error caused by the signals through the wall is presented based on the log-distance path loss model to solve the parameters. Combining the statistical model and theoretical model, a hybrid model of path loss of signals through wall is proposed. Based on the empirical values of electromagnetic characteristic parameters of the concrete wall, the effect of each electromagnetic characteristic parameters on path loss is analyzed, and the theoretical model of regional path loss of signals through the wall is established. The statistical model and hybrid model of regional path loss of signals through wall are established by RSSI observation experiments, respectively. The hybrid model can solve the problem of path loss when the material of wall is unknown. The results show that the hybrid model can better express the actual trend of the regional path loss and maintain the pass loss continuity of adjacent areas. The validity of the hybrid model is verified by inverse computation of the RSSI of the extended region, and the calculated RSSI is basically consistent with the measured RSSI. The hybrid model can be used to forecast regional path loss of signals through the wall.

• Earthquakes and Structures
• /
• 제22권2호
• /
• pp.121-135
• /
• 2022

Many public buildings such as schools, hospitals, etc., where partial infill walls are present in reinforced concrete (RC) structures, have undergone undesirable damage/failure attributed to captive column effect during a moderate to severe earthquake shaking. Often, the situation gets worsened when these RC frames are non-ductile in nature, thus reducing the deformable capability of the frame. Also, in many parts of the Indian subcontinent, it is mandatory to use fly-ash bricks for construction so as to reduce the burden on the disposal of fly-ash produced at thermal power plants. In some scenario, when the non-ductile RC frame, partially infilled by fly-ash bricks, suffers major structural damage, the challenge remains on how to retrofit and restore it. Thus, in this study, two full-scale one-bay, one-story non-ductile RC frame models, namely, bare frame and RC partially infilled frame with fly-ash bricks in 50% of its opening area are considered. In the previous experiments, these models were subjected to slow-cyclic displacement-controlled loading to replicate damage due to a moderate earthquake. Now, in this study these damaged frames were retrofitted and an experimental investigation was performed on the retrofitted specimens to examine the effectiveness of the proposed retrofitting scheme. A hybrid retrofitting technique combining epoxy injection grouting with an innovative and easy-to-implement steel jacketing technique was proposed. This proposed retrofitting method has ensured proper confinement of damaged concrete. The retrofitted models were subjected to the same slow cyclic displacement-controlled loading which was used to damage the frames. The experimental study concluded that the hybrid retrofitting technique was quite effective in enhancing and regaining various seismic performance parameters such as, lateral strength and lateral stiffness of partially fly-ash brick infilled RC frame. Thus, the steel jacketing retrofitting scheme along with the epoxy injection grouting can be relied on for possible repair of the structural members which are damaged due to the captive column effect during the seismic shaking.

• 품질경영학회지
• /
• 제50권4호
• /
• pp.793-810
• /
• 2022

Purpose: As improving the search performance of aviation security equipment is considered essential, this study proposes the need for research on how to find an optimized test sequence that can reduce test time and operator power during the search function test of explosive detection systems. We derive the weights and work difficulty adjustment factor required to find the optimized test order. Methods: First, after setting the test factors, the time of each test and the difficulty scale determined by the worker who performed the test directly were used to derive weights. Second, the work difficulty adjustment coefficient was determined by combining the basic weight adjustment factor and corresponding to the body part used by the test using objective rating. Then the final standard time was derived by calculating the additional weights for the changeability of the test factors. Results: The order in which the final standard time is minimized when 50 tests are performed was defined as the optimized order. 50 tests should be conducted without duplication and the optimal order of tests was obtained when compared to previously numbered tests. As a result of minimizing the total standard time by using Excel's solver parameters, it was reduced by 379.14 seconds, about 6.32 minutes. Conclusion: We tried to express it in mathematical formulas to propose a method for setting an optimized test sequence even when testing is performed on other aviation security equipment. As a result, the optimal test order was derived from the operator's point of view, and it was demonstrated by minimizing the total standard time.