• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2019년도 전력전자학술대회
• /
• pp.380-381
• /
• 2019

This paper presents a grid voltage-sensorless current control design for an LCL-filtered grid-connected inverter with the purpose of enhancing the reliability and reducing the total cost of system. A disturbance observer based on the gradient steepest descent method is adopted to estimate the grid voltages with high accuracy and light computational burden even under distorted grid conditions. The grid fundamental components are effectively extracted from the estimated gird voltages by means of a least-squares algorithm to facilitate the synchronization process without using the conventional phase-locked loop. Finally, the estimated states of inverter system obtained by a discrete current-type full state observer are utilized in the state feedback current controller to realize a stable voltage-sensorless current control scheme. The effectiveness of the proposed scheme is validated through the simulation results.

• 무역학회지
• /
• 제47권4호
• /
• pp.15-33
• /
• 2022

This study is to investigate multilateral environmental agreements,mainly UNFCCC on the primary export industry of Korea and to make a policy recommendation. Mostly literature reviews are focused on the traditional multilateral environmental agreements and the for the most part analysis are conducted prior to the Paris agreement. The result of survey indicates that many companies have not yet felt burden on their business due to UNFCCC(decarbonization) and have monitored the related policies. But the companies ask the government for strong incentives. The paper implies that enforcing strong government incentives, upgrading usage of the nuclear power, improving the related government legislation, setting up the special task force team with government and private sectors are needed.

• 한국전자파학회논문지
• /
• 제16권11호
• /
• pp.1123-1130
• /
• 2005

본 논문에서는 PAPR 저감 기법인 SPW(Sub-block Phase Weighting) 기법에서 PAPR(Peak-to-Average Power Ratio)이 저감되도록 조절한 부가 정보를 처리하는 방법을 제안한다. SPW기법은 입력 데이터를 여러 개의 서브블록으로 나누고 위상 회전 벡터를 곱해주는 것으로 피크 전력을 줄여준다. SPW 기법은 부반송파 수와 변조방식, 서브 블록의 수가 PTS 기법과 같을 때 서로 유사한 점을 지니고 있지만, 오직 한 개의 IFFT(Inverse Fast Fourier Transform)를 사용한다는 점에서 기존의 PTS(Partial Transmit Sequence)나 SLM(Selected Mapping) 기법과는 다르다. SPW기법은 비록 PAPR을 효율적으로 줄일 수 있지만 계산 복잡도 문제는 여전히 존재한다. 본 논문에서는 위상 조절을 위 한 방법으로서 flipping 알고리즘과 full iteration 알고리즘을 사용하였다. 컴퓨터 시뮬레이션을 통하여 제안 방식의 특성을 분석하고 성능을 검토하였다.

• 전기전자학회논문지
• /
• 제24권2호
• /
• pp.385-391
• /
• 2020

배전계통에서의 과전류 및 이상 전압 현상은 전력설비에 부담을 줄 뿐만 아니라 수용가에 치명적인 피해를 입힐 수 있다. 그로 인해 실시간 배전계통 시뮬레이터를 활용하여 신속한 고장처리와 정전구간 축소 및 고장복구를 통한 전력공급의 신뢰도를 높이는 배전자동화 관련 연구가 활발히 진행되고 있다. 기존의 디지털 시뮬레이터를 이용한 배전계통 모의시스템은 고가의 설비로 시스템 구축에 제약이 있고 실 배전계통을 통한 검증 또한 불가능하다. 본 논문에서는 배전계통 디지털 시뮬레이터의 계통해석결과를 기반으로 배전자동화용 단말장치와의 연동을 통해 실시간 시뮬레이션 및 기능검증이 가능한 시스템을 개발하였다. 제안한 시스템의 효용성은 실험을 통해 검증하였다.

• 한국전자파학회논문지
• /
• 제29권10호
• /
• pp.791-798
• /
• 2018

CFAR(Constant False Alarm Rate)는 레이다 시스템에서 표적 탐지에 주요 사용된다. 그 중에서 OS(Ordered Statistic) CFAR는 비균일 잡음환경에서 사용된다. 그러나 OS CFAR는 참조 셀을 오름차순으로 정렬하여 임계값을 계산하므로 많은 연산량이 필요하다. 이로 인하여 실시간 적용에 어려움이 있다. 본 논문에서는 OS CFAR의 연산량을 줄이는 방안을 서술한다. 단순 표적 유무만 판단하기 위하여 참조 셀들을 오름차순 정렬하는 대신 참조 셀과 크기 비교하는 방식으로 수행하였다. 그리고 3개의 테스트 셀을 묶어 구역을 나누고, 구역 내에서 공통 참조 셀을 구하였다. 공통 참조 셀과 테스트 셀과의 크기 비교를 우선 수행함으로써 연산시간을 단축한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.12-14
• /
• 2004

We investigated current limiting characteristics of the flux-lock type high-Tc superconcting fault current limiter(HTSC-FCL) according to fault angles. The Flux-lock type HTSC-FCL consists of primary and the secondary copper coils that are wound in parallel each other through the iron core and YBCO thin flim. In this paper, the current limiting characteristics of the flux-lock type HTSC-FCL according to fault angles in case of the subtractive and additive polarity windings were compared and analyzed. From the results, the flux-lock type HTSC-FCL could limit more quickly fault current as the fault angles increased irrespective of the fault angles. On the other hand, the initial power burden of HTSC element after a fault happened increased as the fault angles increased. In addition, it was confirmed that the resistance of flux-lock type HTSC-FCL in case of subtractive polarity winding was more increased than that of additive polarity winding and that the peak current of fault current in case of subtractive polarity winding was larger than that of the additive polarity winding case.

• 한국안전학회지
• /
• 제29권1호
• /
• pp.47-53
• /
• 2014

The application of advanced Main Control Room(MCR) is accompanied with lots of changes and different forms and features through the virtue of new digital technologies. The characteristics of these digital technologies and devices give many opportunities to the interface management, and can be integrated into a compact single workstation in advanced MCR so that workers can operate the plant with minimum physical burden under any operation conditions. However, these devices may introduce new types of human errors and thus a means to evaluate and prevent such errors is needed, especially those related to characteristics of digital devices. This paper reviewed the new type of human error hazards of tasks based on digital devices and surveyed researches on physiological assessment related to human error. An experiment was performed to verify human error hazards by physiological responses such as EEG which was measured to evaluate the cognitive workload of operators. And also, the performances of four tasks which are representative in human error hazard tasks based on digital devices were compared. Response time, ${\beta}$ power spectrum rate of each task by EEG, and mental workload by NASA-TLX were evaluated. In the results of the experiment, the rate of the ${\beta}$ power was increased in the task 1 and task 4 which are searching and navigating task and memory task of hierarchical information, respectively. In case of the mental workload, in most of evaluation items, task 1 and 4 were highly rated comparatively. In this paper, human error hazards might be identified by highly cognitive workload. Conclusively, it was concluded that the predictive method which is utilized in this paper and an experimental verification can be used to ensure the safety when applying the digital devices in Nuclear Power Plants (NPPs).

• 한국농공학회논문집
• /
• 제61권4호
• /
• pp.63-73
• /
• 2019

Coastal and fishing facilities are gradually deteriorating in function due to the continual accumulation of soil sediments, which has affected local economic activities. Currently, there are many methods to remove soil sediments, but these methods are either a temporary solution or require a repetitive removal of the soil sediments, which is a huge financial burden for the maintenance of the facilities. To solve these problems, this study proposed a non-power soil cleaning system and evaluated field applicability by carrying out field model tests. The conditions for the evaluation focused on the drainage-elapsed time and drainage-outflow velocity according to the water level change in the water tank. In the field test, silty clay and sand were separately installed, and sedimentation soil removal test was practiced. As a result, the system was verified to have a sufficient outflow velocity for the removal of soil sediments. In addition, a generalization equation that can be used in different regions of the tide was suggested in this study. These results will greatly contribute to removing soil sediments in ports and dike gate facilities on the southwest coast. Since the system is an eco-friendly technology that does not require additional energy, thus it is expected to contribute to maintenance of sustainable facility performance as well as economic effect in the future.

• 정보보호학회논문지
• /
• 제13권4호
• /
• pp.85-98
• /
• 2003

현재 co-processor를 탑재한 IC 칩이 계속 출시되고 있어 IC 칩의 연산 능력이 나날이 발전하고 있다. 또한, 무선 단말기 시장에는 간편하고 다양한 서비스를 제공하기 위해 IC 칩(Integrated Circuit Chip)을 내장한 무선 단말기 제품이 많이 출시되고 있다. 하지만 현재 IC 칩에 탑재된 co-processor의 연산 능력은 아직 유선 통신 환경의 연산 능력에 미치지 못하고 있어 기존 유선 통신 환경의 키 분배 프로토콜을 무선 통신 환경에 그대로 활용하기 어렵다. 따라서 본 논문에서는 무선 단말기의 제한적인 연산 능력을 고려하여 암호 전용 연산을 하는 co-processor를 무선 단말기에 탑재함으로써 연산 능력을 보완하고, 기존의 이동 통신 환경에서의 키 분배 프로토콜에서 제공하지 않는 보안 요구 사항을 만족하며, 사용자와 서버 양측에 연산 부담을 줄일 수 있는 무선 단말기 환경에 적합한 키 분배 프로토콜을 제안한다.

• 한국산업융합학회 논문집
• /
• 제25권3호
• /
• pp.433-441
• /
• 2022

In general, in an emergency generator system for an electric facility including an induction motor load, an emergency power generation facility larger than the facility load capacity is built due to the initial starting current of the induction motor. In order to reduce this economic burden, various methods to reduce the inrush current of induction motors are applied to suppress the additional expansion of generators due to the reduction of power generation facilities and the increase in electrical facilities. Among these methods, when a system with a built-in soft start function of an induction motor using an inverter is built, it is the best way to reduce the inrush current of the induction motor to less than the rated current. However, in this case, the installation cost of the inverter to drive the induction motor increases. This paper proposes a soft start method of an induction motor by expanding the frequency and voltage control operation area of an emergency generator. In addition, proposed a speed calculation method based on power factor information, which is essential information for stable soft start of an induction motor, and a method for generating a speed command value of the governor for starting with maximum torque.