• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.3
• /
• pp.251-257
• /
• 2004

AIS(Automatic Identification System), was suggested for the navigational data communication between ships and between ships and shore stations for the better safety of navigation, and it requires two different the transmitting output power level depending on its operating mode. According to ITU's recommendation, these levels should reach within 20 % of its final value in 1 ms. In this paper, an adequate feedback control circuit for power amplifier module is designed and implemented.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2003.11a
• /
• pp.669-679
• /
• 2003

Through AIS(Automatic Identification System), ITU-R suggested the navigational data communication between ships and between ships and shore stations for the better safety of navigation, and it requires two different the transmitting output power level depending on its operating mode. According to ITU's recommendation, these levels should reach within 20% of its final value in 1ms. In this paper, an adequate feedback control circuit for power amplifier module is designed and implemented.

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.8
• /
• pp.849-853
• /
• 2014

In micro-scale electromechanical systems, the power to perform accurate position sensing often greatly exceeds the power needed to generate motion. This paper explores the implications of sampling rate and amplifier noise density selection on the performance of a system identification algorithm using a capacitive sensing circuit. Specific performance objectives are to minimize or limit convergence rate and power consumption to identify the dynamics of a rotary micro-stage. A rearrangement of the conventional recursive least-squares identification algorithm is performed to make operating cost an explicit function of sensor design parameters. It is observed that there is a strong dependence of convergence rate and error on the sampling rate, while energy dependence is driven by error that may be tolerated in the final identified parameters.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.401-406
• /
• 2004

In this paper, a new time-domain adaptive predistortion scheme is proposed to compensate for the nonlinearity of high power amplifiers (HPA) in OFDM systems. A complex Wiener-Hammerstein model (WHM) is adopted to describe the input-output relationship of unknown HPA with linear dynamics, and a power series model with memory (PSMWM) is used to approximate the HPA expressed by WHM. By using the PSMWM, the compensation input to HPA is calculated in a real-time manner so that the linearization from the predistorter input to the HPA output can be attained even if the nonlinear input-output relation of HPA is uncertain and changeable. In numerical example, the effectiveness of the proposed method is confirmed and compared with the identification method based on PSMWM.

• Journal of Power System Engineering
• /
• v.13 no.4
• /
• pp.68-73
• /
• 2009

The mathematical model has a different response character with the real system because this mathematical model has the modeling errors and the imprecise value of system's parameters. Therefore to find the value of system parameters as possible as near by real value in the model is necessary to design the controlled system. This study concern about the identification method to estimate the parameter for the magnetic bearing system with RCGA(Real Coded Genetic Algorithm). Firstly, we will get the mathematical model from the current amplifier circuit and the magnetic bearing system. Secondly we will get the step response data in this circuit and system. Finally, we will estimate the unknown parameter's value from the data.

• Journal of Sensor Science and Technology
• /
• v.25 no.5
• /
• pp.337-343
• /
• 2016

In this paper, we newly introduce a wireless identification system using a solar cell and RF transceivers. The reader sends interrogating signal to a transponder using LED visible light, and the transponder responds to the reader using RF signal. The transponder consists of a solar cell, an amplifier, a microprocessor, and an RF transmitter. The solar cell receives the visible light from the reader and generates current to supply electric power to the other devices in the transponder. At the same time, the solar cell detects interrogating signal in the reader light. The microprocessor senses the interrogating signal and generates a responding signal. The RF transmitter radiates the responding signal to the reader. The transponder is a passive circuit because it operates without external power. In experiments, the maximum read distance between a reader and a transponder was about 1.6 meter.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.4
• /
• pp.761-767
• /
• 2007

In this paper, we deal wih a concurrent dual band low noise amplifier for a Radio Frequency Identification(RFID) reader operating at 912MHz and 2.45GHz. The design of the low noise amplifier is based on the TSMC $0.18{\mu}m$ CMOS technology. The chip size is $1.8mm\times1.8mm$. To improve the noise figure of the circuit, SMD components and a bonding wire inductor are applied to input matching. Simulation results show that the 521 parameter is 11.41dB and 9.98dB at 912MHz and 2.45GHz, respectively The noise figure is also determined to 1.25dB and 3.08dB at the same frequencies with a power consumption of 8.95mW.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.2 s.173
• /
• pp.355-361
• /
• 2000

In this study, active control magnetic actuator for reducing vibration of rotor system is performed. Identification, modeling, simulation, control system design, and evaluation of active magnetic damper system have been researched. Power amplifier modeling, connected magnetic actuator and augmented by system identification, is included to establish a magnetic damper simulation which provides close performance correspondence to the physical plant. A magnetic actuator, digital controller using DSP(Digital Signal Processor), and bipolar operational power supply/amplifiers are developed to show the effectiveness of reducing rotor vibration. Also the curve fitting procedure to obtain the transfer function of frequency dependent components is developed. Two kinds of test are executed as sliding and oil bearing. Results presented in this paper will provide a well-defined technical parameters in designing magnetic damper system for the proposed rotor.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.264-265
• /
• 2007

In this paper, we deal with a hybrid dual band low noise amplifier with tunable matching circuits for a Radio Frequency Identification(RFID) reader operating at 433MHz and 912MHz. The tunable matching circuit consists of the microstrip line, SMD component and varactor. Simulation results show that the S21 parameter is 17dB and 7.91dB at 433MHz and 912MHz, respectively. The noise figure is also determined to 3.56dB and 5.58dB at the same frequencies with a power consumption of 19.36mW.

• Proceedings of the IEEK Conference
• /
• 2000.09a
• /
• pp.51-54
• /
• 2000

차세대 초고속 무선 전송을 위한 OFDM (orthogonal frequency division multiplexing) 방식에서는 전송 신호의 진폭이 큰 PAPR (peak-to-average power ratio)을 갖게 되어 송신기에서 사용되는 고출력 증폭기의 비선형성에 의해 큰 왜곡을 받게 된다. 이러한 왜곡의 보상을 위하여 우리는 고정점 반복 (fixed point iteration)에 기반한 사전왜곡기 (predistorter)를 제안하였으나, 이는 고출력 증폭기의 특성이 변화하지 않는다는 가정에서 구현되었다. 본 논문에서는 구간 선형 근사에 기반하여 고출력 증폭기의 시변 특성을 추종하는 새로운 기법과 이렇게 근사된 고출력 증폭기 특성을 이용하는 적응적인 고정점 반복 사전왜곡기의 구현을 제안한다. 모의실험 결과, 제안된 고출력 증폭기 근사 방법은 랜덤한 증폭기 특성 변화를 매우 효과적으로 추종하며 이러한 근사 결과를 이용한 고정점 반복 사전왜곡기는 우수한 성능을 보임을 확인하였다.