• 대한전기학회논문지:전력기술부문A
• /
• 제49권7호
• /
• pp.332-338
• /
• 2000

In this paper, a robust nonlinear excitation controller is proposed to achieve both voltage regulation and system stability enhancement for single machine-infinite power systems. The proposed method employs backstepping technique and combines this with an adaptation algorithm for estimating the effective reactance of transmission line, thereby leading to adaptive nonlinear control. Simulation results show that power that angle stabilization as well as voltage regulation is achieved in a satisfactory manner, regardless of the system operating conditions and system structure.

• 전기학회논문지
• /
• 제64권5호
• /
• pp.661-666
• /
• 2015

This paper proposes a method for solving running cost problem by minimizing switching reactive power compensation devices. An objective function was modeled by calculating the weighting value of cost, and a solution was derived using ILP. This paper suggests optimal coordinative control method between FACTS, Shunt Reactors, Capacitors and OLTC. Therefore, it is valuable for decision maker in determining order and capacity of devices which gaining a voltage stabilization. As a result, the objectives of voltage stabilization and cost minimization were achieved simultaneously. This realizes the economic efficiency of the system. We start by showing how to solve systems of linear equations using the language of pivots and tableaus. The effectiveness of this technique is demonstrated in modified PSS/E MIGUM 45 bus system. The simulation results show the effectiveness of this algorithm by comparing the outcome withseveral established methods.

• 전력전자학회논문지
• /
• 제26권5호
• /
• pp.307-314
• /
• 2021

Even though the LCL filters have superior harmonic attenuation ability to L filters, stability has always been an issue. The system could be unstable because of the resonance phenomenon, especially when digital controller is used. Adding a notch filter to the compensator is one approach to solve the problem. Resonance phenomenon can be inhibited by aligning notch frequency to system resonance frequency. However, resonance frequency variation can be obtained because the actual system has a nonstationary characteristic. Therefore, the system could be unstable, where the system parameters are changed when the conventional notch filter is used. An adaptive digital notch filter that stabilizes the system even system parameters are changed. Simulation and experiment results are provided to verify the validity of the proposed adaptive filter.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.665-670
• /
• 2005

This paper introduces the propulsion system(Motor Block) stabilization test result for Korean High Speed Railway(HSR). The developed propulsion system using high power semiconductor, IGCT(Integrated Gate Commutated Thyristor) consists of two PWM converter and VVVF inverter. In this paper, overall configuration of propulsion system is briefly described and stabilization tests are made to verify the developed propulsion system. The presented test results shows beatless control method of inverter output current at the 200km/h and performance test of BCH.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 A
• /
• pp.226-228
• /
• 2005

This paper deals with power system stabilization problem using a network control system in which the control is applied through a communication channel in feedback form. Analysis and synthesis issues are investigated by modeling the packet delivery characteristics of the network as a Bernoulli random variable, which is described by a two state Markov chain. This model assumption yields an overall system which is described by a discrete-time Markov jump linear system. These employ the norm to measure the performance of the system, and they compute the norm via a necessary and sufficient matrix inequality condition.

• Journal of Platform Technology
• /
• 제12권2호
• /
• pp.34-44
• /
• 2024

본 논문은 모바일 장치에 장착된 충전식 배터리의 사용 시간을 연장하기 위하여 모바일 장치에서 전력 소모 비율을 가장 많이 차지하는 센싱 시스템의 전력 소모를 최소화하는 동적 클럭 공급 제어 알고리즘과 시스템 부하 전력 안정화 알고리즘을 제안하였다. 동적 클럭 공급 제어알고리즘은 센싱 시스템의 전력을 차단할 수 있도록 회로를 구성하여 센싱하지 않는 시간에는 전력을 차단하고 센서 변화율이 낮은 상태를 인지하여 측정 주기를 조정하는 방법으로 센싱 시스템에 소모되는 전력을 감소시킬 수 있다. 시스템 부하 전력 안정화 알고리즘은 전력 소모 상태에 따라 주변 모듈의 전력을 제어하는 알고리즘으로 많은 전력을 요구하는 상황일 경우 클럭 공급을 제어하여 동작 안정화 작업을 수행한다. 실험 결과, 동적 클럭 공급 제어 알고리즘만을 적용하는 경우 센싱 시스템에서 소모되는 전력을 17% 감소시키는 효과를 확인하였고, 시스템 부하 전력 안정화 알고리즘만을 적용하는 경우 9.3%의 전력 소모를 감소시켜 영상 처리와 같은 많은 전력을 요구하는 상황에서 안정적으로 동작할 수 있었다. 두 가지 알고리즘을 모두 적용하는 경우 배터리의 전력 소모가 알고리즘을 적용하기 전보다 67% 감소하였다. 이를 통해 제안한 방법의 신뢰성을 확인하였다.

• 전력전자학회논문지
• /
• 제20권2호
• /
• pp.130-136
• /
• 2015

This study describes the structure and operation modes of vertical stabilization (VS) converter for international thermonuclear experimental reactor (ITER) and proposes a protection method. ITER VS converter supplies voltage (${\pm}1000V$)/current (${\pm}22.5kA$) to superconducting magnets for plasma current vertical stabilization. A four-quadrant operation must be achieved without zero-current discontinuous section. The operation mode of the VS converter is separated in 12-pulse mode, 6-pulse mode and circulation current mode according to the magnitude of the load current. Protection measures, such as bypass and discharge, are proposed for abnormal conditions, such as over current, over voltage, short circuit, and voltage sag. VS converter output voltage is controlled to satisfy voltage response time within 20 msec. Bypass operation is completed within 60 msec and discharge operation is performed successfully. The feasibility of the proposed control algorithm and protection measure is verified by assembling a real controller and implementing a power system including the VS converter in RTDS for a hardware-in-loop (HIL) facility.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 A
• /
• pp.84-86
• /
• 2005

Adaptive tracking, disturbance rejection and power system stabilizer. First, this paper deals with power system stabilization problem using asymptotic tracking of arbitrary smooth bounded reference output signals, with simultaneous rejection of disturbances generated by an unknown linear exosystem. Second, this paper presents a power system stabilizer(PSS) using nonlinear adaptive observer backstepping controller.

• Journal of Power Electronics
• /
• 제17권2호
• /
• pp.570-578
• /
• 2017

This paper proposes a method to stabilize the output voltage of the secondary side of an Inductive Power Transfer (IPT) system through tuning/detuning via a serial tuned DC Voltage-controlled Variable Capacitor (DVVC). The equivalent capacitance of the DVVC changes with the conduction period of a diode in the DVVC controlled by DC voltage. The output voltage of an IPT system can be made constant when this DVVC is used as a variable resonant capacitor combined with a PI controller generating DC control voltage according to the fluctuations of the output voltage. Since a passive diode instead of an active switch is used in the DVVC, there are no active switch driving problems such as a separate voltage source or gate drivers, which makes the DVVC especially advantageous when used at the secondary side of an IPT system. Moreover, since the equivalent capacitance of the DVVC can be controlled smoothly with a DC voltage and the passive diode generates less EMI than active switches, the DVVC has the potential to be used at much higher frequencies than traditional switch mode capacitors.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.368-371
• /
• 1996

This paper describes a study on the developments of the high power brushless DC(BLDC) servo system for electric gun/turret drive system. The servo control unit including the DSP based digital servo unit, power amplifier, signal conditioning circuit, internal power circuit is designed and implemented for driving the 10hp BLDC servo system. The developed system is applied to the gun/turret drive & stabilization simulator system and the control performance is verfied through the experiments.