• Title/Summary/Keyword: Power System Control and Operation

검색결과 1,997건 처리시간 0.036초

신경회로망을 이용한 IPMSM의 효율 최적화 제어 (Efficiency Optimization Control of IPMSM using Neural Network)

  • 최정식;고재섭;정동화
    • 조명전기설비학회논문지
    • /
    • 제22권1호
    • /
    • pp.40-49
    • /
    • 2008
  • IPMSM 드라이브는 하중 비에 대한 출력이 우수하여 전기자동차 등 응용분야에서 관심이 증가하고 있다. 이러한 응용분야에서 최대 효율을 얻기 위하여 본 논문은 신경회로망 제어기법을 제시한다. 동손과 철손으로 구성된 제어가능한 전기적 손실은 신경회로망의 오류 역전파 알고리즘(EBPA)를 이용하여 최소화시킬 수 있다. 손실의 최소화는 IPMSM 드라이브의 효율 최적화 제어를 가능하게 한다. 본 논문에서는 신경회로망의 EBPA를 이용하여 전동기 구동에 대하여 d축 인덕턴스, 전기자 저항, 역기전력 상수 변화와 같은 파라미터 변동을 시간으로 계산하여 고성능 및 강인성 제어를 제시한다. 제시한 알고리즘은 IPMSM 드라이브 시스템에 적용하고 효율최적화 제어에 의해 제어된 동작특성을 분석하여 논문의 타당성을 입증한다.

전류 분배 특성이 향상된 드룹 방법에 관한 연구 (A Study on the Droop Method with Improved Current Distribution Characteristics)

  • 장바울
    • 전기전자학회논문지
    • /
    • 제23권3호
    • /
    • pp.785-792
    • /
    • 2019
  • 다중 컨버터 모듈을 병렬 운전 시, 시스템의 신뢰성 향상을 위해 모듈 간 균등한 전력 분배가 이루어져야 한다. 본 논문에서는 기존의 드룹 제어 방법을 개선하여 전류 분배 특성이 향상된 개선된 드룹 제어 방법을 제시한다. 제안하는 방법에서는 각 모듈의 전류가 설정값보다 커질 경우, 출력 전압 설정값을 상향 조정하여 모듈 간 전류 분배 특성이 개선되도록 한다. 한편, 출력 전압을 공차 범위 안에서 관리하고자 할 때, 출력 전압 설정값이 항상 상향 조정된다면 이용 가능한 제어 IC 기준값($v_{ref}$)의 범위가 줄어들게 된다. 따라서 상향 조정으로 인해 모듈 간 출력 전압 설정값이 역전될 경우 하향 조정을 통해 이를 해결하고자 하였다. 제안하는 방법은 2개의 부스트 컨버터 모듈로 구성된 17.5V/500mA급 프로토타입을 통해 실험으로 검증하였다.

단기 물 수요예측 시뮬레이터 개발과 예측 알고리즘 성능평가 (Development of Water Demand Forecasting Simulator and Performance Evaluation)

  • 신강욱;김주환;양재린;홍성택
    • 상하수도학회지
    • /
    • 제25권4호
    • /
    • pp.581-589
    • /
    • 2011
  • Generally, treated water or raw water is transported into storage reservoirs which are receiving facilities of local governments from multi-regional water supply systems. A water supply control and operation center is operated not only to manage the water facilities more economically and efficiently but also to mitigate the shortage of water resources due to the increase in water consumption. To achieve the goal, important information such as the flow-rate in the systems, water levels of storage reservoirs or tanks, and pump-operation schedule should be considered based on the resonable water demand forecasting. However, it is difficult to acquire the pattern of water demand used in local government, since the operating information is not shared between multi-regional and local water systems. The pattern of water demand is irregular and unpredictable. Also, additional changes such as an abrupt accident and frequent changes of electric power rates could occur. Consequently, it is not easy to forecast accurate water demands. Therefore, it is necessary to introduce a short-term water demands forecasting and to develop an application of the forecasting models. In this study, the forecasting simulator for water demand is developed based on mathematical and neural network methods as linear and non-linear models to implement the optimal water demands forecasting. It is shown that MLP(Multi-Layered Perceptron) and ANFIS(Adaptive Neuro-Fuzzy Inference System) can be applied to obtain better forecasting results in multi-regional water supply systems with a large scale and local water supply systems with small or medium scale than conventional methods, respectively.

차세대 검침 기반구조를 위한 스마트 미터 집중기 제어 프로토콜의 구현과 성능분석 (Implementation and Performance Evaluation of the Smart Meter Concentrator Control Protocol for Advanced Metering Infrastructure)

  • 장순건;최인지;박병석;김영현;윤종호
    • 대한전자공학회논문지TC
    • /
    • 제48권3호
    • /
    • pp.41-49
    • /
    • 2011
  • 본 논문에서는 스마트 전력량계 집중장치와 검침서버간에 사용할 수 있는 개방형 프로토콜을 제안하고 성능을 분석하였다. 기존의 집중장치는 DLMS/COSEM 표준프로토콜 기반에서 스마트 전력량계에 대한 연결설정 및 데이터 수집절차를 수행한다. 하지만 수집된 자료를 전달할 때 필요한 집중장치와 검침서버간에는 표준화된 프로토콜이 없어 제품마다 다양한 방식으로 구현되고 있다. 본 논문에서는 집중장치와 검침서버간의 프로토콜로 기존의 DLMS/COSEM 표준프로토콜을 확장한 개방형 프로토콜인 Smart Meter Concentrator Control Protocol(SMCCP)를 제안하였다. 이것은 집중장치로 하여금 검침서버를 대신하여 검침자료를 수집할 수 있는 프록시모드 뿐만 아니라 검침서버와 전력량계간의 직접 통신이 가능한 릴레이모드도 설정하고 자료를 수집할 수 있는 기능을 제공하도록 설계된 것이다. 본 논문에서는 이의 동작을 실증할 수 있는 에뮬레이터 및 프로토콜 분석도구를 구현하였다. 또한 각 모드에 대한 동작과 성능을 평가하기 위하여 OMNET++기반의 시뮬레이터를 구현하여 모드별 평균세션유지시간 및 통신링크 점유율을 측정하고 비교하였다.

대형할인매장의 VMI 시스템을 위한 효율적인 재고관리 시스템 (Efficient Deterministic Inventory System in VMI System of the Discount Retailer)

  • 백시현;방인홍;김내헌
    • 한국경영과학회:학술대회논문집
    • /
    • 대한산업공학회/한국경영과학회 2000년도 춘계공동학술대회 논문집
    • /
    • pp.139-142
    • /
    • 2000
  • Excessive inventories result from poor scheduling, planning, and controls, and the converse is also same. With adequate inventories, supplies can transport products to customers in time without excessive delivering cost. So efficient inventory control is vital for successful logistics management operation. In terms of mass discount retailers such as Wal-Mart, Carrefour, E-Mart, and so on, they require the high-quality services such as a small-amount and a high-frequency delivery because of having small warehouse and wanting possess much more various goods. In the opposite, manufactures ask mass discount retailer to delivery more lots of goods because of reducing the number of deliveries. It goes without saying that both wish to prevent stockout(lack of inventories). Usually, mass discount retailers have the power more than manufactures. This paper proposed how to manage inventory and how many to order in view of the TPLC and supplier. We considered the economic order quantity models for multiple items so as to prevent urgent deliveries as possible as. And the tradeoff stockout costs and delivering costs.

  • PDF

2레벨용 부스트 컨버터를 이용한 소형풍력발전기 제동장치 설계에 관한 연구 (A Study on Design of Control Device on Small Wind Generator Using 2-Level Boost Converter)

  • 문채주;장영학;소순열;박태식;정문선;윤영천
    • 전기학회논문지
    • /
    • 제62권10호
    • /
    • pp.1481-1486
    • /
    • 2013
  • The small wind generator with existing mechanical control system has a frequent failure and malfunction, and its maintenance is difficult. In this paper, an electric control method using a boost converter for small wind generator was suggested. The suggested 2-level boost converter control device was manufactured and its experimental operation were conducted on a wind generator with 200 [W] capacity. As a result of experimental device, the control by a boost converter was executed at the point that the output voltage of a wind generator became 36 [V] so it could be identified that the output voltage of a wind generator diminished and then it became 0 [V] after 5 [sec]. Besides, in case of applying the method suggested in this paper to a small wind power generation facility for street lights, it is expected to reduce its maintenance by preventing a frequent failure of a generator and to improve its utilization rate.

집단 성과급제도의 공정성이 신뢰에 미치는 영향 - 인사시스템 신뢰강도의 조절효과로 - (A Study on the Effect of Fairness Perception of Incentive System on Manager-Trust -The moderating effect on HRM strength-)

  • 김성건;김해룡
    • 디지털융복합연구
    • /
    • 제14권9호
    • /
    • pp.199-214
    • /
    • 2016
  • 기업에서 매년 성과급 지급과 관련하여 노사 간의 협상이 이루어지고 있다. 협상에 따라 노사 간의 갈등을 초래하기도 한다. 이러한 집단적 노사관계에 있어서 인사시스템에 대한 신뢰는 매우 중요하다. 성과급 이슈에서 시작된 본 연구는 성과급 공정성이 경영자 신뢰도에 미치는 영향관계를 분석하고 인사시스템 신뢰강도가 어떻게 조절효과를 나타내는가를 파악하여 인적자원관리 선택이 경영자신뢰에 미치는 과정을 살펴보았다. 그 결과, 성과급의 공정성과 경영자 신뢰도는 유의한 정(+)의 영향을 미친다고 나타났다. 그리고 성과급제도의 공정성과 경영자 신뢰의 영향관계에 있어서 인사시스템 신뢰강도의 조절작용 효과를 검정한 결과, 분배공정성과 경영자 신뢰도의 관계에서 명확성, 일관성, 합의성은 조절효과가 있는 것으로 나타났으나, 절차공정성과 경영자 신뢰도의 영향관계에서는 일관성, 합의성은 조절효과가 없었으나 명확성은 작용하는 것으로 나타났다. 이는 성과급 공정성의 인식정도가 높을수록 경영진의 신뢰가 증가하며, 인사시스템의 신뢰강도에 있어서 다른 항목보다도 명확성이 보다 유의미한 것으로 나타났다.

Dynamic Positioning 선박들의 사고사례 분석 (An Analysis on Incident Cases of Dynamic Positioning Vessels)

  • 채종주;정연철
    • 한국항해항만학회지
    • /
    • 제39권3호
    • /
    • pp.149-156
    • /
    • 2015
  • Dynamic Positioning System(DPS)은 동력, DP control 장치, DP 컴퓨터, 위치참조시스템(PRS), 센서, thruster 시스템 및 DP 운용자(DPO) 7가지로 구성되어 있다. DP 선박은 이들 구성요소들에 문제가 발생하면 그 기능을 상실할 수 있는데 이러한 DP 선박의 위치손실사고(Loss of Position, LOP)는 선주가 자발적으로 매년 IMCA에 보고하고 있다. 본 연구에서는 2001~2010년까지 10년 동안 IMCA 보고된 DP 선박 관련사고 612건에 대한 분석을 바탕으로 DPS의 7가지 구성요소와 관련된 사고 원인을 파악하고 이들 중 높은 비율을 차지하는 요인의 정성적, 정량적 분석을 통한 DP 선박의 안전운항 방안을 모색하고자 한다. 10년 평균 가장 높은 비율을 차지한 DPS 사고원인 요소는 PRS였다. 이를 전문가들의 브레인스토밍을 통해 작성된 flowchart를 바탕으로 베이지안 네트워크 분석을 시행한 결과 PRS 각 요소별 조건부 확률을 확인할 수 있었다. DP 선박의 drive off를 발생시키는데 주요한 영향을 미치는 것은 DGPS, microwave radar 및 HPR 이었고 DGPS에 주요한 영향을 미치는 에러 요인은 signal blocked, electric components failure, relative mode error 및 signal weak or fail이라는 것도 확인할 수 있었다.

25BAR급 바이오가스 고압 압축공급시스템 상세설계 (Detailed Design for 25bar-class Biogas Compression Supplying System)

  • 허광범;박정극;윤은영;이정빈
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2011년도 춘계학술대회 초록집
    • /
    • pp.173.1-173.1
    • /
    • 2011
  • The high fuel flexibility of gas turbine power system has boosted their use in a wide variety of applications. Recently, the demand for biogas generated from the digestion of organic wastes and sewage waste water as a fuel for gas turbines has increased. We investigated the performance of high pressure biogas compression system and operating conditions for supplying biogas. The total flow per minute of biogas from food waste water digestion tank is $54Nm^3$. The main type of biogas compression system is the reciprocating system and screw type system. The target of biogas mechanical data is the as belows; inlet pressure 0.045bar, supplying biogas temperature is $30{\sim}60^{\circ}C$, and final pressure is above the 25 bar. Also, inlet conditions of biogas consist of CH4 48.5%~83%, $H_2S$ Max. 500ppm, $NH_3$ Max. 1,500ppm and Siloxane 2.7~4.6ppm. The boosting Blower system raises a pressure from 0.045bar to 1bar before main compressor. The main system lay out of reciprocating consisits of compressor driver, filter, cooling system, blowdown vessel, control system and ESD(Emergency Shut Down) system. And an enclosure package needs to be installed for reducing noise up to 75dB. The system driver is the electronic motor of explosion proof type. Forthe compressor system reliable operation, the cleaning system something like particulate filter needs to be set up in the inlet of compressor and Coalescing Filter in the outlet of compressor. Particulate Filter has to be removed above $10{\mu}m$ size of the particles in biogas. The coalescing filter(Micofine Borosilicate Glass Fibers Filter treated phenol acid) also removes moisture and oil of above $0.3{\mu}m$ to be involved in high pressure biogas up to 90%~98%.

  • PDF

200MW MODULATOR의 출력안정화를 위한 DE-Q'ING SYSTEM에 관한 연구 (Study on the De-Q'ing System for the Output Voltage Stabilization of a 200MW Modulator)

  • 손윤규;오종석;조무현;남궁원
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1994년도 하계학술대회 논문집 C
    • /
    • pp.1612-1614
    • /
    • 1994
  • Modulators Installed in PLS(Pohang Light Source) Linac are composed of a DC high voltage section, a charging section and a discharging section. PFN is charged by a resonant charging mechanism, and discharged by a switching device through the primary of the pulse transformer connected to a load. Charged PFN voltage must be well regulated to obtain stable output pulse voltage at the load. For this purpose, DCHV is controlled by a SCR controller with feedback signal, and PFN voltage is regulated by a De-Q'ing circuit. The full power operation test shows the pulse voltage regulation within ${\pm}0.13%$ with SCR feedback control alone, and within ${\pm}0.08%$ together with De-Q'ing. This paper describes the design concept and operational characteristics of the De-Q'ing circuit.

  • PDF