• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.1727-1732
• /
• 2004

For the purpose of monitoring by ultrasonic test of the ball bearing conditions in rotating machinery, a system for their diagnosis was developed. ultrasonic technique is used to detect abnormal conditions in the bearing system. And various data such as frequency spectrum, energy and amplitude of ultrasonic signals, and ultrasonic parameters were acquired during experiments with the simulated ball bearing system. Based on the above results and practical application for power plant, algorithms and judgement criteria for diagnosis system was established.

• 정보통신설비학회논문지
• /
• 제2권4호
• /
• pp.42-51
• /
• 2003

본 논문에서는 무선 LAM 시스템에서 전력증폭기의 위상왜곡에 따른 출력 스펙트럼의 관계에 대해 분석하고자 하였으며, 이를 위해 전력증폭기의 ACPR. 특성과 OFDM방식의 고려사항을 고찰하였다. 또한, OFDM 변조방식과 전력증폭기의 비선형성과의 관계를 알기위해 최대. 54Mbps의 전송속도를 갖는 IEEE 802.11a 규격의 OFDM 변조부와 송신부를 시뮬레이션하였다. 전력증폭기의 비선형 특성은 AM-to-AM과 AM-to-PM으로 모델링 하였으며, 구성된 입력 신호원을 전력증폭기에 인가하여 위상왜곡에 따른 출력 스펙트럼 특성을 분석하였다. 출력 스펙트럼 분석결과 위상왜곡이 증가할수록 전력 증폭기의 AM-to-PM 특성이 $5^{\circ}$일 때 P1dB에서의 출력 스펙트럼은 요구 스펙트럼을 만족하였지만, $10^{\circ}$에서부터 $20^{\circ}$까지의 위상왜곡에서는 요구 스펙트럼을 만족하지 못함을 확인할 수 있었다. 또한, 전력증폭기의 비선형 특성으로 인해 생성되는 주파수 재성장으로 인한 전력증폭기의 출력 스펙트럼은 P1dB에서 만족하지 않는다. 따라서, AM-to-PM 왜곡 정도에 따라 back-off값이 요구되며, OFDM을 이용한 변조부의 경우 더 적은 back-off값이 요구됨을 알 수 있었다.

• 한국대기환경학회지
• /
• 제25권2호
• /
• pp.133-140
• /
• 2009

In order to examine the effects of micrometeorological and climatological influences on urban scale particulate air pollutants observed in Busan, power spectrum analysis was applied to the observed particulate matter with aerodynamic diameter ${\le}10{\mu}m$ ($PM_{10}$) for the period from 1991 to 2006. Power spectrum analysis has been employed to the daily mean $PM_{10}$ concentrations obtained at 13 sites to identify different scales of periodicities of $PM_{10}$ concentrations. The results show that, aside from the typical and well-known periodicities such as diurnal and annual variations caused by anthropogenic emission influences, another two significant peaks of power spectrum density were identified: 21 day and $3{\sim}4$ year of periodicities. Cospectrum analysis indicates that the intraseasonal 21 day periodicity are found to be negatively correlated with wind speed and surface pressure but shows consistently positive with relative humidity and temperature. This result implied that 21 day periodicity is presumably relevant to the secondary aerosol formation processes through the photochemical reaction that can be subsequently resulted from hygroscopic characteristics of aerosol formation. However, the interannual $3{\sim}4$ year of periodicity is found to have positive correlation with pressure, and negative with temperature and relative humidity, which is rather consistent with both characteristics of air mass during the Asian dust event and the occurrence frequency of Asian dust whose periodicities have been recorded inter-annually over the Korean peninsula.

• 한국기계가공학회지
• /
• 제5권3호
• /
• pp.36-42
• /
• 2006

The analytical realization of uncoupled system was introduced in this study using times series and its spectrum analysis. The ARMAX spectra of time series methods were compared with the conventional FFT spectrum. Also, the response of second order system uncoupled was solved using the Runge-Kutta Gill method. In this numerical analysis, the displacement, velocity and acceleration were calculated. The displacement response among them was used for the power spectrum analysis. The ARMAX algorithm in time series was proved to be appropriate for the mode estimation and spectrum analysis. Using the separate response of first and second mode, each modes were calculated separately and the response of mixed modes was also analyzed for the mode estimation using several time series methods.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2001년도 제34회 추계학술대회 개최
• /
• pp.13-18
• /
• 2001

In this paper, FFT(Fast Fourier Transform) analysis of friction was suggested as a method to interpret the contact conditions. Micro-grooves with various dimensions were fabricated on the silicon surface to investigate the frictional behavior with respect to the change in geometrical contact condition. Frictional forces between micro-grooved surfaces and spheres modeled as surface asperities were measured using a micro-tribotester which was built inside a SEM(Scanning Electron Microscope). The experimental results show that the relative dimensions and distributions of contact asperities between two surfaces can be predicted by the power spectrum and the main frequency in FFT-based analysis of friction coefficient. Also, it was shown that the friction coefficient for multi-asperities was the result of the superposition of that for each asperity.

• 한국지진공학회논문집
• /
• 제23권5호
• /
• pp.279-288
• /
• 2019

Safety-related cabinets and their electrical parts, such as relays and switches in nuclear power plants, should maintain continuous functioning, as well as structural safety according to the nuclear regulatory guidelines. Generally, an electrical part is qualified if its functioning is maintained without abnormality during excitement by motion compatible with the test response spectrum, which is larger than its in-cabinet response spectrum (ICRS). ICRS can be determined by shake-table test or dynamic analysis. Since existing cabinets in use can hardly be stopped and moved, dynamic analysis is preferred over shake-table test in determining ICRS. The simple method, suggested by the Electric Power Research Institute (EPRI) to determine ICRS, yields conservative or non-conservative results from time to time. In order to determine that the ICRS is better than EPRI method in a simple way, Ritz method considering global and local plate behaviors was suggested by Gupta et al. In this paper, the Ritz method is modified in order to consider the rocking and frame behaviors simultaneously, and it is applied to a simple numerical example for verification. ICRS is determined by Ritz method and compared with the results by finite element method (FEM). Based on this numerical example, recommendations for using Ritz method are suggested.

• IEIE Transactions on Smart Processing and Computing
• /
• 제3권5호
• /
• pp.285-297
• /
• 2014

This paper presents the results of an investigation into bi-directional communication in spectrum sharing-based cognitive radio (Bi-CR) systems. A Bi-CR system can increase the spectral efficiency significantly by sharing the spectrum and through the bi-directional use of spatial resources for two-way communication. On the other hand, the primary user experiences more interference from the secondary users in a Bi-CR system. Satisfying the interference constraint by simply reducing the transmission power results in performance degradation for secondary users. In addition, secondary users also experience self-interference from echo channels due to full duplexing. These imperfections may weaken the potential benefits of the Bi-CR system. Therefore, a new way to overcome these defects in the Bi-CR system is needed. To address this need, this paper proposes some novel power allocation schemes for the Bi-CR system. This contribution is based on two major analytic environments, i.e., noise-limited and interference-limited environments, for providing useful analysis. This paper first proposes an optimal power allocation (OPA) scheme in a noise-limited environment and then analyzes the achievable sum rates. This OPA scheme has an effect in the noise-limited environment. In addition, a power allocation scheme for the Bi-CR system in an interference-limited environment was also investigated. The numerical results showed that the proposed schemes can achieve the full duplexing gain available from the bi-directional use of spatial resources.

• 플랜트 저널
• /
• 제11권2호
• /
• pp.39-44
• /
• 2015

본 연구는 석탄화력 탈황설비인 흡수탑 교반기용 유도전동기의 베어링 결함진단을 토대로 전류 스펙트럼 해석이 예측정비 수단으로서 활용할 수 있는지를 논하고자 하였다. 베어링의 교체 전과 후의 전류스펙트럼 해석을 하고 베어링을 육안 점검하여 비교 분석함으로써 실제 발전 산업현장에서 부하운전중인 유도전동기의 베어링의 결함진단을 하였다. 분석 결과, 볼과 외륜의 베어링 결함에 해당하는 주파수성분이 예측한 값으로 검출되었고 전압기준의 진폭크기로 환산하여 베어링 교체하기 전과 후를 비교하면 결함이 진행될 경우 볼 결함에서는 약 2.9배 증가되고 외륜 결함에서는 약 2.24배 증가 되었음을 확인할 수 있었다. 이 같은 결론으로 인위적인 고장요소에 의한 베어링 결함진단 뿐만 아니라 산업현장에서 부하 운전되고 있는 유도전동기의 베어링 결함을 사전에 예측하는데 있어서도 매우 유용하였다.

• 한국전자파학회논문지
• /
• 제23권12호
• /
• pp.1406-1411
• /
• 2012

에너지 검파 기반 스펙트럼 감지 방식은 잡음 전력에 대한 불확실성에 취약한 것으로 알려져 있다. 이러한 문제점을 해결하기 방안 중의 하나로 협력 스펙트럼 감지 기술을 함께 사용하는 방안이 제안된 바 있다. 그러나 아직까지 페이딩 채널 환경에서 이 방식에 대한 성능 분석이 발표된 바가 없다. 본 논문에서는 에너지 검파 기반 스펙트럼 감지 방식에 대한 이전 연구 결과를 토대로 에너지 검파 기반 협력 스펙트럼 감지 방식에 대한 수학적 분석 결과를 제시하고자 한다. 분석 결과에 따르면 잡음 전력에 대한 불확실성이 존재할 때는 스펙트럼 감지 시간이 늘어나거나 OR 융합 방식의 협력 스펙트럼 감지에 참여하는 2차 사용자가 많아질수록 오경보 확률과 검파 확률이 높아진다는 것을 확인할 수 있었다.

• 대한기계학회논문집A
• /
• 제26권7호
• /
• pp.1376-1383
• /
• 2002

Seismic qualification of the Air Cleaning Units for nuclear power plant Ulchin 5&6 has been performed with the guideline of ASME Section III and IEEE 344 code. By using the structural and geometrical similarity analysis, the three models to be analyzed are condensed into a single model and, at the same time, the excitation forces and other operating loads for each model are encompassed with respect to different loading conditions. As the fundamental frequencies of the structure are found to be less than 33Hz, which is the upper frequency limit of the seismic load, response spectrum analysis using ANSYS is performed in order to combine the modal stresses within the frequency limit. In order to confirm the structural and electric stability of the major components, modal analysis theory is adopted to derive the required response spectrum at the component locations. As the all combined stresses obtained from the above procedures are less than allowable stresses and no mechanical or electrical failures are found from the seismic testing, the authors confirm the safety of the nuclear equipments Air Cleaning Units studied in this paper.