• Steel and Composite Structures
• /
• 제18권1호
• /
• pp.187-212
• /
• 2015

In this paper, various four variable refined plate theories are presented to analyze vibration of temperature-dependent functionally graded (FG) plates. By dividing the transverse displacement into bending and shear parts, the number of unknowns and governing equations for the present model is reduced, significantly facilitating engineering analysis. These theories account for parabolic, sinusoidal, hyperbolic, and exponential distributions of the transverse shear strains and satisfy the zero traction boundary conditions on the surfaces of the plate without using shear correction factors. Power law material properties and linear steady-state thermal loads are assumed to be graded along the thickness. Uniform, linear, nonlinear and sinusoidal thermal conditions are imposed at the upper and lower surface for simply supported FG plates. Equations of motion are derived from Hamilton's principle. Analytical solutions for the free vibration analysis are obtained based on Fourier series that satisfy the boundary conditions (Navier's method). Non-dimensional results are compared for temperature-dependent and temperature-independent FG plates and validated with known results in the literature. Numerical investigation is conducted to show the effect of material composition, plate geometry, and temperature fields on the vibration characteristics. It can be concluded that the present theories are not only accurate but also simple in predicting the free vibration responses of temperature-dependent FG plates.

• Smart Structures and Systems
• /
• 제19권2호
• /
• pp.163-179
• /
• 2017

The axisymmetric buckling delamination of the Piezoelectric/Metal/Piezoelectric (PZT/Metal/PZT) sandwich circular plate with interface penny-shaped cracks is investigated. The case is considered where open-circuit conditions with respect to the electrical displacement on the upper and lower surfaces, and short-circuit conditions with respect to the electrical potential on the lateral surface of the face layers are satisfied. It is assumed that the edge surfaces of the cracks have an infinitesimal rotationally symmetric initial imperfection and the development of this imperfection with rotationally symmetric compressive forces acting on the lateral surface of the plate is studied by employing the exact geometrically non-linear field equations and relations of electro-elasticity for piezoelectric materials. The sought values are presented in the power series form with respect to the small parameter which characterizes the degree of the initial imperfection. The zeroth and first approximations are used for investigation of stability loss and buckling delamination problems. It is established that the equations and relations related to the first approximation coincide with the corresponding ones of the three-dimensional linearized theory of stability of electro-elasticity for piezoelectric materials. The quantities related to the zeroth approximation are determined analytically, however the quantities related to the first approximation are determined numerically by employing Finite Element Method (FEM). Numerical results on the critical radial stresses acting in the layers of the plate are presented and discussed. In particular, it is established that the piezoelectricity of the face layer material causes an increase (a decrease) in the values of the critical compressive stress acting in the face (core) layer.

• 한국전자파학회논문지
• /
• 제29권8호
• /
• pp.594-598
• /
• 2018

메타표면에 가장 많이 이용되는 전기적으로 작은 크기를 갖는 정사각형 패치에 전위 연속성을 이용하여 접선방향 전기 분극률을 계산 방법을 제안하였다. 패치의 경우, 중심에 위치한 등가 전기 쌍극자에 의한 패치 표면에서의 전위가 균일하지 않기 때문에, 분극률이 한 개의 값으로 정의되지 않는 문제가 있었다. 이를 해결하기 위하여 패치 표면을 메쉬로 나누고, 각 점에서 얻어진 분극률을 평균함으로써 등가 분극률을 계산하였다. 제안된 방법, 기존의 멱급수 3차항 근사식, 실험식의 결과를 비교하여 잘 일치함을 보였다. 제안된 방법으로 구해진 분극률을 generalized sheet transition conditions(GSTCs)에 적용하여 계산된 메타표면의 반사계수의 크기와 위상이 ANSYS HFSS(high-frequency structure simulator) 모의실험 결과와 잘 일치함을 보였다.

• 정보처리학회논문지C
• /
• 제12C권4호
• /
• pp.535-542
• /
• 2005

본 논문은 새로운 대체경로 확보 방안을 통하여 라우팅 성능을 개선하는 요구형 애드학 라우팅 프로토콜인 Node Density Based Routing(NDBR)을 제안한다. 모바일 노드들의 이동이나 전력 고갈 등으로 인해 애드학 망의 연결은 장애를 일으킬 가능성이 매우 높기 때문에 발신지에서 목적지까지의 연결 설정 시 대체경로를 확보해 두는 것이 중요하다. NDBR은 목적지까지의 대체경로들을 확보하기 위해 상대적으로 더 많은 이웃 노드들을 갖는 중간 노드들로 구성되는 연결 설정을 목표로 하며 이를 위해 노드 밀집도라는 새로운 경로선택기준을 도입한다. NDBR은 경로 장애 발생 시 발신지에 의한 경로재탐색 절차 없이 목적지에 대한 도달성을 향상시킴으로써 경로장애의 영향을 국소화시키고, 제어 트래픽에 의한 오버헤드를 줄이며, 경로재설정 시간을 감소시킬 수 있다 본 논문에서는 노드 밀집도를 이용하여 대체경로를 포함하는 경로설정 절차와 경로 상의 중간 노드에서 대체경로 정보를 유지하여 활용하는 방법에 대해 기술하고 시뮬레이션을 통한 기존 프로토콜과의 비교를 통해 라우팅 성능이 개선됨을 보였다.

• 한국ITS학회 논문지
• /
• 제16권2호
• /
• pp.161-170
• /
• 2017

발리스는 열차의 안전한 운행을 위하여 철도의 레일 사이에 설치하여 운영하는 장치로, 텔레그램이라 칭하는 정보(거리 구배 속도 임시 속도제한 등의 가변정보)를 무선으로 통과하는 열차에 전송하는 기능을 갖는다. 본 연구는 이에 필요한 DBPL 인코더의 설계에 대한 것이다. 일반적으로 발리스를 위한 DBPL 인코더는 전용 ASIC이나 FPGA를 통하여 구현하고 있으나, 본 연구에서는 범용의 저전력 마이크로컨트롤러(STM32L4 Series)를 활용하여 설계하였다. 본 연구의 DBPL인코더는 펌웨어 방식의 논리적 1차 처리 수단과 마이크로컨트롤러 내장 SPI Bus 등을 이용한 물리적 출력수단으로 구분하여 설계하였다. 본 연구의 DBPL 인코더는 유로발리스 표준에서 요구하는 564.48Kbps의 속도로 동작 가능함을 확인하였다.

• 한국지반공학회지:지반
• /
• 제14권2호
• /
• pp.67-78
• /
• 1998

마이크로터널링은 비교적 연약한 사질토 지반을 통과하는 소규모의 터널을 시공할 때 적용하는 공법으로, 터널 시작 위치에서 일련의 짧은 원형 콘크리트 관을 유압으로 밀어서 전구간을 관통하는 공법이다. 미국 뉴욕의 JFK공항의 활주로에서는 활주로 하부를 통과하는 전력구의 설치를 위하여 이러한 마이l터널링 공법을 시도하였다. 마이크로터널링 공법에서는 콘크리트관을 전진시키기 위해 강력한 유압으로 벤토나이트를 분출하는데, 이로 인하여 활주로 하부의 지반이 교란될 가능성이 있었기에 본 연구에서는 터널시공으로 인한 교란의 정도를 평가하기 위하여 SASW 기법과 크로스흘 시험을 수행하였다. 구조물 비파괴 건전도 기법인 SASW 기법으로는 활주로 기층 부위의 지반강성 변화 정도를 평가하였고, 크로스흘 시험으로는 활주로 인접 지반의 깊이별 5파속도 변화를 조사하였다. 또한, JFK 공항 부지에서 결정한 5파 속도-N 치의 부지특유 관계식을 통하여 5파 속도를 N치로 변환함으로써 지반강성의 변화를 지반강도 변화의 측면으로도 지반교란의 정도를 파악하였다.

• Bulletin of the Korean Chemical Society
• /
• 제32권2호
• /
• pp.559-565
• /
• 2011

The following noble series of statistical copolymers, poly[(2-(3-thienyl)ethanol n-butoxycarbonylmethylurethane)-co-3-hexylthiophene] (PURET-co-P3HT), were synthesized by the chemical dehydrogenation method using anhydrous $FeCl_3$. The structure and electro-optical properties of these copolymers were characterized using $^1H$-NMR, UV-visible spectroscopy, elemental analysis, GPC, DSC, TGA, photoluminescence (PL), and cyclic voltammetry (CV). The statistical copolymers, PURET-co-P3HT (1:0, 2:1, 1:1, 1:2, 1:3), were soluble in common organic solvents and easily spin coated onto indium-tin oxide (ITO) coated glass substrates. Hybrid bulk heterojunction photovoltaic cells with an ITO/G-PEDOT/PURET-co-P3HT:PCBM:Ag nanowires/$TiO_x$/Al configuration were fabricated, and the photovoltaic cells using PURET-co-P3HT (1:2) showed the best photovoltaic performance compared with those using PURET-co-P3HT (1:0, 2:1, 1:1, 1:3). The optimal hybrid bulk heterojunction photovoltaic cell exhibits a power conversion efficiency (PCE) of 1.58% ($V_{oc}$ = 0.82 V, $J_{sc}$ = 5.58, FF = 0.35) with PURET-co-P3HT (1:2) measured by using an AM 1.5 G irradiation (100 mW/$cm^2$) on an Oriel Xenon solar simulator (Oriel 300 W).

• Structural Engineering and Mechanics
• /
• 제65권4호
• /
• pp.453-464
• /
• 2018

In this paper, an efficient higher-order shear deformation theory is presented to analyze thermomechanical bending of temperature-dependent functionally graded (FG) plates resting on an elastic foundation. Further simplifying supposition are made to the conventional HSDT so that the number of unknowns is reduced, significantly facilitating engineering analysis. These theory account for hyperbolic distributions of the transverse shear strains and satisfy the zero traction boundary conditions on the surfaces of the plate without using shear correction factors. Power law material properties and linear steady-state thermal loads are assumed to be graded along the thickness. Nonlinear thermal conditions are imposed at the upper and lower surface for simply supported FG plates. Equations of motion are derived from the principle of virtual displacements. Analytical solutions for the thermomechanical bending analysis are obtained based on Fourier series that satisfy the boundary conditions (Navier's method). Non-dimensional results are compared for temperature-dependent FG plates and validated with those of other shear deformation theories. Numerical investigation is conducted to show the effect of material composition, plate geometry, and temperature field on the thermomechanical bending characteristics. It can be concluded that the present theory is not only accurate but also simple in predicting the thermomechanical bending responses of temperature-dependent FG plates.

• 지역연구
• /
• 제12권2호
• /
• pp.99-116
• /
• 1996

This study investigates the nature and patterns of interrelation between the emerging information and communication technology(ICT) and the organization of corporate space, both theoretically and empirically. In this work, ICT is conceptualized not so much a space-adjusting technology as an organizational technology. ICT is considered as a governance technology which is related to coordination function within a firm. Therefore, it is supposed to have a great relevance to the spatial reorganization of functions within a firm. Both questionnaire and case study method are used to gather necessary data from Korean electronics manufactures. The results of this study can be summarized as follow. First, the spatial structure of a firm, which is operationalised as the number and type of spatially separated establishments, is turned out to have a great explanatory power to its adoption of computer networks. Computer networks in muli-locational companies are introduced to overcome the limits of its spatial structure, such as duplication of functions, such as duplication of functions, loss of time spent in proceeding a job between different functional units, and unresponsiveness to the change of market demand. Second, new spatial division of labor and function could be possible through a series of business process reengineering, not through the mere adoption of ICT. Case studies reveal that computer network could help a firm to realize new forms of spatial division of labor, especially in those functions which is mainly based on the flow of information. Such function as ICT management, sales logistics and after-sales service are major parts where a new operational unit has appeared with the help of ICT. From above results, it can be concluded that the interrelations between ICT and organizational space should be approached intimately integrated with the change of industrial structure and it's organizational implications.

• Corrosion Science and Technology
• /
• 제15권2호
• /
• pp.84-91
• /
• 2016

The transport and deposition of corrosion products in pressurized water nuclear reactor (PWR) steam generators have led to corrosion (SCC, denting etc.) problems. Lancing, mechanical cleaning and chemical cleaning have been used to reduce these problems. The methods of lancing and mechanical cleaning have limitations in removing corrosion products due to the structure of steam generator tubes. But high temperature chemical cleaning (HTCC) with EDTA is the most effective method to remove corrosion products regardless of the structure. However, EDTA in chemical cleaning aqueous solution and chemical cleaning environments affects the integrity of materials used in steam generators. The nuclear power plants have to perform the pre-test (also called as qualification test (QT)) that confirms the effect on the integrity of materials after HTCC. This is one of the series studies that assess the effect, and this study determines the effects of 20 % EDTA aqueous solution on defective tubes in high temperature chemical cleaning environments. The depth and magnitude of defects in steam generator (SG) tubes were measured by eddy current test (ECT) signals. Surface analysis and magnitude of defects were performed by using SEM/EDS. Corrosion rate was assessed by weight loss of specimens. The ECT signals (potential and depth %) of defective tubes increased marginally. But the lengths of defects, oxides on the surface and weights of specimens did not change. The average corrosion rate of standard corrosion specimens was negligible. But the surfaces on specimens showed traces of etching. The depth of etching showed a range on the nanometer. After comprehensive evaluation of all the results, it is concluded that 20 % EDTA aqueous solution in high temperature chemical cleaning environments does not have a negative effect on defective tubes.