• Clean Technology
• /
• v.24 no.4
• /
• pp.357-364
• /
• 2018

Studies on the production of biogas from third generation biomass, such as micro- and macroalgae, have been conducted through experiments of various scales. In this paper, we investigated the feasibility of commercialization of integrated combined heat and power (CHP) production using biogas derived from macroalgae, i.e., seaweed biomass. For this purpose, an integrated CHP plant of industrial scale, consisting of solid oxide fuel cells, gas turbine and organic Rankine cycle, was designed and simulated using a commercial process simulator. The cost of each equipment in the plant was estimated through the calculated heat and mass balances from simulation and then the techno-economic analysis was performed. The designed integrated CHP process produces 68.4 MW of power using $36ton\;h^{-1}$ of biogas from $62.5ton\;h^{-1}$ (dry basis) of brown algae. Based on these results, various scenarios were evaluated economically and the levelized electricity cost (LEC) was calculated. When the lifetime of SOFC is 5 years and its stack price is $$225kW^{-1}$, the LEC was 12.26 ¢ $kWh^{-1}$, which is comparable to the conventional fixed power generation.

• Environmental and Resource Economics Review
• /
• v.29 no.4
• /
• pp.443-468
• /
• 2020

Broad effects of fuel-transition in all type of ground transportation have occurred with the help of the advances in electric vehicle (EV) technologies and the increases in EV supply. This research estimates the economic benefit of air environmental improvements, which results from the fuel-transition of high-mileage business cars(taxies) in metropolis. If we consider power production sector for EV operation, some air pollutants will be produced. In this respect, this research takes both the mixture of power sources in power production level and the driving pattern of business cars into account when investigating the economic benefit in air environment resulted from the fuel-transition of business cars(taxies). According to our results, the business cars' fuel transition from LPG to electricity brings about 21.5￦/km (8.6million won/year) of economic benefit in air environment. These results emphasize the necessity and appropriateness of public polices for expanding power production with renewable energies and facilitating EV distribution.

• Journal of Hydrogen and New Energy
• /
• v.33 no.6
• /
• pp.643-659
• /
• 2022

For the economic analysis of fuel cells, levelized cost of electricity was calculated according to the type, capacity, and annual production of the fuel cells. The cost of every component was calculated through the system component breakdown. The direct cost of the system included stack cost, component cost, assembly, test, and conditioning cost, and profit markup cost were added. The effect of capacity and annual production was analyzed by fuel cell type. Sensitivity analysis was performed according to stack life, capital cost, project period, and fuel cost. As a result, it was derived how much the economic efficiency of the fuel cell improves as the capacity increases and the annual production increases.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.448-451
• /
• 2005

This paper presents the methodology to analyze flow duration characteristics and performance prediction for small hydro power(SHP) plants and its application. The flow duration curvecan be decided by using monthly rainfall data at the most of the SHP sites with no useful hydrological data. It was proved that the monthly rainfall data can be characterized by using the cumulative density function of Weibull distribution and Thiessen method were adopted to decide flow duration curve at SHP plants. And, the performance prediction has been studied and development. One SHP plant was selected and performance characteristics was analyzed by using the developed technique. Primary design specfications such as design flowrate, plant capacity, operational rate and annual electricity production for the SHP plant were estimated. It was found that the methodology developed in this study can be a useful tool to predict the performance of SHP plants and candidate sites in Korea.

• 한국연소학회:학술대회논문집
• /
• 2005.10a
• /
• pp.64-68
• /
• 2005

Methane reforming processes to obtain hydrogen were investigated experimentally by using atmospheric plasma source. Among possible reforming processes, such as a $CO_2$ reforming(dry reforming), a partial oxidation (POx), a steam reforming(SR), and a steam reforming with oxygen(SRO or auto-thermal reforming), partial oxidation and the steam reforming with oxygen were considered. We choose a rotating arc plasma as an atmospheric plasma source, since it shows the best performances in our preliminary tests in terms of a methane conversion, a hydrogen production, and a power consumption. Then, the effects of a feeding flow-rate, an electrical power input to a plasma reaction, an $O_2/C$ ratio and a steam to carbon ratio in the case of SRO on the reforming characteristics were observed systematically. As results, at a certain condition almost 100% of methane conversion was obtained and we could achieve the same hydrogen production rate by consuming a half of electrical power which was used by the best results for other researchers.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.2
• /
• pp.162-168
• /
• 2014

Recently, researches on all-electric subsea system have been in progress. This paper describes a subsea tree using a lot of electrical signal and subsea control system. The way of subsea control is classified as all-electric systems or electro hydraulic systems. One of that has more merits in terms of cost, weight, power consumption, etc. because it uses electric signal instead of hydraulic signal. This paper describes the difference of each system's power consumption and simulation. As the result, if each system applies the same number of sensors, actuators, etc. The power consumption of all-electric system's load is less than at least 400kWh/day compared to the electro hydraulic system load.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.8 no.5
• /
• pp.397-406
• /
• 2003

Resistance spot welding is widely employed in a manufacturing process. In recent years, the requirement for more sophisticated quality control procedures has been in mass production industries. The requirements for high productivity and better weld qualities have lead to the development of more widely available microcomputer-based control. In this study, the inverter type power source and welding servo gun are developed. As the results, we have some advantages over the previous methods such as pneumatic gun. One of them is that the precise pressure control can be attained during the welding process. In addition, production time and cost can be decreased.

• New & Renewable Energy
• /
• v.10 no.1
• /
• pp.41-49
• /
• 2014

For a proper valuation of wind power project, it is necessary to consider volatilities of key parameters such as annual energy production, electricity sales price, and long term interest rate. Real option methodology allows to calculate option values of these parameters. Volatilities to be considered in wind project valuation are 1) annual energy production (AEP) estimation due to meteorological variation and estimation errors in wind speed distribution, 2) changes in system marginal price (SMP), and 3) interest rate fluctuation of project financing which provides refinancing option to be exercised during a loan tenor for commercial scale projects. Real option valuation turns out to be more than half of the sales value based on a case study for a FIT scheme wind project that was sold to a financial investor.

• Journal of Families and Better Life
• /
• v.20 no.1
• /
• pp.75-86
• /
• 2002

The purpose of this study is to analyse the change of agricultural labor participation and decision-making involvement of rural women in Korea from 1960s to 1990s. For analysis of these changes, I used the data surveyed and collected by different researchers during those times. During last 40 years, rural society and the mode of agricultural production rapidly changed according to the development of Korean industry. Agricultural labor participation of rural women increased since the mid 1970s. Their agricultural labor expanded into full ranges of farming. Their decision-making involvement also expanded into all divisions of farming. However, they did not have decision making power as much as they contributed to farm labor The expansion of rural women's labor within the sphere of farm production has not substantially altered the decision-making power structure within the farm household.

• Current Photovoltaic Research
• /
• v.12 no.3
• /
• pp.74-79
• /
• 2024

Photovoltaics (PV) is gaining attention as an alternative energy source to fossil fuels. Although the demand for PV is increasing, it requires more than three times the space compared to conventional power generation, leading to limtation of available land for PV installations. Agrivoltaics is combined with agriculture and solar power generation at the same space, making it highly efficient in terms of land use. This review explores various forms of agrivoltaics systems currently being researched and examines the relationship between energy production and agricultural productivity in these systems. With agrivoltaics, about 70-80% of the energy production of conventional solar power can be achieved, while agricultural yields can reach up to 90% of those produced through conventional farming methods.