• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.5
• /
• pp.683-689
• /
• 2012

Photovoltaic(PV) system is one of power generation systems. Solar light in PV system is like the fuel of the car. The quantity of electricity generation, therefore, is fully dependent on the available quantity of solar light on the system of each site. If a utility can predict the solar power generation on a planned site, it may be possible to set up an appropriate PV system there. It may be also possible to objectively evaluate the performances of existing solar systems. Based on the theories of astronomy and meteorology, in this paper, Perez model is simulated to estimate the available quantity of solar lights on the prevailed photovoltaic systems. Consequently the conditions for optimal power generation of each PV system can be analyzed. And the maximum quantity of power generation of each system can be also estimated by applying assumed efficiency of PV system. Perez model is simulated in this paper, and the result is compared with the data of the same model of Meteonorm. Simulated site is Daejeon, Korea with typical meteorological year(TMY) data of 1991~2010.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.8
• /
• pp.923-929
• /
• 2019

The stability of the propulsion system is crucial for the autonomous vessel. Multiple power generation and propulsion systems should be provided for the stability of the propulsion system. High power generation capacity is calculated for stability, resulting in economical decline due to low load operation. To solve this problem, we need to optimize the power system. In this paper, an OPMS for electric propulsion ship is constructed. The OPMS consists of a hybrid power generation system, an energy storage system, and a control load system. The power generation system consists of a dual fuel engine, the energy storage system is a battery, and the control load system consists of the propulsion load, continuous load, intermittent load, cargo part load and deck machine load. The power system was constructed by modeling the characteristics of each system. For the experiment, a scenario based on ship operation was prepared and the stability and economical efficiency were compared with existing electric propulsion ships.

• 한국신재생에너지학회:학술대회논문집
• /
• 2008.10a
• /
• pp.91-93
• /
• 2008

A Buoyant Hybrid Power Generation System (BHPGS) described in this paper, is a conceptual approach to a hybrid solar-wind power generation in the near sea. The primary purpose of the BHPGS is given to improve utilization of solar cell modules. Main components of the BHPGS include a solar cell module, buoyant object, power generator, and support assembly including weight. Components such a generator controller, DC/AC converter, etc., are not configured in the current BHPGS because they can easily be purchased as a commercial-off-the-shelf product. In addition, some of the BHPGS applications are discussed.

• Proceedings of the KIPE Conference
• /
• 2001.07a
• /
• pp.124-127
• /
• 2001

가상현실 기술을 이용한 컴퓨터 지원 교육훈련 시스템 (VR-CATS: Virtual Reality based Computer Assisted Training System) 개발에 대한 연구를 전력연구원에서는 계속 수행해 왔다. 본 논문에서는 New VR-CATS (울진 3호기 참조)중 가상현실에서의 공동 협동 훈련 시스템(Virtual Reality Collaboration Training System)의 설계에 관하여 서술한다. 공동작업은 발전소 MCR(Main Control Room)을 3D 데이터 모델링 후 가상현실화하고 MCR 내부를 Navigation 할 수 있도록 가상패널(Virtual Panel)을 개발 및 에에 대한 엔지니어링 데이터베이스환경을 작성하여 추후 정확하고 신속한 계기 정보를 얻을 수 있도록 하며 훈련생들이 시뮬레이터실로 가지 않고 MCR에서 발전소를 운전하는 것과 같은 효과를 강의실에서 얻을 수 있다. 또한 설계기준사고 중의 하나인 LOCA 사고 복구 훈련 시나리오를 통하여 실제와 동일한 복구 훈련을 하므로서 효율적이며 현장감있는 교육훈련 수행을 가능케 한다.

• Journal of Power Electronics
• /
• v.13 no.5
• /
• pp.798-805
• /
• 2013

This paper presents the control and implementation of the dual-stator-winding induction generator for variable frequency AC (VFAC) generating system. This generator has two sets of stator windings embedded into the stator slots. The power winding produces the VFAC power to feed the loads, and the control winding is connected to the static excitation controller to control the generator for output voltage regulation with speed and load variations. On the basis of the idea of power balance, an instantaneous slip frequency control (ISFC) strategy using the information of both the output voltage and the output power is used in this system. A series of experiments is carried out on a 15 kW prototype for verification. Results show that the system has good static and dynamic performance in a wide speed range, which demonstrates that the ISFC strategy is suitable for this system.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.5
• /
• pp.1983-1988
• /
• 2015

This paper proposes the enhanced application of superconducting magnetic energy storage (SMES) for the effective compensation of power fluctuations based on the interleaving technique. With increases in demand for renewable energy based photovoltaic (PV) generation system, the output power fluctuations from PV generation system due to sudden changes in environmental conditions can cause serious problems such as grid voltage and frequency variations. To solve this problem, the SMES system is applied with its superior characteristics with respect to high power density, fast response for charge and discharge operations, system efficiency, etc. In particular, the compensation capability is effectively improved by the proposed interleaving technique based on its parallel structure. The dynamic performance of the system designed using the proposed method is evaluated with several case studies through time-domain simulations.

• 유체기계공업학회:학술대회논문집
• /
• 2001.11a
• /
• pp.354-360
• /
• 2001

Hybrid energy system of fuel cell and gas turbine is discussed as the system to be used in the distributed power generation. Discussion is first directed to the distributed power generation system which is expected to be more popularly introduced both in urban and isolated areas. In the next some characteristic features of fuel cell and micro gas turbine are shortly described. In the last discussion is turn to the fuel cell and micro gas turbine hybrid system. In particular, performance characteristics of a representative SOFC/MGT hybrid system are investigated through the concept design at various power capacity levels.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.3
• /
• pp.478-485
• /
• 2009

This paper describes retail cost through scenario in the ratio of CG(Centralized Generation) and DG(Decentralized Generation) that constructs new generation capacity in the future. it is not calculated for the supply, but for demand considering an advantage of DG. In the Korea Power System, retail cost that composed of construction, T&D, fuel, maintenance and environment shows macro-trend that power system planning through penetration for DG will be more significant.

• Journal of the Korea Computer Industry Society
• /
• v.4 no.4
• /
• pp.433-442
• /
• 2003

The performance of communication systems should be tested against a set of requirements. To this end, noise generation systems are used to generate noise signals with specified characteristics. In recent study, noise generation system using DCT outperforms the conventional noise generation system when a noise model requires complicated PSD(Power Spectral Density) specifications. In this paper low area/power structures of non-DCT block in DCT-based noise generation system are proposed. Simulation results show that the low area structure results in area reduction by 61-64% and the low power structure achieves power reduction by 88-89% except DCT blocks.

• Solar Energy
• /
• v.8 no.2
• /
• pp.26-38
• /
• 1988

If proper design and selection of the working fluid are made the power generation system of temperature difference could achieve more efficient results than others. This paper is to analysis the production of its power generation due to several parameters. Making the power generation system, the characteristics of power output are investigated to obtain its basic data for design. This results of this experiment are as follows. 1. The most proper working fluid in the system is Freon-22 having high stability and difference between the outlet pressure, $P_E$ of evaporator and outlet pressure, $P_c$ of Condenser. 2. With the increase of temperature difference between evaporator and condenser, the output in the system increases linearly. 3. The generation efficiency is largely dependent on the type or form of propeller, nozzle and optimum design of heat exchanger.