• The Journal of the Korea Contents Association
• /
• v.13 no.10
• /
• pp.54-61
• /
• 2013

This paper presents a simplified hardware based edge detection circuit which is based on an analog correlator combining with the neighbor pixels in CMOS image sensor. A pixel element of the edge detector consists of an active pixel sensor and an analog correlator circuit which connects two neighbor pixels. The edge detector shares a comparator on each column that the comparator decides an edge of the target pixel with an adjustable reference voltage. The circuit detects image edge from CIS directly that reduces area and power consumption 4 times and 20%, respectively, compared with the previous works. And also it has advantage to regulate sensitivity of the edge detection because the threshold value is able to control externally. The fabricated chip has 34% of fill factor and 0.9 ${\mu}W$ of power per a pixel under 0.18 ${\mu}m$ CMOS technology.

• Journal of the Microelectronics and Packaging Society
• /
• v.19 no.1
• /
• pp.33-38
• /
• 2012

An in-plane thermoelectric sensor was processed on a glass substrate by evaporation of the n-type Bi-Te and p-type Sb-Te thin films, and its sensing characteristics were evaluated. The n-type Bi-Te thins film used to fabricate the inplane sensor exhibited a Seebeck coefficient of -165 ${\mu}V$/K and a power factor of $80{\times}10^{-4}W/K^2-m$. The p-type Sb-Te thin film used to fabricate the in-plane sensor exhibited a Seebeck coefficient of 142 ${\mu}V$/K and a power factor of $51.7{\times}10^{-4}W/K^2-m$. The in-plane thermoelectric sensor consisting of 15 pairs of the n-type Bi-Te and the p-type Sb-Te evaporated thin films exhibited a sensitivity of 2.8 mV/K.

• Nuclear Engineering and Technology
• /
• v.8 no.2
• /
• pp.101-116
• /
• 1976

An attempt is made to analyze the unit nuclear power cost of the Go-ri units 1 and 2 in terms of a set of model data. For the calculational purpose, the power cost is first decomposed into the cost components related to the plant capital, operation and maintenance, working capital requirements, and fuel cycle operation. Then, POWERCO-50 computer code is applied to enumerate the first three components and MITCOST-II is used to evaluate the fuel cycle cost component. The specific numerical results are the fuel cycle cost of Go-ri unit 2 for three alternative fuel cycles presumed, levelized unit power cost of units 1 and 2, and the sensitivity of the power cost to the fluctuation of the model data. Upon comparision of the results with the power cost of the fossil power plants in Korea, it is found that the nuclear power is economically preferred to the fossil power. Nevertheless, the turnkey contract value of Go-ri unit 2 appears to be rather expensive compared with the available data on the construction cost of the PWR plants. Therefore, it is suggested that, in order to make the nuclear power plants more attractive in Korea, the unfavorable contract of such kind must be avoided in the future introduction of the nuclear power plant. Capacity factor is of prime importance to achieving the economic generation of the nuclear electricity from the Go-ri plant. Therefore, it is concluded that more efforts should be directed to make the maximum use of the Go-ri plant.

• Nuclear Engineering and Technology
• /
• v.51 no.1
• /
• pp.238-248
• /
• 2019

In the high-temperature and high-pressure irradiation environments, the multi-field coupling processes of hydrogen diffusion, hydride precipitation and mechanical deformation in Zircaloy cladding tubes occur. To simulate this hydrogen-induced complex behavior, a multi-field coupling method is developed, with the irradiation hardening effects and hydride-precipitation-induced expansion and hardening effects involved in the mechanical constitutive relation. The out-pile tests for a cracked cladding tube after irradiation are simulated, and the numerical results of the multi-fields at different temperatures are obtained and analyzed. The results indicate that: (1) the hydrostatic stress gradient is the fundamental factor to activate the hydrogen-induced multi-field coupling behavior excluding the temperature gradient; (2) in the local crack-tip region, hydrides will precipitate faster at the considered higher temperatures, which can be fundamentally attributed to the sensitivity of TSSP and hydrogen diffusion coefficient to temperature. The mechanism is partly explained for the enlarged velocity values of delayed hydride cracking (DHC) at high temperatures before crack arrest. This work lays a foundation for the future research on DHC.

• Journal of the Korean Institute of Gas
• /
• v.2 no.1
• /
• pp.1-6
• /
• 1998

A low power (below than 300 mW) catalytic bead combusible gas sensor is developed and utilized with a computer controlled sampling system for measuring heat content of natural gas. The heat content of gas is proportional to the change in the energy required to exposure to the sample of combustible gas. The heat content of natural gas samples ranging 36.30 - 39.88 $MJ/m^3$ is measured in the range of approximately $1\%$ error, which is comparable to its nominal heat content. Each gas represents a slightly different curve of sensitivity to sensor temperature. Thus all of the sensitivities are not equal to every temperature. In calibration process the choice of a optimum operating temperature is an important factor that influences the overall performance of the measurement system.

• Nuclear Engineering and Technology
• /
• v.41 no.5
• /
• pp.677-690
• /
• 2009

A previous study demonstrated that the two-row fuel assembly has much more favorable neutron-physical and thermal-hydraulic behavior than the conventional one-row fuel assemblies. Based on the newly developed two-row fuel assembly, an SCWR core is proposed and analyzed. The performance of the proposed core is investigated with 3-D coupled neutron-physical and thermal-hydraulic calculations. During the coupling procedure, the thermal-hydraulic behavior is analyzed using a sub-channel analysis code and the neutron-physical performance is computed with a 3-D diffusion code. This paper presents the main results achieved thus far related to the distribution of some neutronic and thermal-hydraulic parameters. It shows that with adjustment of the coolant and moderator mass flow in different assemblies, promising neutron-physical and thermal-hydraulic behavior of the SCWR core is achieved. A sensitivity study of the heat transfer correlation is also performed. Since the pin power in fuel assemblies can be non-uniform, a sub-channel analysis is necessary in order to investigate the detailed distribution of thermal-hydraulic parameters in the hottest fuel assembly. The sub-channel analysis is performed based on the bundle averaged parameters obtained with the core analysis. With the sub-channel analysis approach, more precise evaluation of the hot channel factor and maximum cladding surface temperature can be achieved. The difference in the results obtained with both the sub-channel analysis and the fuel assembly homogenized method confirms the importance of the sub-channel analysis.

• Korean Journal of Optics and Photonics
• /
• v.10 no.1
• /
• pp.64-67
• /
• 1999

We have been implemented 10 Gb/s-320 km of dispersion-shifted fiber (DSF) transmission. The optical link consists of a 10 Gb/s optical transceiver, an optical booster amplifier, 3 sets of optical in-line amplifiers, an optical preamplifier and transmission fibers. Firstly, we investigated the Q-factor characteristics in terms of optical signal to noise ratio (OSNR) of 320 km of DSF, measured receiver sensitivity is -27 dBm and power penalty is 2 dB, respectively. We concluded that optical SNR degradation and path penalty gives rise to 1 dB penalty, respectively.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.6 no.2
• /
• pp.125-132
• /
• 2003

Uzi fly (Exorista bombycis Louis) is one of the major larval endo-parasitoid of silkworm (Bombyx mori). It causes extensive damage to sericulture industry. The application of synthetic organic pesticides has tremendous impact on minimizing pest population but their overuse and frequent misuse and high sensitivity towards the silkworms, has forced the entomologists to search for alternatives to chemical control, which is safe to silkworm, environment and farm workers. Biological control continues to offer exciting possibilities for the control of fly pest population. It is environmentally safe alternative to chemical control and offering a long-term protection. Several potential hymenopteran parasitoids have been screened. Among successful natural enemies, Nesolynx thymus, Trichomalopsis apanteloctena, Trichopria sp., Brachymeria lasus, Pediobius sp., Spalangia sp., Spilomicrus karnatakensis and Dhirhinus sp. are important. It is essential to predict accurately the efficacy of these natural enemies in a new habitat prior to its introduction. The important desirable attributes of these potential parasitoids viz., host searching capacity, specificity, power of increase and fitness and adaptability of the parasitoid in new environment has been recorded. Results of the host parasitoid interaction indicate that the aging of the host function as a factor that influence the host finding efficiency of the parasitoid. It is highly scored with 15-20 hrs old pupa of the host. However, aging of the parasitoid does not significantly affect it. The sex ratio is female biased which is advantageous from biological control point of view, Biological suppression methods involving conservation and utilization of natural enemies have been discussed in detail.

• Fashion & Textile Research Journal
• /
• v.5 no.4
• /
• pp.337-350
• /
• 2003

Fiber industry is export leading industry that guide national economy development after the 1960s in Korea. But lately, including China and Southeast Asia pursuit, domestic fiber industry is taking serious situation. Various kind methods can be proposed for high value added in fiber industry, the research about color is essential. The importance of color is increasing in modern textile and fashion industry. Color is important factor of textile and fashion industry because color affects strong influence in human's sensitivity. Color expresses by hue, value and chroma but fashion industry is using mainly hue and tone color system. Daegu Gyeongbuk area is domestic maximum syntheic fiber producing district. This study planned the polyester standard color collections for general color management of the polyester industry in Daegu Gyeongbuk. As basic research for this I investigated the color appearance distribution of polyester fabrics in Daegu Gyeongbuk that were produced for the recently 10 years and Japanese polyester color collections "SCOTDIC 2450". Reflect these study finding, in this research planned the usable standard color collections "Hue and Tone Polyester Standard Color 288". This research constructs insufficient domestic color infrastructure and expect that basic role to develop the competitive power for Korean fiber industry.

• Journal of the Ergonomics Society of Korea
• /
• v.19 no.3
• /
• pp.13-21
• /
• 2000

Men perceive and react around him through the five senses. Also men give rise to the human sensibility and maintain his emotion. This study doesn't limit working environment to VDT environment, but considers the universal working environment acquiring information by eyesight stimulation. In case of forming an abnormal veiling reflection we consider the form ; a vertical(25%, 50%, 75%)and a horizontal(25%, 50%, 75%). The results from the subjective evaluation are analyzed by SD(Semantic Differentical methodology)of 5 point scale for visibility and nuisance when an abnormal veiling reflection forms on target. In addition, the results of the objective evaluation are suggested by measuring and analyzing EEG of bio-signal for visual sensitivity. The results of this study can apply to basic data which create a guideline of a visual operation. In particular, it can be designed as an illumination environment concerning an ergonomic factor on visual operations, mental stress such as a visual inspection operation, visual information search operation, etc. As a result, we can expect to reduce the visual nuisance and contribute to the improvement of the performance and the uplift of the competitive power.