• Journal of Power Electronics
• /
• v.17 no.1
• /
• pp.172-180
• /
• 2017

The repetitive control (RC) strategy is widely used in AC power systems because of its high performance in tracking period signal and suppressing steady-state error. However, the dynamic response of RC is determined by the fundamental period delay $T_0$ existing in the internal model. In the current study, a ($nk{\pm}i$)-order harmonic RC structure is proposed to improve dynamic performance. The proposed structure has less data memory and can improve the tracking speed by n/2 times. $T_0$ proves the effectiveness of the ($nk{\pm}i$)-order RC strategy. The simulation and experiments of ($6k{\pm}1$)-order and ($4k{\pm}1$)-order RC strategy used in the voltage source inverter is conducted in this study to control the harmonic current source, which shows the validity and advantages of the proposed structure.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.8
• /
• pp.1004-1013
• /
• 1999

This paper considers the transient stability problem of power system. The power system model is given as interconnected system consisting of many machines which are described by swing equations. We design a transient stability controller using passivity and neural network. The structure of the neural network controller is derived using a filtered error/passivity approach. In general, a neural network cannot be guaranteed to be passive, but the weight tuning algorithm given here do guarantee desirable passivity properties of the neural network and hence of the closed-loop error system. Moreover proposed controller shows good robustness by simulation for uncertainties in parameters, which can not be shown in the speed gradient method proposed by Fradkov[3,7].

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.1
• /
• pp.1-11
• /
• 1997

We examine the DS/SSMA system which is employing coherent BPSK with RAKE receiver. We adop Nakagami m-distribution as a multipath fading model. First, we analyze the performances of the system in the single cell environment and obtain the other-cell interference according to power control error. And considering the other-cell interference into the analysis of single cell system, we examine the cellular CDMA network. The average BER and outage probability are the figures of merit that characterize the system performance. The required BER, 1E-3, and required outage probability are the figures of merit that characterize the system performance. The requeired BER, 1E-3, and required outage probability, 1% for the voice transmission is considered to acquire the capacity of system.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2018.07a
• /
• pp.127-128
• /
• 2018

본 논문에서는 채널추정에러가 존재하는 셀룰라시스템 환경에서 D2D 통신을 위한 전력제어 알고리즘 운용방안을 제안한다. 전력제어의 목적은 요구하는 SIR 값을 유지하는 것이다. 하지만, 채널 추정에러 환경에서의 SIR 성능은 확률적 분포를 가지게 된다. 이러한 확률적 SIR 성능 분포를 고려하여, 채널추정에러를 보상하는 가변적인 SIR 적용과 재전송 기법을 복합하여 D2D 통신을 위한 전력제어 기법을 제안하도록 한다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2018.07a
• /
• pp.129-130
• /
• 2018

본 논문에서는 셀룰라시스템 환경에서 특히, 채널추정에러가 존재하는 환경에서 D2D 통신을 위한 전력제어 알고리즘 성능을 분석한다. 채널추정에러의 성능분석을 위해 가우시안 채널 추정에러를 모델링하였으며, 이는 SIR 성능이 확률적 분포를 가지도록 한다. 실제 전송환경에서는 송신단과 수신단 사이의 채널환경 변화로 인해 채널 추정 에러는 불가피하다. 이러한 채널추정 에러가 D2D 단말 전력제어 알고리즘에 어떻게 영향을 주는지 실험을 통하여 분석하도록 한다.

• Journal of Wind Energy
• /
• v.4 no.1
• /
• pp.46-52
• /
• 2013

The wind generally includes turbulence characteristics in nature. So the yaw errors between wind turbine direction and wind direction occur due to turbulence fluctuation. The yaw errors affect the fatigue load of wind turbine system and power reduction. The components of turbulence intensity are different from those of each site where the wind turbines are installed. We studied that the fatigue load and power efficiency are improved by controlling yaw motions. In this study, we controlled the averaged yaw error time according to site conditions by turbulence intensity.

• Journal of Information Processing Systems
• /
• v.16 no.5
• /
• pp.1158-1168
• /
• 2020

The distance vector-hop wireless sensor node location method is one of typical range-free location methods. In distance vector-hop location method, if a wireless node A can directly communicate with wireless sensor network nodes B and C at its communication range, the hop count from wireless sensor nodes A to B is considered to be the same as that form wireless sensor nodes A to C. However, the real distance between wireless sensor nodes A and B may be dissimilar to that between wireless sensor nodes A and C. Therefore, there may be a discrepancy between the real distance and the estimated hop count distance, and this will affect wireless sensor node location error of distance vector-hop method. To overcome this problem, it proposes a wireless sensor network node location method by modifying the method of distance estimation in the distance vector-hop method. Firstly, we set three different communication powers for each node. Different hop counts correspond to different communication powers; and so this makes the corresponding relationship between the real distance and hop count more accurate, and also reduces the distance error between the real and estimated distance in wireless sensor network. Secondly, distance difference between the estimated distance between wireless sensor network anchor nodes and their corresponding real distance is computed. The average value of distance errors that is computed in the second step is used to modify the estimated distance from the wireless sensor network anchor node to the unknown sensor node. The improved node location method has smaller node location error than the distance vector-hop algorithm and other improved location methods, which is proved by simulations.

• Proceedings of the KIPE Conference
• /
• 1997.07a
• /
• pp.70-78
• /
• 1997

A DSP-based nonlinear speed control of a permanent magnet synchronous motor(PMSM) which is robust to unknown parameter variations and speed measurement error is presented. The model reference adaptive system(MRAS) based adaptation mechanisms for the estimation of slowly varying parameters are derived using the Lyapunov stability theory. For the disturbances or quickly varying parameters, a quasi-linearized and decoupled model including the influence of parameter variations and speed measurement error on the nonlinear speed control of the PMSM is derived. Based on this model, a boundary layer integral sliding mode controller to improve the robustness and performance of a PMSM drive is designed and compared with the conventional controller. To show the validity of the proposed control scheme, simulations and experimental works are carried out and compared with the conventional control scheme.

• Proceedings of the KIPE Conference
• /
• 1998.07a
• /
• pp.352-356
• /
• 1998

This paper is a study about Ac servo motor position and speed control characteristics which depend on feedforward control, the acceleration / deceleration time constant after the interpolation, and PI control, automatic deceleration at corner in order to shape cutting control of feed drive system of the machine tool. The shape error caused by delay of the servo system in the direction of radius at the time of circular cutting is reduced by feedforward control. The shape error generated by the position command delay is minimized by using the acceleration / deceleration time constant after the interpolation. The results were verified to optical machining center experimentation of the machine tool.

• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.684-687
• /
• 1999

In this paper, a method for controlling a single phase PWM AC/DC converter without any voltage sensors is proposed. In this method, the source voltage is estimated by sliding mode observer and input current is synchronized with the estimated source voltage. The source voltage is estimated by current error between the actul and the estimated current. The experimental results confirm the validity of the proposed control method.