• Journal of Satellite, Information and Communications
• /
• v.6 no.2
• /
• pp.84-90
• /
• 2011

Handling paging mechanism at the IP layer (i.e., IP paging) makes it possible to support heterogeneous wireless access technologies, providing energy-saving and reduced location registration signaling overhead over IP-based mobile networks. However, IP paging may rather cause adverse effects under active communication environments because of significant paging signaling overhead and frequent paging delay. Therefore, in order to solve these problems, a cost-effective IP paging scheme is proposed in this paper, which enables a mobile node to perform selective registration and paging based on its profile information. Numerical results indicate that the proposed scheme has apparent potential to mitigate considerable paging signaling overhead and frequent paging delay in IP-based hierarchical mobile networks.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.6
• /
• pp.762-770
• /
• 2013

Korean military is currently using and operating a precision approach and landing system, called RAPCON (ASR/PAR), which is imported from overseas. However, drawbacks of this system are operational and cost problems that come along, e.g. straightness of the radio waves, limited ability of narrow searching, lack of interoperability, and high cost of installation and maintenance. Moreover, as the civilian air traffic control uses a similar system compared to the military, the so called DME/VOR/ILS, disturbance between these two systems triggered the consideration of GNSS as alternative system. In this paper, we conduct a research on trends in the field of precise approach and landing systems based on GNSS, analyze weaknesses of GNSS(jamming, fault) and consider possible solutions. Furthermore, we propose the precise approach and landing system based on GNSS to be used by the Korean military as we found it to be also suitable for military purposes. Finally, we examine the benefits of a domestic development with different focuses(development/cost of mass production/operational advantages and potential for increased performance).

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.06a
• /
• pp.228-231
• /
• 2006

This paper briefly introduces silicon based thin film solar cells: amorphous (a-Si:H), microcrystalline ${\mu}c-Si:H$ single junction and $a-Si:H/{\mu}c-Si:H$ tandem solar cells. The major difference of a-Si:H and ${\mu}c-Si:H$ cells comes from electro-optical properties of intrinsic Si-films (active layer) that absorb incident photon and generate electron-hole pairs. The a-Si:H film has energy band-gap (Eg) of 1.7-1.8eV and solar cells incorporating this wide Eg a-Si:H material as active layer commonly give high voltage and low current, when illuminated, compared to ${\mu}c-Si:H$ solar cells that employ low Eg (1.1eV) material. This Eg difference of two materials make possible tandem configuration in order to effectively use incident photon energy. The $a-Si:H/{\mu}c-Si:H$ tandem solar cells, therefore, have a great potential for low cost photovoltaic device by its various advantages such as low material cost by thin-film structure on low cost substrate instead of expensive c-Si wafer and high conversion efficiency by tandem structure. In this paper, the structure, process and operation properties of Si-based thin-film solar cells are discussed.

• Journal of Convergence for Information Technology
• /
• v.8 no.6
• /
• pp.193-199
• /
• 2018

The commonly used delivery system for online merchandise has potential problems, not only missing but also criminal case. Also, the contemporary Kiosk type approach for delivery system has some problems in an initial installation cost, expense of management system and especially security weaknesses in the wireless communication. To resolve these issues, this paper is proposing a securely unmaned smart locker system that can handle up to 64 parcels. This is easily controlled and monitored by a smartphone. In addition to the system, an algorithm is proposed to make the security of wireless communications better. Finally, a method is proposed to minimize the cost of delivery by using centralized server.

• Journal of Forest and Environmental Science
• /
• v.36 no.4
• /
• pp.298-310
• /
• 2020

Fuel management can play enormous role in fire management in tropical dry forests. However, unlike the temperate forests, knowledge on implications of different fuel management methods in tropical forests is often inadequate. In this study, the implications of prescribed burning and hand thinning treatments on implementation cost, fuel loading and post-treatment fire behaviour were tested and compared in degraded forests and teak plantations in two forest reserves of different levels of dryness in Ghana. The study found that prescribed burning was less expensive (62.02 US Dollars ha-1) than hand thinning (95.37 US Dollars ha-1). The study also indicated that the two fuel management methods were able to reduce fuel loading in degraded forests and teak plantations. However, prescribed burning was more effective in reducing fuel loading than hand thinning. While the relative change of fuel reduction was 13% higher in prescribed burning than the hand thinning in degraded forest, it was 41% higher in prescribed burning than hand thinning in teak plantations. The fire behaviour of post-treatment experimental fire was also lower in prescribed burning than the hand thinning and control plots. Fuel management, therefore, has a great potential in fire management in degraded forests and teak plantations in Ghana.

• Nuclear Engineering and Technology
• /
• v.55 no.9
• /
• pp.3301-3312
• /
• 2023

This study incorporates a high-fidelity transient analysis solver based on multigroup CMFD in the MOC code STREAM. Transport modeling with heterogeneous geometries of the reactor core increases computational cost in terms of memory and time, whereas the multigroup CMFD reduces the computational cost. The reactor condition does not change at every time step, which is a vital point for the utilization of CMFD. CMFD correction factors are updated from the transport solution whenever the reactor core condition changes, and the simulation continues until the end. The transport solution is adjusted once CMFD achieves the solution. The flux-weighted method is used for rod decusping to update the partially inserted control rod cell material, which maintains the solution's stability. A smaller time-step size is needed to obtain an accurate solution, which increases the computational cost. The adaptive step-size control algorithm is robust for controlling the time step size. This algorithm is based on local errors and has the potential capability to accept or reject the solution. Several numerical problems are selected to analyze the performance and numerical accuracy of parallel computing, rod decusping, and adaptive time step control. Lastly, a typical pressurized LWR was chosen to study the rod-ejection accident.

• Journal of Fashion Business
• /
• v.26 no.1
• /
• pp.53-67
• /
• 2022

The purpose of this study was to compare the appearance similarity between a 3D virtual wedding dress, and a model wearing real dress, and production efficiency, and the possibility of achieving similar results with 3D digital technology. Five wedding dresses for small weddings under the theme of 'Dream Series', were designed and produced in virtual and real dresses to quantitatively compare and analyze the appearance similarity and production efficiency. Experts compared the appearance similarity on the silhouettes, colors, materials, and details, and production efficiency was compared with time and cost. Based on our results, 3D virtual images of four out of the five dresses were similar to the real images. Our efficiency evaluation results showed that the manufacturing time was 45.4% shorter, and the manufacturing cost was 46.1% less than the existing method. This indicated that the wedding dress manufacturing process using 3D virtual software was time and cost saving competitive. Our results also confirmed that 3D virtual software technology has the potential to increase the efficiency of designing and production, and therefore an increase in competitiveness and sales of wedding dresses. Furthermore, 3D technology allows consumers to select and order wedding dresses online through 3D virtual software. This is a great advantage, and it highlights the significance of this research study.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.10a
• /
• pp.517-519
• /
• 2022

VR based dementia service is emerged as elderly population is increasing with potential welfare cost. Current Dementia Center cannot solve the complicated problems, including limited size, case management, medical support, medical cost and care cost, and the lack preventive environment. VR based dementia service is suggested from three reasons: First, VR shows easy access and convenience; Second, development of cognitive health is easy and fun; Third, Predictive way of cognitive decline can be possible with Big Data.

• International conference on construction engineering and project management
• /
• 2011.02a
• /
• pp.521-525
• /
• 2011

Although the Korean construction industry has risen rapidly, the quality of the buildings is not met with the industry standard compared to the potential of the technology development and the cost of maintenance has been increased. The user's request for quality have been increased, but in the current building construction, the contractors only follow the specifications of design, material and technology, and their main concern is whether they are in right track with the specification or not. Thus, the necessity of developing technology has been ignored and sufficient opportunities for the development have not been provided as well. In the developed countries, in contrast, the quality assurance and the payment regulation system has been utilized for the active response to the changes of users' request. As a result of this, the maintenance cost has been decreased and the development of construction technology has been improved. Therefore the pay adjustment system is needed to create the improvement of the quality of the buildings by the contractors' earnest building construction. In order to introduce the pay adjustment system suitable to the Korean construction industry, this study presented the logical method of adjusting the construction cost and making payment with the pay adjustment index that is created based on the result of the performance test, after making a set of the indicators of the building performance standard and applied them to the targeted building.

• Environmental and Resource Economics Review
• /
• v.22 no.3
• /
• pp.459-479
• /
• 2013

To assess the feasibility of 'low carbon, sustainable growth' policy pursued of the Chinese government, this paper first measures technical efficiency, $CO_2$ shadow prices, and indirect Morishima elasticity of substitution between capital and energy for 24 of manufacturing sectors in Beijing and Chongqing, in which China launched pilot carbon emissions trading scheme, by estimating the input distance function. Based on these results, then the potential for $CO_2$ reduction, cost savings from emissions trading, and the effectiveness of capital investment in reducing $CO_2$ are compared across industries and provinces. In 2010, manufacturing industries in Beijing and Chongqing could potentially reduce the largest $CO_2$ emissions, amounting 5.2 and 17 million tons, respectively, by achieving 100% technical efficiency. While, on average, Chongqing has a comparative advantage in the cost savings from carbon trading over Beijing, Beijing is more likely to reduce $CO_2$ by expanding capital investment.