• International Journal of Highway Engineering
• /
• v.8 no.3 s.29
• /
• pp.21-28
• /
• 2006

Field or laboratory wheel tracking tests have been employed for the evaluation of the rutting potential of asphalt paving mixtures. Compared to field tests, laboratory wheel tracking tests are much less expensive and more manageable for most road projects. However, most test laboratories are not equipped to perform such tests because there does not exist any standard test procedure, and the required equipment is rather expensive. Futhermore, the size of test specimens and the relatively large quantity of test mixture required present difficulties for laboratory specimen mixing and compaction. This paper describes a project conducted to study the feasibility of replacing wheel tracking testsby a repeated-load creep test for rutting potential evaluation. Comparisons were made between the results of the two tests for different test temperatures, loading speeds and applied pressures. Three types of asphalt mixtures were studied in the test program. Favorable conclusions concerning the use of the repeated-load test for rutting potential evaluation were drawn based on the findings of the experimental test results. The correlation between the two types of tests was found to be good for all threeasphalt mixtures. Adopting the repeated-load creep test would lead to cost savings since it employs standard test equipment already available in most laboratories. It would also result in substantial time savings due to the much smaller quantity of mix needed, and the ease in specimen preparation.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.12
• /
• pp.2113-2118
• /
• 2016

The precise detection of electric leakage point of underground power cable is very important to reduce cost and time of maintenance and prevent electric shock accident through expedite repair of electric leakage point. This paper proposes a electric leakage point detection system underground power cable using of half-period modulated transmission waveform and earth electric potential measurement. The developed system is composed of transmitter to generate the wanted pulse waveform, receiver to measure and display earth electric potential by the transmitted pulse in electric leakage point and PC Software program to display of GPS coordinate on detection cable line. The performance of the electric leakage point detection system was tested in the constructed underground cable leakage detection test bed. The test results on signal generation voltage precision of signal transmitter, mean detection earth voltage, mean detection leakage current and electric leakage point detection error showed the developed system can be used in electric leakage point detection underground power cable.

• The Journal of the Korea Contents Association
• /
• v.12 no.12
• /
• pp.797-809
• /
• 2012

Many organizations release future emerging technologies information because it is very important to companies. However, unfortunately there are few organizations who assess the emerging technologies they thought a few years ago. We made a framework for assessing the brightness of future emerging technologies rapidly and cost-effectively. We came up with 2 new concepts for it. One is product potential and the other is consumption potential. Product potential is relative probability that emerging technology is implemented to real products. It is resulted from analyzing patents related with emerging technology. Consumption potential is relative probability that consumers buy the products. The number of appearances of emerging technology in the mass media is related to consumption potential. We compared the brightness between LED and LCD technologies with proposed evaluating framework, and came to know that LCD has more brightness over LED.

• Journal of Environmental Impact Assessment
• /
• v.17 no.2
• /
• pp.133-141
• /
• 2008

The loss, alteration, and fragmentation of habitat have led to a reduction of biodiversity. The growing awareness of the negative effects of habitat fragmentation on natural systems has resulted in conservation strategy that is concerned with not only population and habitat level but also ecosystem and landscape level. Especially, ecological network to link core areas or major habitat patches is one of the most important issues. Recently, landscape connectivity is increasingly used in decision making for fragmented landscape management in order to conserve the biodiversity in the regional scale. The objective of this study was to find potential forest as a ecological corridor in Go-yang city, Gyung-gi province using cost-distance modelling method that can measure connectivity based on animal movement. 'Least cost-distance' modelling based on functional connectivity can be useful to establish ecological network and biodiversity conservation plan. This method calculates the distance modified with the cost to move between habitat patches based on detailed geographical information on the landscape as well as behavioural aspects of the animal movement. The least cost-distance models are based on two biologically assumptions: (1) dispersers have complete knowledge of their surroundings, and (2) they do select the least cost route from this information. As a result of this study, we can find wildlife moving route for biodiversity conservation. The result is very useful for long-term aspect of biodiversity conservation plan in regional scale, because this is reflection of geographical information and behavioural aspects of the animal movement.

• Archives of Plastic Surgery
• /
• v.46 no.4
• /
• pp.303-310
• /
• 2019

Background Prosthetic hands with a myoelectric interface have recently received interest within the broader category of hand prostheses, but their high cost is a major barrier to use. Modern three-dimensional (3D) printing technology has enabled more widespread development and cost-effectiveness in the field of prostheses. The objective of the present study was to evaluate the clinical impact of a low-cost 3D-printed myoelectric-interface prosthetic hand on patients' daily life. Methods A prospective review of all upper-arm transradial amputation amputees who used 3D-printed myoelectric interface prostheses (Mark V) between January 2016 and August 2017 was conducted. The functional outcomes of prosthesis usage over a 3-month follow-up period were measured using a validated method (Orthotics Prosthetics User Survey-Upper Extremity Functional Status [OPUS-UEFS]). In addition, the correlation between the length of the amputated radius and changes in OPUS-UEFS scores was analyzed. Results Ten patients were included in the study. After use of the 3D-printed myoelectric single electromyography channel prosthesis for 3 months, the average OPUS-UEFS score significantly increased from 45.50 to 60.10. The Spearman correlation coefficient (r) of the correlation between radius length and OPUS-UEFS at the 3rd month of prosthetic use was 0.815. Conclusions This low-cost 3D-printed myoelectric-interface prosthetic hand with a single reliable myoelectrical signal shows the potential to positively impact amputees' quality of life through daily usage. The emergence of a low-cost 3D-printed myoelectric prosthesis could lead to new market trends, with such a device gaining popularity via reduced production costs and increased market demand.

• Journal of Korean Biological Nursing Science
• /
• v.21 no.2
• /
• pp.133-140
• /
• 2019

Purpose: The purpose of this study was to check the degree of residual microbial contamination after disinfection of reusable suction containers, used in an intensive care unit (ICU) and present basic data for efficient use through cost analysis in comparison to disposable suction containers. Methods: This study was conducted on 32 reusable suction containers used in an ICU on a selected specific day. After disinfection and washing, specimens were collected from the used containers and cultured to check for microbial contamination. Additionally, a comparative narrative study analyzes the cost of using reusable suction containers and disposable suction containers. Data were analyzed with the SPSS WIN 20.0 program using real numbers and percentage ${\chi}^2$-test. Results: As a result of the study, microorganisms were found in all samples where in 30 were gram-positive (62.5%) while 13 were gram-negative (27.1%). Based on level of contamination, microorganisms were less than 10CFU/ml in 18 samples (56.3%); 11-99CFU/ml in six samples (18.8%); and more than 100CFU/ml in eight samples (25%). Cost per day for a reusable suction container was $10,655+{\alpha}$ while cost per day for a disposable suction container was 10,666 won. Conclusion: This study found that reusable suction containers, even after disinfection, accounted for factors of potential infection as well as microbial contamination. So, disposable suction containers are superior in cost-effectiveness and highly efficient for use with infected patients.

• Journal of the Korean Society of Safety
• /
• v.38 no.2
• /
• pp.104-111
• /
• 2023

Rolling stock maintenance, which focuses on preventive maintenance, is typically implemented considering the potential harm that may be inflicted to passengers in the event of failure. The cost of preventive maintenance throughout the life cycle of a rolling stock is 60%-75% of the initial purchase cost. Therefore, ensuring stability and reducing maintenance costs are essential in terms of economy. In particular, private railroad operators must reduce government support budget by effectively utilizing railroad resources and reducing maintenance costs. Accordingly, this study analyzes the reliability characteristics of components using field data. Moreover, it resolves the problem of determining an economical replacement interval considering the timing of scrapping railroad vehicles. The procedure for determining the optimal replacement interval involves five steps. According to the decision model, the optimal replacement interval for the onboard signal device components of the "A" line train is calculated using field data, such as failure data, preventive maintenance cost, and failure maintenance cost. The field data analysis indicates that the mileage meter is 9 years, which is less than the designed durability of 15 years. Furthermore, a life cycle in which the phase signal has few failures is found to be the same as the actual durability of 15 years.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.22 no.1
• /
• pp.84-101
• /
• 1996

To minimize the use of animals in toxicity testing, and to reduce the cost in vivo test, more rational test method was described which determines, in the same animal, photoxic and photoallergic potential of a substance, and is daptable to routine testing. The other purpose of this study was to investigate the usefulness of in vivo alternatives ; photostability and spectrophotometric carbonyl assay. In this modified photosensitization model, animal numbers and resting periods, the number and method of topical application were simplified. Two positive photoreactive agents, Benzocaine and 6-methyl coumarine, showed a similar photoallergic potential to that of Ichikawa's method. Two sunscreens, Octyl methoxy cinnamate, Butyl methoxyl dibenzoyl methane, hardly showed photoallergic potentials. The photostability test could be used in the step of prescreening of photosensitization potential because most of the photoreactive agents represented the reduction of more than 20% in the absorbance. And photoreactive agents have a high potential of photosensitization in the sddessment of spectrophotometric carbonyl level although two sunscreens have a low possibility of photosensitization. Therefore this method was assumed as a valuable in vivo alternatives in the respect even in the very low concentrations which phototoxicity test using almonella showed no phototoxic potential.

• Korean Journal of Remote Sensing
• /
• v.23 no.4
• /
• pp.287-295
• /
• 2007

A mineral potential map showing the distributions of potential areas for exploration of undiscovered mineral deposits is a kind of predictive thematic maps. For any predictive thematic maps to show reasonably significant prediction results, validation information on prediction capability should be provided in addition to spatial locations of high potential areas. The objective of this paper is to apply prediction rate curves to the estimation of prediction probability of future discovery. A case study for Au-Ag mineral potential mapping using geochemical data sets is carried out to illustrate procedures for estimating prediction probability and for an interpretation. Through the case study, quantitative information including prediction rates and probability obtained by prediction rate curves was found to be very important for the interpretation of prediction results. It is expected that such quantitative validation information would be effectively used as basic information for cost analysis of exploration and environmental impact assessment.

• Journal of the Society of Naval Architects of Korea
• /
• v.61 no.3
• /
• pp.170-184
• /
• 2024

With the advancement of autonomous navigation technology in maritime domain, there is an active research on swarming Unmanned Surface Vehicles (USVs) that can fulfill missions with low cost and high efficiency. In this study, we propose a formation control algorithm that maintains a certain shape when multiple unmanned surface vehicles operate in a swarm. In the case of swarming, individual USVs need to be able to accurately follow the target state and avoid collisions with obstacles or other vessels in the swarm. In order to generate guidance commands for swarm formation control, the potential field method has been a major focus of swarm control research, but the method using the potential field only uses the position information of obstacles or other ships, so it cannot effectively respond to moving targets and obstacles. In situations such as the formation change of a swarm of ships, the formation control is performed in a dense environment, so the position and velocity information of the target and nearby obstacles must be considered to effectively change the formation. In order to overcome these limitations, this paper applies a method that considers relative velocity to the potential field-based guidance law to improve target following and collision avoidance performance. Considering the relative velocity of the moving target, the potential field for nearby obstacles is newly defined by utilizing the concept of Velocity Obstacle (VO), and the effectiveness and efficiency of the proposed method is verified through swarm control simulation, and swarm control experiments using a small scaled unmanned surface vehicle platform.