• Radiation Oncology Journal
• /
• 제2권1호
• /
• pp.1-9
• /
• 1984

To evaluate the influence of prior heat treatment on the thermal enhancement of irradiation effect after hyperthermia, an experimental study was carried out using a total of 80 mice. Hyperthermia was carried out at $43^{\circ}C$ for 40 minutes and was repeated with various intervals. A single dose of 3,000 rad was delivered on skin of mouse tail immediately after the second hyperthermia. The skin changes of the irradiated mouse tail were observed from 7th to 35th post-irradiation days, and the skin scores were analyzed. The results are as follows, 1. The radiation damage on mouse skin increased significantly when radiation was combined with hyperthermia. 2. The radiation damage after repeated hyperthermia is significantly less than that after single hyperthermia, when the interval is 1 to 6 days. 3. As a result, thermal tolerance persists from 1 through 6 days after the initial hyperthermia.

• 한국철도학회논문집
• /
• 제12권5호
• /
• pp.725-731
• /
• 2009

강 교량, 선로 구조물, 차량 구조물 등 철도분야에서 강 재료가 많이 사용되고 있다. 설계, 강도평가, 잔존수명 평가 등을 위하여 부식된 강 재료에 대한 인장강도, 피로강도 등이 필요하지만 우리나라의 경우 이 분야의 연구가 미진하여 축적된 데이터가 많지 않다. 본 연구에서는 철도 분야에서 많이 사용되는 대표적인 강 재료에 속하는 SM490A와 SS400에 대해 대기부식 시험절차를 확립하고 많은 시편을 대기부식에 노출시켜 일정한 시간 간격으로 수거하여 인장 및 피로시험을 수행하여 부식시간의 경과에 따른 인장 및 피로강도의 변화를 측정하였다. 처음 3-4개월 기간에 피로강도가 많이 저하하였고 그 이후에는 완만히 변화하였다. 그리고 후열처리 한 시편이 부식에 대한 저항이 더 크다는 것도 알 수 있었다.

• 한국표면공학회지
• /
• 제37권3호
• /
• pp.146-151
• /
• 2004

Indium tin oxide (ITO) is widely used to make a transparent conducting film for various display devices and opto-electric devices. In this study, ITO films on glass substrate were fabricated by inductively coupled plasma (ICP) assisted dc magnetron sputtering. A two-turn rf coil was inserted in the process chamber between the substrate and magnetron for the generation of ICP. The substrates were not heated intentionally. Subsequent post-annealing treatment for as-deposited ITO films was not performed. Low-temperature deposition technique is required for ITO films to be used with heat sensitive plastic substrates, such as the polycarbonate and acrylic substrates used in LCD devices. The surface roughness of the ITO films is also an important feature in the application of OLEDs along with the use of a low temperature deposition technique. In order to obtain optimum ITO thin film properties at low temperature, the depositions were carried out at different condition in changing of Ar and $O_2$ gas mixtures, ICP power. The electrical, optical and structural properties of the deposited films were characterized by four-point probe, UV/VIS spectrophotometer, atomic force microscopy(AFM) and x-ray diffraction (XRD). The electrical resistivity of the films was -l0$^{-4}$ $\Omega$cm and the optical transmittance in the visible range was ＞85%. The surface roughness ( $R_{rms}$) was -20$\AA$.>.

• 한국양식학회지
• /
• 제8권1호
• /
• pp.21-29
• /
• 1995

수정 10분후에 수온 $28^{\circ}C$에서 15분간 처리로 산천어, Oncorhynchus masou 3배체를 유도하였다. 혈액학적 및 생리학적 특성 조사가 3배체와 2배체를 대상으로 산란기전에 실시되었다. 적혈구 수에서 3배체는 2배체에 비해 유의하게(P< 0.01) 낮은 반면 산소 소모, haematocrit치, hemoglobin, 적혈구 부피, MCH 및 MCHRBC에서는 3배체가 2배체에 비해 높게 나타났다 Total protein, albumin 및 cholesterol에서도 역시 3배체는 2배체에 비해 높게 나타났다.

• 한국세라믹학회지
• /
• 제53권6호
• /
• pp.628-634
• /
• 2016

The 8 wt% yttria($Y_2O_3$) stabilized zirconia ($ZrO_2$), 8YSZ, a typical thermal barrier coating (TBC) for turbine systems, was fabricated under different starting powder conditions and coating parameters by atmospheric plasma spray (APS) coating process. Four different starting powders were prepared by conventional spray dry method with different additive and process parameter conditions. As a result, large- and small-size spherical-type particles and Donut-type particles were obtained. Dense structure of 8YSZ coating was produced when small size spherical-type or Donut-type particles were used. On the other hand, 8YSZ coating with a porous structure was formed from large-size spherical-type particles. Furthermore, a segmented coating structure with vertical cracks was observed after post heat treatment on the surface of dense structured coating by argon plasma flame at an appropriate gun distance and power condition.

• 전기학회논문지P
• /
• 제66권2호
• /
• pp.94-97
• /
• 2017

A method of improving the anti-fouling characteristics of porcelain insulators was proposed in this study. Functional coating was performed as a method of reducing the surface contamination of the porcelain insulators. The functional coating was applied on a ceramic substrate, which has the same material as the porcelain insulators. After coating the ceramic substrate 2, 3, 4, and 5 times alternately in the horizontal and vertical directions, the surface characteristics according to the thickness of the coating film were analyzed. The optimal process was selected to coat the surfaces of the post insulators and long rod insulators, which are the representative porcelain insulators. After coating, heat treatment was performed for 1 hour at $200^{\circ}C$ in a furnace to secure the durability of the coating film. Compared to the uncoated insulators, the insulators with the functional coating showed significantly improved anti-fouling characteristics as well as excellent adhesion to the coated insulator surface.

• 대한치과의사협회지
• /
• 제15권2호
• /
• pp.121-124
• /
• 1977

The most common and the most serious complication of the burn is infection, which is to a certain extent inevitable in the light of present knowledge and experience. From the burn wound as a rule there may be cultured at any given time the prevailing flora of the individual patient and of the hospital attendants and ward environ ment. Even without contamination from outside sources, organisms embedded in hair follicles and sweat glands survive the sterilizing effects of heat and serve as potential sources of localized and systemic infection. With necrotic tissue serving as nutrient material for pathogens there may occur, in succession, cellulitis, extending necrosis, lymphangitis and final septicemia. This is to report a case of osteomyelitis due to facial burn of 32 year old Korean male. The authors treated the patient by curettage and thin split thickness skin graft. The post operative course was uncomplicated and result was excellent.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 추계학술대회 논문집
• /
• pp.107-110
• /
• 1999

The ultrasonic spray method was employed to make (Y,Gd)BO$_3$:Eu Phosphor, and its optical properties under 147nm VUV and 254 nm UV excitations were characterized and then compared with that produced by the solid-state reaction. The mixed solution of acetate hydrates of Y, Gd, Eu and boric acid diluted in water or methanol was used as the precursor fur the spray. It was found that (Y,Gd)BO$_3$:Eu phosphor made by this ultrasonic spray had a spherical shape and fine particle size of 1${\mu}{\textrm}{m}$. The crystalline structure for the as-sprayed phosphor was amorphous, but it converted into the same polycrystalline phase of solid state reaction after post heat treatment at 110$0^{\circ}C$ for 2hr. The emitting intensity under VUV and UV excitations for the spray-formed (Y,Gd)BO$_3$:Eu phosphor, however, was inferior to the later one. The excitation spectra were also studied and compared under VUV and UV excitations to explain the change of emitting intensity with Gd substitution in (Y$_{1-x}$ Gd$_{x}$)BO$_3$:Eu Phosphors made by spray and solid state reaction.on.

• Journal of Welding and Joining
• /
• 제5권3호
• /
• pp.53-61
• /
• 1987

Post weld heat treatment(PWHT) is usually carried out to remove the residual stress and to improve the microstructure and mechanical properties of welded joints. By the way, welding structure transformed owing to PWHT and reheating for repair loads the random cycles fatigue as offshore welding structure of constant low cycle fatigue as pressure vessel, and then, pre-existing flaws or cracks exist in a structural component and those cracks grow under cyclic loading. Therefore, the effects of PWHT and stress ratio on fatigue crack growth behaviors were studied on the three regions such as HAZ, sub-critical HAZ and deposit metal of welded joints in SM53 steel. Fatigue crack growth behavior of as-weld depended on microstructure and fatigue crack growth rate of HAZ was the lowest at eac region, but after PWHT it was somewhat higher than that of as-wel. In case of applying the stress($10kg/mm^2$) during PWHT, fatigue crack growth resistance tended to increase in the overall range of .DELTA.K.

• 한국입자에어로졸학회지
• /
• 제16권4호
• /
• pp.95-105
• /
• 2020

Vanadium Pentoxide (V2O5) has been emerged as alternative electrode materials for supercapacitors due to their low cost, natural abundance, and environmental friendliness. Graphene (GR) loaded with V2O5 can exhibit enhanced specific capacitance. In this study, we present three-dimensional (3D) crumpled graphene (CGR) decorated with V2O5. The V2O5-graphene composites were synthesized from a colloidal mixture of graphene oxide (GO) and Ammonium metavanadate (NH4VO3), via aerosol spray drying and post heat treatment process. The average size of composite was ranged from 1.82 to 4.6 ㎛. Morphology of the composite changed from a crumpled paper ball to spherical ball having relatively smooth surface as the content of V2O5 increased in the composites. The electrochemical performance of the V2O5-graphene composites was examined. The V2O5-graphene composite electrode showed the specific capacitance of 312 F/g. In addition, the device possessed acceptable cyclic stability, with 84% after 2000 cycles at 2 A/g. These outstanding properties are expected to make the composites prepared in this study as promising electrode materials for supercapacitor applications.