• Journal of the Korean Dietetic Association
• /
• v.15 no.2
• /
• pp.188-196
• /
• 2009

The purpose of this study was to investigate the effects of nutrition counseling on diabetes management by determining changes in anthropometry and blood components as well as knowledge and practice of diet therapy and nutrient intake in 34 (male 11, female 23) type 2 diabetes patients. The knowledge and the practice of diet therapy, drinking, smoking and exercise were analyzed by questionnaires. Dietary nutrient intake were obtained from the patients by the 1 day 24-hr recall. Blood glucose level and blood pressure were measured before and 3 months after the treatment. The results are summarized as follows: Average weight (p<0.05) and body mass index (p<0.05) were significantly lower post-counseling. Fasting blood glucose levels (p<0.01) and postprandial-2hour blood glucose levels (p<0.01) were also significantly lower post-counseling. In lifestyle changes for self-management the patients showed significantly higher exercise habits post-counseling (p<0.01). Regarding their level of diet knowledge, they showed significantly higher levels post-counseling in six items such as importance of diet therapy for diabetes (p<0.001), principles of diet therapy (p<0.001), nutrient composition of foods (p<0.01), carbohydrate composition of foods (p<0.001), the prescribed calories (p<0.001) understanding food item and exchange units of cereals, grains (p<0.001) and fruits, juices (p<0.001). Regarding their diet practices, the patients showed significantly higher levels of practice post-counseling in keeping within permitted meal size (p<0.001), using food exchange lists (p<0.001), keeping exact meal times (p<0.01), and controling sweet foods (p<0.001). Protein (p<0.05), animal lipid (p<0.05), and vitamin C (p<0.05) intakes were significantly higher post-counseling.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.41 no.8
• /
• pp.37-44
• /
• 2004

This paper describes a new GaAs-based surface-micromachined microstrip line supported by dielectric post and air-gapped signal line with ground metal. This new type of dielectric-supported air-gapped microstripline(DAML) structure is developed using surface micromachining techniques to provide easy means of airbridge connection between the signal lines and to archive low losses at millimeter-wave frequency band with wide impedance range. Each DAMLs with the length of 5 mm are fabricated and the measured characteristics are compared with those of the conventional microstrip transmission line. These transmission lines are composed of 10 ${\mu}{\textrm}{m}$ height of signal line, post size of 10 ${\mu}{\textrm}{m}$ ${\times}$ 10 ${\mu}{\textrm}{m}$ and post height of 9 ${\mu}{\textrm}{m}$. By elevating the signal lines from the substrate using the micromachining technology, the substrate dielectric loss can be reduced Compared with of the conventional microstrip transmission line showing 7.5 dB/cm loss at 50 GHz, the loss can be reduced to 1.1 dB/cm loss at 50 GHz.

• The Journal of Advanced Prosthodontics
• /
• v.16 no.2
• /
• pp.77-90
• /
• 2024

PURPOSE. The study aims to investigate the influence of the ferrule effect and types of posts on the stress distribution in three morphological types of the maxillary central incisor. MATERIALS AND METHODS. Nine models were created for 3 maxillary central incisor morphology types: "Fat" type - crown 12.5 mm, root 13 mm, and buccolingual cervical diameter 7.5 mm, "Medium" type - crown 11 mm, root 14 mm, and buccolingual cervical diameter 6.5 mm, and "Slim" type - crown 9.5 mm, root 15 mm, and buccolingual cervical diameter 5.5 mm. Each model received an anatomical castable post-and-core or glass-fiber post with resin composite core and three ferrule heights (nonexistent, 1 mm, and 2 mm). Then, a load of 14 N was applied at the cingulum with a 45° slope to the long axis of the tooth. The Maximum Principal Stress and the Minimum Principal Stress were calculated in the root dentin, crown, and core. RESULTS. Higher tensile and compression stress values were observed in root dentin using the metallic post compared to the fiber post, being higher in the slim type maxillary central incisor than in the medium and fat types. Concerning the three anatomical types of maxillary central incisors, the slim type without ferrule height in mm presented the highest tensile stress in the dentin, for both types of metal and fiber posts. CONCLUSION. Post system and tooth morphology were able to modify the biomechanical response of restored endodontically-treated incisors, showing the importance of personalized dental treatment for each case.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.44 no.3
• /
• pp.375-383
• /
• 2024

The size of the construction industry is increasing, and its impact on the entire national industry is also significant. However, construction cost increases, construction period delays, safety accidents, and quality problems occur during the construction process. This paper analyzed the construction cost, construction period, and change order performance for civil infrastructures for which post evaluation was performed. The analysis was conducted by dividing civil engineering facilities by type, construction nature, construction cost, contract nature, and delivery method. Planned and actual construction cost and period were compared during the planning, design, and construction process of civil engineering facilities. There is a possibility of input errors in project performance data, this paper proposes to the post-evaluation center should perform post-evaluation. Also, post-evaluation implementation guidelines for change orders should be revised. Additionally, further analysis of each facility was proposed through continuous data collection.

• ETRI Journal
• /
• v.36 no.2
• /
• pp.214-223
• /
• 2014

A fully-integrated penta-band reconfigurable power amplifier (PA) is developed for handset Tx applications. The output structure of the proposed PA is composed of the fixed output matching network, power and frequency reconfigurable networks, and post-PA distribution switches. In this work, a new reconfiguration technique is proposed for a specific band requiring power and frequency reconfiguration simultaneously. The design parameters for the proposed reconfiguration are newly derived and applied to the PA. To reduce the module size, the switches of reconfigurable output networks and post-PA switches are integrated into a single IC using a $0.18{\mu}m$ silicon-on-insulator CMOS process, and a compact size of $5mm{\times}5mm$ is thus achieved. The fabricated W-CDMA PA module shows adjacent channel leakage ratios better than -39 dBc up to the rated linear power and power-added efficiencies of higher than around 38% at the maximum linear output power over all the bands. Efficiency degradation is limited to 2.5% to 3% compared to the single-band reference PA.

• Physical Therapy Korea
• /
• v.22 no.2
• /
• pp.30-40
• /
• 2015

Robot-assisted rehabilitation therapy has been used to increase physical function in post-stroke patients. The aim of this meta-analysis was to identify whether robot-assisted gait training can improve patients' functional abilities. A comprehensive search was performed of PubMed, Cochrane Central Register of Controlled Trials (CENTRAL), Physiotherapy Evidence Database (PEDro), Academic Search Premier (ASP), ScienceDirect, Korean Studies Information Service System (KISS), Research Information Sharing Service (RISS), Korea National Library, and the Korean Medical Database up to April, 2014. Fifteen eligible studies researched the effects of robot-assisted gait training to a control group. All outcome measures were classified by International Classification of Functioning, Disability, and Health (ICF) domains (body function and structures, activity, and participation) and were pooled for calculating the effect size. The overall effect size of the robot-assisted gait training was .356 [95% confidence interval (CI): .186~.526]. When the effect was compared by the type of electromechanical robot, Gait Trainer (GT) (.471, 95% CI: .320~.621) showed more effective than Lokomat (.169, 95% CI: .063~.275). In addition, acute stroke patients showed more improvement than others. Although robot-assisted gait training may improve function, but there is no scientific evidence about the appropriate treatment time for one session or the appropriate duration of treatment. Additional researchers are needed to include more well-designed trials in order to resolve these uncertainties.

• 한국초전도학회:학술대회논문집
• /
• v.10
• /
• pp.262-267
• /
• 2000

To tap the possibility of exploiting the precipitates as flux-pinning center in the Bi-2223 superconducting system, as-received Bi-2223/Ag tapes with the starting composition of Bi$_{1.8}$Pb$_{0.4}$Sr$_2$Ca$_{2.2}$Cu$_3$O$_8$ were post-annealed at various temperature, oxygen partial pressure, and annealing time. The 2$^{nd}$ phases in the annealed specimen were analysed with XRD, SEM, TEM, and EDS. The size and the distribution of the precipitates such as (Ca,Sr)$_2$(Pb,Bi)O$_4$ and Bi$_{0.5}$Pb$_3$Sr$_2$Ca$_2$CuO$_{12+{\delta}}$ (3221) in the Bi-2223 matrix was controllable by varying heat-treatment condition without breaking the connectivity of the 2223 grains. The nano-size precipitates within the 2223 grains are conjectured as working as flux-pinning sites, resulting in increased J$_c$ value.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.44 no.1
• /
• pp.1-12
• /
• 2020

It is essential to apply compression bands or pressure garments that can stabilize the breast implants and breast shape as well as help shape the breast to the desired shape immediately after breast augmentation surgery. It is necessary to study the compression garment which is able to properly cover a deformed breast due to the operation and shape it as a beautiful breast. The subjects of the study were 6 women who experienced breast augmentation surgery with an under bust size of 70 or 75, cup size of C cup with a hemispherical and conical shape. We analyzed the dissatisfaction and satisfaction factors through the evaluation of the 4 types of commercial compression garments and developed the new functional post-operative bra which can be worn immediately after the operation according to the breast characteristics of breast augmentation patients. We have developed new bra patterns; a front opening type garment with wings and a band type garment both sides that allow the band to be pressed from the front center. The comparative wearing evaluation indicated that the superiority of the new compression garments also provided a higher the satisfaction of the newly developed bra (front adjustable style) than a commercial band.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.20 no.5
• /
• pp.1223-1225
• /
• 2006

The purpose of this study was to examine the effects of enlarging the breast by the B-secret I , II( vaccum vibrator) in women. This study was one group in a pre-test / post-test desgian with repeated measures. The experimental group of 30 patients were selected through sampling from L-oriental medicine in the P-city. The subjects received B-secret 1 , 11 ( vaccum vibrator) for 15 - 20minutes / 1 day during three months . All of the subjects were examined on the volume-size of the breast & the degree on the improvement. Prior and post surveys were measured before and after the experiment. The volume and size of the breast were measured the girth of the chest on the breast and below breast, the range on nipple and the middle point of the clavicle, the range on nipple and the middle point of the sternum, the range out of two nipple, the lineal and obligue line distance on nipple and the under crumples of breast, the height on the nipple and the under crumples of the breast, the diameter of the girth of nipple. As the effect on enlargement and the degree on the improvement of breast by B-secret 1 , 11 ( vaccum vibrator) were observed the girth of the chest on the breast, the range on nipple and the middle point of the clavicle, the range on nipple and the sternum, the height on the nipple and the under crumples of the breast.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.2
• /
• pp.943-952
• /
• 2021

The purpose of this study is to evaluate the effect of COVID-19 on corporate governance attributes and firm performance association. This research used a sample of 188 non-financial firms from the Malaysian market for the years 2019-2020. We found that the COVID-19 has affected all firm characteristics including firm performance, governance structure, dividend, liquidity, and leverage level, yet, the difference between prior and post COVID-19 pandemic is not significant. Also, the investigation revealed that board size exerts a significant positive impact on firm performance. After splitting the sample based on year, however, we found that board size does not matter in the uncertain time of the current crisis, while board diversity appeared to be significantly enhancing firm performance in the crisis time compared to the prior year where it has an inverse association with firm performance in both indicators. Board meetings and audit committee meetings seemed to have a significant negative influence on firm performance pre and post-COVID-19. This study contributes to the limited literature by providing the first empirical evidence on the impact of Coronavirus on the firm performance and corporate governance association.