• 제어로봇시스템학회논문지
• /
• 제15권8호
• /
• pp.845-850
• /
• 2009

Localization which estimates a robot's position and orientation in a given environment is very important for mobile robot navigation. Although low-cost sensors are preferred for practical service robots, they suffer from the inaccurate and insufficient range information. This paper proposes a novel approach to increasing the success rate of low-cost sensor-based localization. In this paper, both the previous and the current data obtained from the IR sensors are used for localization in order to utilize as much environment information as possible without increasing the number of sensors. The sensor model used in the monte carlo localization (MCL) is modified so that the accumulated range information may be used to increase the accuracy in estimating the current robot pose. The experimental results show that the proposed method can robustly estimate the robot's pose in indoor environments with several similar places.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.128.6-128
• /
• 2001

In this paper, we present a methodology of sensing and control for a robot system designed to be capable of grasping an object and moving it to target point Stereo vision system is employed to determine to depth map which represents the distance from the camera. In stereo vision system we have used a center-referenced projection to represent the discrete match space for stereo correspondence. This center-referenced disparity space contains new occlusion points in addition to the match points which we exploit to create a concise representation of correspondence an occlusion. And from the depth map we find the target object´s pose and position in 3-D space. To find the target object´s pose and position, we use the method of the model-based recognition.

• 한국정밀공학회지
• /
• 제20권2호
• /
• pp.184-191
• /
• 2003

A parallel manipulator has high stiffness and all the joint errors on the device are not accumulated at the end -effector unlike a serial manipulator. These are the reasons why the parallel manipulator has been widely used in many fields of industry. In the parallel manipulator, it is very important to predict the exact pose of the end-effector when we want to control the end-effector motion. Installation errors have to be determined in order to predict and control the actual position and pose of the end-effector. This paper presents an algorithm to find the whole 36 joint error components with joint clearance errors and measurement errors considered, when a link length measurement sensor is used and data more than 36 times are acquired for 36 different configurations. A simulation test using this algorithm is performed with a Matlab program which uses the Levenberg-Marquardt method that is known to be efficient for non-linear optimization.

• 스마트미디어저널
• /
• 제1권2호
• /
• pp.40-46
• /
• 2012

본 논문은 비전 기반 신체 제스처 인식 결과를 입력인터페이스로 사용하는 상호작용 콘텐츠에 대해 기술한다. 제작된 콘텐츠 는 아시아의 공통문화요소인 도깨비를 소재로 사용하여 지역 문화에 친숙하게 접근할 수 있도록 하였다. 그리고 콘텐츠를 구성 하는 시나리오는 도깨비와의 결투장면에서 사용자의 제스처 인식을 통해 결투를 진행하므로 사용자는 자연스럽게 콘텐츠 시나리오에 몰입할 수 있다. 시나리오의 후반부에서는 사용자는 시간과 공간이 다른 다중의 결말을 선택할 수 있다. 신체 제스처 인식 부분에서는 키넥트(KINECT)를 통해 얻을 수 있는 각 신체 부분의 3차원좌표를 이용하여 정지동작인 포즈를 활용한다. 비전기반 3차원 인체 포즈 인식 기술은 HCI(Human-Computer Interaction)에서 인간의 제스처를 전달하기 위한 방법으로 사용된다. 특수한 환경에서 단순한 2차원 움직임 포즈만 인식할 수 있는 2차원 포즈모델 기반 인식 방법에 비해 3차원 관절을 묘사한 포즈모델은 관절각에 대한 정보와 신체 부위의 모양정보를 선행지식으로 사용할 수 있어서 좀 더 일반적인 환경에서 복잡한 3차원 포즈도 인식할 수 있다는 장점이 있다. 인간이 사용하는 제스처는 정지동작인 포즈들의 연속적인 동작을 통해 표현이 가능하므로 HMM을 이용하여 정지동작 포즈들로 구성된 제스처를 인식하였다. 본 논문에서 기술한 체험형 콘텐츠는 사용자가 부가적인 장치의 사용 없이 제스처 인식 결과를 입력인터페이스로 사용하였으며 사용자의 몸동작만으로 자연스럽게 콘텐츠를 조작할 수 있도록 해준다. 본 논문에서 기술한 체험형 콘텐츠는 평소 접하기 어려운 도깨비를 이용하여 사용자와 실시간 상호작용이 가능케 함으로써 몰입도와 재미를 향상시키고자 하였다.

• 로봇학회논문지
• /
• 제10권3호
• /
• pp.171-177
• /
• 2015

A telerobot offers a more engaging and enjoyable interaction with people at a distance by communicating via audio, video, expressive gestures, body pose and proxemics. To provide its potential benefits at a reasonable cost, this paper presents a telepresence robot system for video communication which can deliver speaker's head motion through its display stanchion. Head gestures such as nodding and head-shaking can give crucial information during conversation. We also can assume a speaker's eye-gaze, which is known as one of the key non-verbal signals for interaction, from his/her head pose. In order to develop an efficient head tracking method, a 3D cylinder-like head model is employed and the Harris corner detector is combined with the Lucas-Kanade optical flow that is known to be suitable for extracting 3D motion information of the model. Especially, a skin color-based face detection algorithm is proposed to achieve robust performance upon variant directions while maintaining reasonable computational cost. The performance of the proposed head tracking algorithm is verified through the experiments using BU's standard data sets. A design of robot platform is also described as well as the design of supporting systems such as video transmission and robot control interfaces.

• 한국항공우주학회지
• /
• 제37권12호
• /
• pp.1209-1216
• /
• 2009

본 논문에서는 실내 공간에 설치된 복수의 카메라로부터 획득한 영상정보를 소형무인기의 자세 추정 및 제어에 이용하는 시스템에 대한 연구를 기술하였다. 제안된 시스템은 실외 비행시험의 제한을 극복하고 효율적인 비행시험 환경을 구축하기 위한 것으로 무인기의 위치 및 자세를 측정하기 위해 별도의 센서를 탑재할 필요가 없어 저가의 장비로 테스트베드를 구성할 수 있다는 장점을 갖는다. 시스템 구현을 위해 요구되는 카메라 보정, 마커 검출, 자세 추정 기법을 소개하였으며 테스트베드를 이용한 실험 결과를 통해 제안된 방법의 타당성 및 성능을 보였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.783-788
• /
• 2003

In this paper, we present a new approach to detect and recognize human face in the image from vision camera equipped on the mobile robot platform. Due to the mobility of camera platform, obtained facial image is small and pose-various. For this condition, new algorithm should cope with these constraints and can detect and recognize face in nearly real time. In detection step, ‘coarse to fine’ detection strategy is used. Firstly, region boundary including face is roughly located by dual ellipse templates of facial color and on this region, the locations of three main facial features- two eyes and mouth-are estimated. For this, simplified facial feature maps using characteristic chrominance are made out and candidate pixels are segmented as eye or mouth pixels group. These candidate facial features are verified whether the length and orientation of feature pairs are suitable for face geometry. In recognition step, pseudo-convex hull area of gray face image is defined which area includes feature triangle connecting two eyes and mouth. And random lattice line set are composed and laid on this convex hull area, and then 2D appearance of this area is represented. From these procedures, facial information of detected face is obtained and face DB images are similarly processed for each person class. Based on facial information of these areas, distance measure of match of lattice lines is calculated and face image is recognized using this measure as a classifier. This proposed detection and recognition algorithms overcome the constraints of previous approach [15], make real-time face detection and recognition possible, and guarantee the correct recognition irregardless of some pose variation of face. The usefulness at mobile robot application is demonstrated.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.901-905
• /
• 2005

Monte Carlo localization is known to be one of the most reliable methods for pose estimation of a mobile robot. Much research has been done to improve performance of MCL so far. Although MCL is capable of estimating the robot pose even for a completely unknown initial pose in the known environment, it takes considerable time to give an initial estimate because the number of random samples is usually very large especially for a large-scale environment. For practical implementation of the MCL, therefore, a reduction in sample size is desirable. This paper presents a novel approach to reducing the number of samples used in the particle filter for efficient implementation of MCL. To this end, the topological information generated off- line using a thinning method, which is commonly used in image processing, is employed. The topological map is first created from the given grid map for the environment. The robot scans the local environment using a laser rangefinder and generates a local topological map. The robot then navigates only on this local topological edge, which is likely to be the same as the one obtained off- line from the given grid map. Random samples are drawn near the off-line topological edge instead of being taken with uniform distribution, since the robot traverses along the edge. In this way, the sample size required for MCL can be drastically reduced, thus leading to reduced initial operation time. Experimental results using the proposed method show that the number of samples can be reduced considerably, and the time required for robot pose estimation can also be substantially decreased.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.84.3-84
• /
• 2002

$\textbullet$ iconic localization method $\textbullet$ initial robot pose estimation $\textbullet$ genetic algorithms $\textbullet$ map matching

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 26-27 Oct. 1990
• /
• pp.613-617
• /
• 1990

This paper presents a method of calculating the position and orientation of a polyhedron arbitrarily placed in 3-D space using two cameras. We use key feature of the object and CAD data to solve the correspondence problem between two cameras' images.