• Journal of the Korean Society of Industry Convergence
• /
• v.22 no.5
• /
• pp.575-582
• /
• 2019

Advanced driving assist system can support safety of driver and passengers which may require vehicle dynamics states as well as road geometry. It is essential to have in real-time estimation of related variables and parameters. Among the road geometry parameters, road slope angle which can not be measured is essential parameter in pose estimation, adaptive cruise control and others on sag road. In this paper, Kalman filter based method for the estimation of the vehicle dynamics and road slope angle using a nonlinear vehicle model is proposed. It uses a combination of Kalman filter as Cascade Extended Kalman Filter. CEKF uses measured vehicle states such as yaw rate, longitudinal/lateral acceleration and velocity. Unknown vehicle parameters such as center of gravity and inertia are obtained by 2 D.O.F lateral model and experimentally. Simulation and Experimental tests conducted with commercialized vehicle dynamics model and real-car.

• Electronics and Telecommunications Trends
• /
• v.34 no.3
• /
• pp.114-124
• /
• 2019

The Internet was designed for machines, not humans, and hence, nobody owns a digital identity. Instead, a digital identity is rented from a website and an application. This lack of unique and secure digital identities has resulted in confusion in the online/cyber world. Digital identities pose one of the oldest and most difficult problems with regard to the Internet. There is still no way to use digital credentials to prove, own, and control an online identity, namely a self-sovereign identity, in the same manner we do in the offline world, particularly without a trusted third party. This article discusses the current open standards for digital identities, proposes solutions pertaining to digital identities in the future, and introduces the concept of a blockchain-based self-sovereign digital identity without the need of trusted third parties.

• Journal of Trauma and Injury
• /
• v.33 no.4
• /
• pp.269-274
• /
• 2020

Open pelvic fractures are rare, but pose challenges for trauma surgeons due to their high morbidity and mortality. Generally, early death results from uncontrolled exsanguination and late death is related to pelvic sepsis. Therefore, management of these injuries should prioritize hemostasis and contamination control starting in the initial phase of treatment. We report two cases of unstable open pelvic fractures with perineal wounds that were managed successfully.

• Journal of Drive and Control
• /
• v.17 no.4
• /
• pp.72-79
• /
• 2020

To ensure the safety of Advanced Driver Assistance Systems (ADAS) or autonomous vehicles, it is important to recognize the vehicle position, and specifically, the increased accuracy of the lateral position of the vehicle is required. In recent years, the quality of GPS signals has improved a lot and the price has decreased significantly, but extreme urban environments such as tunnels still pose a critical challenge. In this study, we proposed stable and precise lane recognition and tracking methods to solve these two issues via fusion of AVM images and vehicle sensor data using an extended Kalman filter. In addition, the vehicle's lateral position recognition and the abnormal state of RTK GPS were determined using this approach. The proposed method was validated via actual vehicle experiments in urban areas reporting multipath and signal disconnections.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2022.11a
• /
• pp.812-814
• /
• 2022

제어할 사물을 선택하기 위해 여러 단계를 거쳐야 하는 기존 '스마트 홈'의 단점을 보완하고자 본 논문에서는 사용자의 시선 방향을 추정하여 사용자가 바라보는 방향에 있는 사물을 제어할 수 있는 시스템을 제안한다. 일반 RGB 카메라를 통해 Pose Estimation으로 추출한 Landmark들의 좌표 값을 이용하여 시선 방향을 추정하는 알고리즘을 구현하였으며, 이는 근적외선 카메라와 Gaze Tracking 모델링을 통해 이루어지던 기존의 시선 추적 기술에 비해 가벼운 데이터를 산출하고 사용자와 센서간의 위치 제약이 적으며 별도의 장비를 필요로 하지 않는다. 해당 알고리즘으로 산출한 시선 추적의 정확도가 실제 주거환경에서 사용하기에 실효성이 있음을 실험을 통해 입증하였으며, 최종적으로 이 알고리즘을 적용하여 적외선 기기와 Google Home 제품에 사용할 수 있는 시선 방향 사물 제어 시스템을 구현하였다.

• Mycobiology
• /
• v.51 no.5
• /
• pp.333-342
• /
• 2023

Phytophthora species, classified under Oomycota, cause significant damage to various crops and trees. The present study introduced Phytophthora species, P. nagaii and P. tentaculata, new to Korea, which pose notable risks to their respective host plants. Our research provided a comprehensive description of these species taking into account their cultural features, morphological characteristics, and molecular phylogenetic analysis using the internal transcribed spacer rDNA region and cytochrome c oxidase subunit mtDNA genes (cox1 and cox2) sequences. In addition, this study first evaluated the sensitivity of P. nagaii and P. tentaculata to five anti-oomycete fungicides, finding both species most responsive to picarbutrazox and P. tentaculata resistant to fluazinam. The data can guide targeted treatment strategies and offer insights into effective control methods. The findings expand our understanding of the diversity, distribution, and management of Phytophthora species in Korea.

• Analytical Science and Technology
• /
• v.37 no.1
• /
• pp.1-11
• /
• 2024

In agricultural households cultivating vegetables and fruits, the use of various pesticides to protect crops from diseases and pests or to control weeds is widely practiced enhancing quality and productivity. However, pesticides can pose a threat to consumer health by remaining on the food surface or migrating into the food interior. Households commonly peel off skins, wash with water, or use chemical methods to remove foreign substances including residual pesticides on the food surface. In this study, we measured the washing rate by comparing the pesticide concentrations before and after washing in the leafy vegetable perilla leaves and the fruits strawberries and apples, which were intentionally exposed to pesticides. We compared washing rates using tap water, a baking soda solution, and a commercially available food-specific cleaning solution. The target pesticides for analysis were azoxystrobin, bifenthrin, boscalid, difenoconazole, flubendiamide, and indoxacarb, and the residual pesticide analysis was performed using GC-MS/MS or LC-MS/MS. The removal rates of pesticides were highest with the food-specific cleaner, followed by baking soda and tap water in order.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.301-303
• /
• 2018

This paper describes a robot control system and control method of a human arm type redundant manipulator. The control of a redundant manipulator suffer from computational complexity and singularity problem because of numerical inverse kinematics. To deal with such problems, analytical methods for a redundant robot arm have been researched to enhance the performance of inverse kinematics. In this research, we propose a numerical control method and weighted pseudo inverse kinematics algorithm. Using this algorithm, it is possible to generate a trajectory passing through the singular points and intuitively move the elbow without regard to the end-effector pose. Performance of the proposed algorithm was verified by various simulations. It is shown that the trajectory planning and using this algorithm provides correct results near the singular points and can utilize redundancy intuitively. We proved this system's validity through field test.

• Journal of Institute of Control, Robotics and Systems
• /
• v.19 no.8
• /
• pp.738-744
• /
• 2013

According to the cognitive science research, the interaction intent of humans can be estimated through an analysis of the representing behaviors. This paper proposes a novel methodology for reliable intention analysis of humans by applying this approach. To identify the intention, 8 behavioral features are extracted from the 4 characteristics in human-human interaction and we outline a set of core components for nonverbal behavior of humans. These nonverbal behaviors are associated with various recognition modules including multimodal sensors which have each modality with localizing sound source of the speaker in the audition part, recognizing frontal face and facial expression in the vision part, and estimating human trajectories, body pose and leaning, and hand gesture in the spatial part. As a post-processing step, temporal confidential reasoning is utilized to improve the recognition performance and integrated human model is utilized to quantitatively classify the intention from multi-dimensional cues by applying the weight factor. Thus, interactive robots can make informed engagement decision to effectively interact with multiple persons. Experimental results show that the proposed scheme works successfully between human users and a robot in human-robot interaction.

• Journal of Institute of Control, Robotics and Systems
• /
• v.9 no.4
• /
• pp.304-309
• /
• 2003

Uninterrupted power supply has become indispensable during the maintenance task of active electric power lines as a result of today's highly information-oriented society and increasing demand of electric utilities. The maintenance task has the risk of electric shock and the danger of falling from high place. Therefore it is necessary to realize an autonomous robot system. In order to realize these tasks autonomously, the three dimensional position of target object such as electric line and the stand of insulator must be recognized accurately and rapidly. The approaching of an insulator and the wrenching of a nut task is selected as the typical task of the maintenance of active electric power distribution lines in this paper. Image recognition by multilayer neural network and optimal target position calculation method are newly proposed in order to recognize the center 3 dimensional position of the bolt hole in the stand of insulator. By the proposed image recognition method, it is proved that the center 3 dimensional position of the bolt hole can be recognized rapidly and accurately without regard to the pose of the stand of insulator. Finally the approaching and wrenching task is automatically realized using 6-link electro-hydraulic manipulators.