• The Journal of the Convergence on Culture Technology
• /
• v.9 no.2
• /
• pp.227-233
• /
• 2023

Along with the 4th Industrial Revolution, the impact of "unmanned" is affecting all fields around the world, and in particular, in the military sector, "unmanned" is so important that it occupies a part of the main combat system. Recently, the South Korean military is facing a crisis due to the North Korea's UAV incident that invaded our airspace and descended to Seoul. In response, the South Korea military declared its willingness and countermeasures to capture and destroy North Korea's UAV. However, as the technological development of UAV continues and the utilization plan is expanding, the countermeasures for UAV at the current level can be useless. Also, the threat from North Korea is not just UAV. North Korea has practically a nuclear power and is set to conduct its seventh nuclear test, and its missile technology is also being advanced, with 38 arounds of 67 missile tests conducted in 2022 alone. It is also developing five key strategic weapons that can pose a fatal threat to Korea, and North Korea's strong conventional forces are located around the NLL(Northern Limit Line), and the port of Long Range Artillery is facing the Seoul metropolitan area. It is important to respond to North Korea's UAV threats, which are now receiving much attention, but it will be necessary to comprehensively analyze and clearly prioritize North Korea's threats and use a limited budget to respond to them.

• The Journal of Korean Society for Radiation Therapy
• /
• v.17 no.1
• /
• pp.19-31
• /
• 2005

Purpose : To supply the information of EPID system and to analyze the possibility of substitution EPID for film dosimetry. Materials & Methods : With amorphous silicon(aSi) type EPID and liquid filled lonization chamber(LC) type EPID, the reproducibility according to focus detector distance(FDD) change and gantry rotation was analyzed, and also the possible range of image acquisition was analyzed with Alderson Rando phantom. The resolution and the contrast of aSi type EPID image were analyzed through Las Vegas phantom and water phantom. DMLC image was analyzed with X-Omat V film and EPID to see wether it could be applied to the qualify assurance(QA) of IMRT. Results : The reproducibility of FDD position was within 1mm, but the reproducibility of gantry rotation was ${\pm}2,\;{\pm}3mm$ respectively. The resolution and the contrast of EPID image were affected by dose rate, image acquisition time, image acquisition method and frame number. According to the possible range of image acquisition of EPID, it is verified that the EPID is easier to use than film. There is no difference between X-Omat V film and EPID images for the QA of IMRT. Conclusion : Through various evaluation, we could obtain lots of useful information about the EPID. Because the EPID has digital data, also we found that the EPID is more useful than film dosimerty for the periodical Qualify Assurance of IMRT. Especially when it is difficult to do point dose measurement with diode or ionization chamber, the EPID could be very useful substitute. And we found that the diode and ionization chamber are difficult to evaluate the sliding window images of IMRT, but the EPID was more useful to do it.

• Journal of Korean Academy of Nursing
• /
• v.23 no.3
• /
• pp.467-486
• /
• 1993

Today, more chronically ill and handicapped people are being cared for at home by a family member caregiver. The task of caring for a family momber may mean that the caregiver has less time and money and more work which may result in increased fatigue and symptoms of illness. This study was done to examine the well-being of family caregivers. Fifty three family caregivers were interviewed. Concepts were measured using existing tools and included : Burden(25 item 5 point scale), Social sup-port (21 item 7 point scale), Health status defined by a symptom checklist(48 item S point scale), and Well -being defined by a quality of life scale (14 item 7 point scale) and caregiving activities. Data collection was done by interview and Q-sort. Social support and well - being were positively correlated as were symptoms and burden. Symptoms and burden were negatively correlated with social support and well-being. Items on the quality of life scale had a mean score range from 3.09 to 4.96. Quality of life related to income was lowest (3.09) but the desire to use more money for the patient was rated 2.90 on the burden scale where the item means ranged from 0.73 to 3.55. The high mean of 3.55 was for obligation to give care and the low 0.73 was (or not feeling that this was helping the patient. Mean scores for symptoms ranged from 0.26 to 2.15 with the 2.15 being for “worry about all the things that have to be done.” Over half of the patients were dependent for help with some activities of daily living. The caregivers reported doing an average of 3.40 out of five patient care activities including bathing (77.4%), shampooing (67.9%), and washing face and hands (49.1％), and 3.74 out of seven home maintenance activities including laundry (98.1％), cooking (83.0%), and arranging bed-ding(75.5%). The caregivers reported their spouse as one of the main sources of social support, including in times of loneliness and anger The mean score for loneliness as burden was 2.15 and ranked fourth and 31 (58.5％) of the sample reported being lonely recently and not being satisfied with the support received. Similarly anger caused by the patient was given a mean score of 2.13, and anger was reported to have been present recently by 38 (71.7%) of the sample and satis-faction with the support given was low. Having someone to help deal with anger ranked twelfth out of 21 items on the social support scale and had a mean score of 3.98 (range 3.49 to 5.98). Spouses were reported as a major source of social support but the fact that 50% of the caregivers were caring for a spouse, may account for the quality of this source of social support having been affected. These caregivers faced the same problems as others at the same stage of life. but because of the situation, there was a strain on their resources, particularly financial and social. In conclusion it was found that burden is correlated negatively to quality of life and positively to symptoms, but in this sample, symptoms and bur-den were scored relatively low. Does this indicate that the caregivers accept caregiving as part of their destiny and accept the quality of their lives with burden and symptoms just being a part of caregiving\ulcorner Does the correlation between the bur-den and symptoms indicate they are a measure of the same phenomenon or that the sample was of a more mobile, less burdened group of caregivers\ulcorner Quality of life was the one variable that was significant in explaining the varience on burden. Further study is needed to validate the conclusions found in this study but they indicate a need for nurses to ap-proach these caregivers with a plan tailored to each individual situation and to give consideration to interventions directed at improving quality of life and expanding social support networks for those caring for spouses.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.23 no.2
• /
• pp.76-90
• /
• 2018

To determine the distribution of mercury (Hg) in the coastal surface sediments around the Korean peninsula, the baseline concentration of Hg was estimated, the extent of contamination was assessed, and the factors controlling the distribution were discussed. The concentrations of Hg in surface sediments were significantly high in Jinhae-Masan Bay in the South Sea, Ulsan-Onsan Bay and Yeongil Bay in the East Sea, but Hg in other sediments showed a similar distribution to Cs and relatively very low concentration between 0.21 and $39.5{\mu}g/kg$ ($13.6{\pm}7.80{\mu}g/kg$). Compared to the sediment quality guidelines in Korea, 8 % of the surface sediments (n=282) analyzed in this study exceeded the values of the threshold effects level (TEL), and six sediments collected around Onsan Port were higher than the value of the probable effects level (PEL). The contamination levels of Hg were assessed by the enrichment factors using the baseline concentration (2.06Cs+1.75) based on the residual analysis from the linear regression line for Cs, and further, factors controlling the distribution of Hg were discussed by the comparison with geochemical substances depending upon the Hg enrichment level. Hg concentrations were correlated well with Cs concentration in the range of less than 1.69 of EF implying grain size control, while in the range of 1.69 and 4.03 Hg concentrations were correlated well with Fe oxyhyroxide and organic carbon contents, which indicates Hg was enriched by superior sorption capability. On the meanwhile, samples with higher EFs (4.03 to 74.9) showed fairly positive correlations with other metals (Cu, Zn, Pb) rather than geochemical substances. For samples in Youngil Bay and Ulsan-Onsan Bay (n=30), Hg concentrations were correlated only with other metals rather than geochemical substances implying simultaneous supply of metal particles from metal refineries. But samples at Gosung, Sokcho and Uljin coast were correlated well with organic carbon even though they had high EFs. In addition, samples in Jinhae-Masan Bay with high contents of S were enriched by relatively high sulfide formation.

• Journal of IKEEE
• /
• v.27 no.1
• /
• pp.122-126
• /
• 2023

In this paper, a control system for a complex microbial incubator was proposed. The proposed control system consists of a control unit, a communication unit, a power supply unit, and a control system of the complex microbial incubator. The controller of the complex microbial incubator is designed and manufactured to convert analog signals and digital signals, and control signals of sensors such as displays using LCD panels, water level sensors, temperature sensors, and pH concentration sensors. The water level sensor used is designed and manufactured to enable accurate water level measurement by using the IR laser method with excellent linearity in order to solve the problem that existing water level sensors are difficult to measure due to foreign substances such as bubbles. The temperature sensor is designed and used so that it has high accuracy and no cumulative resistance error by measuring using the thermal resistance principle. The communication unit consists of two LAN ports and one RS-232 port, and is designed and manufactured to transmit signals such as LCD panel, PCT panel, and load cell controller used in the complex microbial incubator to the control unit. The power supply unit is designed and manufactured to supply power by configuring it with three voltage supply terminals such as 24V, 12V and 5V so that the control unit and communication unit can operate smoothly. The control system of the complex microbial incubator uses PLC to control sensor values such as pH concentration sensor, temperature sensor, and water level sensor, and the operation of circulation pump, circulation valve, rotary pump, and inverter load cell used for cultivation. In order to evaluate the performance of the control system of the proposed complex microbial incubator, the result of the experiment conducted by the accredited certification body showed that the range of water level measurement sensitivity was -0.41mm~1.59mm, and the range of change in water temperature was ±0.41℃, which is currently commercially available. It was confirmed that the product operates with better performance than the performance of the products. Therefore, the effectiveness of the control system of the complex microbial incubator proposed in this paper was demonstrated.

• Journal of Chest Surgery
• /
• v.39 no.5 s.262
• /
• pp.387-393
• /
• 2006

Background: Esophageal perforation is an uncommon problem, but it is associated with high mortality. We performed a retrospective review of patients with instrumental esophageal perforation to assess the outcome of current management techniques. Material and Method: We retrospectively analyzed all cases of instrumental esophageal perforation diagnosed at our hospital from January 1999 through to March 2005. The study group consisted of 12 patients (8 women and 4 men) with a mean age of 48.8 years (range, $21{\sim}83$ years). We reviewed the effects of the surgical or medical treatments in various conditions of patients, such as of various sites of perforation and time delayed after injury. Result: Perforations were due to diagnostic endoscopy (50.0%, 6/12), esophageal bougination for benign stricture (33.3%, 4/12), endoscopic port insertion (8.3%, 1/12), and tracheal intubation (8.3%, 1/12). The perforated sites were thoracic in 7 patients and cervical in 5. The treatment included resection and reconstruction (5 cases), incision and drainage (4 cases), medical treatment (2 cases), and closed thoracostomy drainage only (1 case). Post-operative complications of transient pneumonia and wound infection were developed in 1 patient respectively. Both occurred in two patients with diffuse mediastinal abscess formation. The overall mortality was 8.3% (1/12) in one old patient who was managed medically for cervical esophageal perforation. Conclusion: We concluded that surgical treatment for esophageal perforations was safe and effective whether diagnosed early or lately.

• The Journal of Korean Society for Radiation Therapy
• /
• v.17 no.2
• /
• pp.133-140
• /
• 2005

Purpose : This test is designed to identify the validity of treatment plan by implementing real-time dosimetry by means of dose that is absorbed into PTV and OAR when preparing doses of 3D and POP plans. Materials and Methods : In treatment. error can be calculated be comparing Exp. Dose with the actual dose, which has been converted from 'the reading value obtained by placing diode detector on the area to be measured'. Same test can be repeated using Alderson-Rando phantom. Results : Errors were found: A patient(POP plan): 197.6/199=-1.2%, B patient(3D-plan): 199.9/198.7=+0.6%, C patient: 196/200=-1.5%. In addition, considering the resulted value of measuring OAR besides target-dose for C patient showed 96/200, representing does of 47%, the purpose of protection was judged to be duly accomplished. Also it was acknowledged the resulted value of -3.7% met the targeted dose within the range of ${\pm}5%$. Conclusion : Aimed for identifying the usefulness of pre-treatment dose measurement using diode detector, this test was useful to evaluate the validity of curing because it resulted in the identification of category to be protected as well as t dose. Moreover, it is thought to have great advantage in ascertaining the dose of target, dose of which is not calculated yet. Similar to L-gram before treatment, this test is thought to be very effective so that it can bring great advantages in the aspects such as validity of curing method and post-treatment plan as well.

• Journal of the Korean association of regional geographers
• /
• v.4 no.1
• /
• pp.77-98
• /
• 1998

In general, spatial imbalance in regional growth is a major cause of social and political conflicts within a state. In Korea, this inequality has functioned as a threat to the state's integration. With the economic development policies by regional industrialization over the past three decades, most of the industrial activities have been concentrated in Seoul and Pusan metropolitan areas, which are surrounded by Kyonggi, Kyongnam provinces respectively. Compared to these areas, Chonnam and Chonbuk provinces have lagged behind in economic development. Therefore, in order to increase the regional economic development of the southwestern region in Korea, the central government has been enforcing several policies aimed at regional industrialization since the 1980s. The purpose of this study focuses on the regional economic impacts of a newly established industrial estate-Yulchon industrial complex- which would act as a regional growth center in the Kwangyang bay area. The Kwangyang bay area consists of several industrial estates such as Kwangyang Iron and Steel Co. and its related industrial complex, Chuam rural industrial estate, Yeochon industrial complex, and so on. In addition, the Kwangyang container port was constructed in 1997. The Kwangyang bay area has been changing to a new industrial district in the southwestern part of Korea as a result of industrialization policies which were activated by central government. The Yulchon industrial complex, which is expected to be completed in 2001, would draw many manufacturing plants. For example, Hyundai Motors Co. has a plan to locate a new automobile assembly plant within the estate. As the plan has high probability to be realized, it will be interesting to study the effects a new automobile assembly plant and its related production linkages have on the region. This study is to estimate the expected structural characteristics of automobile production activities in Yulchon. The following details will be discussed: the regional economic impacts of a new automobile industry in Yulchon industrial complex, the production linkage formation via hierarchical subcontracting systems, the alternative strategies to promote the growth of regional economies, and the scheme to improve the auto-parts and components industry in Kwangju and Chonnam provinces by establishing auto-mobile production function. Automoblie industry generally gives great influences on not only regional economies but the related industries, for example, the firms producing automotive components. If a new plant producing automobiles and its related firms producing components are to be established in Yulchon, they will affect on the regional development directions and change the regional characteristics of industrial structure. In order to increase the spread effects of the new industry in Yulchon industrial complex, almost all of the automobile production processes must be organized concurrently within a limited range of distance. There is an imperative that the co-operation system should be structured between the assembly firm and many firms producing its components. In addition to those, it would be required such as the effective division of labors between the firms, much more capabilities in the technical innovations, and the reconstruction of interrelationship between the labor unions and the firms' managers.

• Restorative Dentistry and Endodontics
• /
• v.32 no.1
• /
• pp.19-27
• /
• 2007

The purpose of this study is to develope new dental color-space system. Twelve kinds of dental composites and one kind of dental porcelain were used in this study. Disk samples (15 mm in diameter, 4 mm in thickness) of used materials were made and sample's CIE $L^*a^*b^*$ value was measured by Spectrocolorimeter (MiniScan XE plus, Model 4000S, diffuse/$8^{\circ}$ viewing mode, 14.3 mm Port diameters, Hunter Lab USA) The range of measured color distribution was analyzed. All the data were applied in the form of T### which is expression unit in CNU Cons Dental Color Chart. The value of $L^*$ lies between 80.40 and 52.70. The value of $a^*$ are between 10.60 and 3.60 and $b^*$ are between 28.40 and 2.21. The average value of $L^*$ is 67.40, and median value is 67.30. The value of $a^*$ are 2.89 and 2.91 respectively. And for the $b^*$, 14.30 and 13.90 were obtained. The data were converted to T### that is the unit count system in CNU-Cons Dental Color Chart. The value of $L^*$ is converted in the first digit of the numbering system. Each unit is 2.0 measured values. The second digit is the value of $a^*$ and is converted new number by 1.0 measured value. For the third digit $b^*$ is replaced and it is 2.0 measured unit apart. T555 was set to the value of $L^*$ ranging from 66.0 to 68.0, value of $a^*$ ranging from 3 to 4 and $b^*$ value ranging from 14 to 16.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.28 no.6
• /
• pp.256-268
• /
• 2016

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2015. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering were carried out in the areas of flow, heat and mass transfer, cooling and heating, and air-conditioning, the renewable energy system and the flow inside building rooms. Research issues dealing with air-conditioning machines and fire and exhausting smoke were reduced. CFD seems to be spreading to more research areas. (2) Research works on heat transfer area were carried out in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the economic analysis of GHG emission, micro channel heat exchanger, effect of rib angle on thermal performance, the airside performance of fin-and-tube heat exchangers, theoretical analysis of a rotary heat exchanger, heat exchanger in a cryogenic environment, the performance of a cross-flow-type, indirect evaporative cooler made of paper/plastic film. In the area of pool boiling and condensing, the bubble jet loop heat pipe was studied. In the area of industrial heat exchangers, researches were performed on fin-tube heat exchanger, KSTAR PFC and vacuum vessel at baking phase, the performance of small-sized dehumidification rotor, design of gas-injection port of an asymmetric scroll compressor, effect of slot discharge-angle change on exhaust efficiency of range hood system with air curtain. (3) In the field of refrigeration, various studies were carried in the categories of refrigeration cycle, alternative refrigeration/energy system, system control. In the refrigeration cycle category, a cold-climate heat pump system, $CO_2$ cascade systems, ejector cycles and a PCM-based continuous heating system were investigated. In the alternative refrigeration/energy system category, a polymer adsorption heat pump, an alcohol absorption heat pump and a desiccant-based hybrid refrigeration system were investigated. In the system control category, turbo-refrigerator capacity controls and an absorption chiller fault diagnostics were investigated. (4) In building mechanical system research fields, eighteen studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, and renewable energies, piping in the buildings. Proposed designs, performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings. (5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the user and location awareness technology applied dimming lighting control system, the lighting performance evaluation for light-shelves, the improvement evaluation of air quality through analysis of ventilation efficiency and the evaluation of airtightness of sliding and LS window systems. The subjects of building energy were worked on the energy saving estimation of existing buildings, the developing model to predict heating energy usage in domestic city area and the performance evaluation of cooling applied with economizer control. The studies were also performed related to the experimental measurement of weight variation and thermal conductivity in polyurethane foam, the development of flame spread prevention system for sandwich panels, the utilization of heat from waste-incineration facility in large-scale horticultural facilities.