• Journal of the Korean GEO-environmental Society
• /
• v.4 no.3
• /
• pp.79-88
• /
• 2003

This paper presents a numerical study of the spatial behavior of a linear absorbing solute in a heterogeneous porous medium. The spatially correlated log-normal hydraulic conductivity field is generated in a given two-dimensional domain by using the geostatistical method (Turning Bands algorithm). The velocity vector field is calculated by applying the two-dimensional saturated groundwater flow equation to the Galerkin finite element method. The simulation of solute transport is carried out by using the random walk particle tracking model with CD(constant displacement) scheme in which the time interval is automatically adjusted. In this study, the spatial behavior of a solute is analyzed by the longitudinal center-of-mass displacement, longitudinal spatial spread moment and longitudinal plume skewness.

• Journal of the Korean Institute of Gas
• /
• v.23 no.5
• /
• pp.24-34
• /
• 2019

In this study, the experimental studies were conducted to analyzing characteristics of combustion and flame stabilizing according to with and without water tube in boiler. The burner has consisted of SiC foam where has the location of submerged flame between a ceramic board acting as flash-back arrestor. Porous burner is also insulated to minimize heat loss in the radial direction. In the condition of fixed equivalence ratio, the flame mode was divided into three stability zones by the flow rate. The main factor for blow-off and flash-back depends on mixture flow rate. Consequently, the case of burner with water-tube has higher NOx emissions than without case. This result explains that the presence of water-tube makes the heat loss resistant to ambient temperature with increasing of NOx. This tendency was proved by predicting the relationship between O₂ emission and NO production rate, and by analysing temperature profiles.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.4
• /
• pp.358-367
• /
• 2013

In the present paper, we apply a porous modelling technique to accurately predict the pressure drop through the strainer by replacing all or some of the filter composed of perforated plates with porous media and there imposing the streamwise and transverse loss coefficients required according to the Forchheimer law and then confirm its effectiveness. At first, the streamwise coefficient is obtained by performing a simple simulation on the pipe flow mimicking the hole flow. Subsequently, the transverse coefficient is obtained by setting a unit pattern to have common flow loss characteristics with the repeated shape patterns in the filter, then performing numerical simulations on the prototype and porous model of the unit shape pattern, and finally comparing their results of pressure drop. To validate the applied modeling technique, we perform the numerical simulation with the two specified loss coefficients on a whole shape of strainer and compare the modeling results with those of the corresponding prototype numerical simulation. Comparison indicates that the modeling technique can predict the pressure drop and flow characteristics comparatively accurately and save the number of nodes closely related to the computational cost (CPU and memory) by about 3~4 times compared with the prototype simulation.

• Journal of the Korean Ceramic Society
• /
• v.39 no.8
• /
• pp.801-806
• /
• 2002

The decomposition and/or conversion of carbon dioxide to carbon have been studied using oxygen-deficient ferrites for the reduction of $CO_2$ emission to the atmosphere. In this work, the homogeneous precipitation method using urea decomposition was employed to induce in situ precipitation of Ni ferrite($Ni_{0.4}Fe_{2.6}O_4$) on the porous ceramic fiber support (50 mm diameter${\times}$10 mm thickness). Effects of ferrite loading conditions on the CO2 decomposition efficiency were discussed in this paper. Removal of residual chloride ions and urea by solvent exchange from the porous media after ferrite deposition apparently helps to form spinel ferrite, but does not increase the efficiency of $CO_2$ decomposition. Porous ceramic fiber composites containing 20 wt% (1g) ferrite samples showed 100% efficiency for $CO_2$decomposition during the first three minutes, but the efficiency decreased rapidly after the elapsed time of ten minutes. The characteristic reduction time for the $CO_2$ decomposition efficiency was estimated as about 3∼7 min.

• Journal of Korean Society of Water and Wastewater
• /
• v.21 no.1
• /
• pp.47-55
• /
• 2007

The waste water treatment facility at rural and mountainous region in catchment areas of dams should be small scale. The wastewater treatment facility of small scale has some specification as follows;1)simple process, 2)low maintenance cost, and 3)high removal efficiency. So, we developed the bioreactor which can be satisfied with the specification of small scale waste water treatment facility. The bioreactor consisted of the anoxic and oxic zone. The two zones were effectively separated by cone type baffle. By the effective separation through CTB, the nitrification and denitrification reaction occurred effectively. Therefore, the removal efficiency of total nitorgen (TN) increased compared to other types of baffle. And, we put into the bio activated media in oxic zone to increase the concentration and activity of microbiology. The media contained the components which were made of many kinds of the minerals to increase the activity of microbiology. Additionally, we observed that the phosphate removal efficiency increased by bio activated media. This is resulted from the coagulation-sedimentation reaction by mineral in components. The average removal efficiencies of TN and TP during Run 2 were 69 and 89% which were 4 and 25% higher than those during Run 1 without the MA, respectively. For BOD, COD, SS and TKN, the average removal efficiencies at Run 2 were slightly higher than those at Run 1. Therefore, we could maintain the high concentration and high activity of microbiology through bioreactor developed in this study. And the removal efficiency of TN and TP increased.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.7 no.4
• /
• pp.98-109
• /
• 2004

This study was conducted to develop revegetation methods for the restoration of the steep slopes by recycling of bark compost and mushroom media. In general, bark compost and mushroom media can be used as soil media for the restoration works, because they can increase infiltration of rainfall and give enough porous to breathe and elongate for the root growth as well as environmental value. This experiment was carried out to know the effect of soil media composed by different ratio of mushroom media for the restoration of steep rock-exposed slopes, and to certificate how soil media(PEC) will be effective to germinate and grow for native plants. The main results of the study are summarized as follows; 1. In percent coverage, the soil media PEC1 is more valuable than PEC2. The seed mixtures recommended by Government of Transportation and Construction can be used at PEC1 and PEC2, but it will be more useful if the total amount of seed are reduced and seed mixtures are altered in a direction of native plants. 2. The soil media is under 20 mm tested by Yamanaka Hardiness Tester which is available for the seed germination and growth. 3. The surface cracks are not occurred in PEC1 and PEC2, but more than 30 cracks per 1 square meter are occurred at soil media which is constructed by normal soil-seed-fertilizer hydro-seeding methods. 4. The soil moisture contents are over 20 percent level during 15 day. Such moisture content in soil media will be effective for the plant growth. By using Terra-Control, PEC can maintain enough soil moisture. 5. The eroded soils from $60^{\circ}$ slopes by artificial rainfall with the intensity of 20 mm/hr in one day after seeding are estimated under 1%. By the results of erosion test, it comes to the conclusion that soil media of PEC can be adapted at steep rock exposed slopes.

• KSBB Journal
• /
• v.15 no.3
• /
• pp.285-292
• /
• 2000

Support media for yeast immobilization was prepared from a porous volcanic rock used as a moisturizer in orchid growing. The rock was broken to the size of 2-3 mm and burned at $600^{\circ}C$ in a furnace in order to remove organic materials blocking the pores or treated with HCI solution or NaOH solution to remove the inorganic dirts by dissolving. Even through both the acid and the akali solution were effective the latter was not recommendable because it broke the pore structure by dissolving the elements of the media. This media was mainly consisted of SiO2 with $Al_2O_3$ as a minor component and CaO and K2O as trace elements. It had the finely developed pores of $15-80\mu\textrm{m}$size. Yeast immobilization capacity of this media was about $5{\times108}$ cells/ml bed which is large enough to be used for the practical applications. Yeast immobilization capacities of Alumina and Cordierite were much smaller than that of silica-based media. Scanning electron micrograph of Cordierite and Alumina showed uneven surfaces and small size of pores in contrast to relatively smooth surface and large pores of silica based media which means that smooth surface and large pores are desirable for the good adsorption of microbes on the media.

• Economic and Environmental Geology
• /
• v.44 no.2
• /
• pp.161-170
• /
• 2011

The multiphase flow simulator, CHEMPS, was developed based on the fractional flow approach reported in the petroleum engineering literature considering fully three phase flow in physically and chemically heterogeneous media. It is a extension of MPS developed by Suk and Yeh (2008) to include the effect of wettability on the migration of NAPL. The fractional flow approach employs water, total liquid saturation and total pressure as the primary variables. Most existing models are limited to two-phase flow and specific boundary conditions when considering physically heterogeneous media. In addition, these models focused mainly on the water-wet media. However, in a real system, variations in wettability between water-wet and oil-wet media often occur. Furthermore, the wetting of porous media by oil can be heterogeneous, or fractional, rather than uniform due to the heterogeneous nature of the subsurface media and the factors that affect the wettability. Therefore, in this study, the chemically heterogeneous media considering fractional wettability as well as physically heterogeneous media were simulated using CHEMPS. In addition, the general boundary conditions were considered to be a combination of two types of boundaries of individual phases, flux-type and Dirichlet type boundaries.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.17 no.2
• /
• pp.73-80
• /
• 2009

Biofilters use porous solid media to support microorganisms and allow access to the contaminants in the airflow. The characteristics of media used in biofilters vary greatly, and therefore it is important to select the appropriate media in order to obtain a large enough surface attachment area and uniform pore. This study was performed to compare hydrogen sulfide ($H_2S$) removal efficiencies of three biofilter media; coconut fiber, ceramic, and polyurethane. The biofilter packed with coconut fiber showed stable removal activity when inlet loading was changeable, and was restored rapidly when the moisture content decreased. However, the coconut fiber suffered from low durability. To cope with this problem a media of fibrinous polypropylene was developed to strengthen the durability of the coconut fiber. Biofilter column experiments using the fibrinous polypropylene media demonstrated over 99% of removal efficiencies at pH as low as 3 and 6 seconds of EBRT (empty bed gas residence time). Due to its superior physical characteristics, it is expected that the $H_2S$ treatment performance will increase when the new fibrinous polypropylne media is applied in commercial biofilter systems.

• Journal of Environmental Science International
• /
• v.20 no.7
• /
• pp.873-879
• /
• 2011

Adsorption experiment of carbon dioxide was performed on MCM41 silica impregnated with two kinds of EDA(ethylenediamine) and MEA(monoethanolamine). The prepared adsorbents were characterized by BET surface area, X-ray diffraction and FT-IR. The $CO_2$ capture study was investigated in a U type packed column with GC/TCD. The results of XRD for MCM-41 and amine-impregnated MCM41 showed typical the hexagonal pore system. BET results showed the MCM 41 impregnated amine to have a surface area of 141 $m^2/g$ to 595 $m^2/g$ and FT-IR revealed a N-H functional group at about 1400$cm^{-1}$ to 1600$cm^{-1}$. The $CO_2$ adsorption capacity on EDA and MEA was as follow: MCM41-EDA30 > MCM41 -EDA40 >MCM41-EDA20 >MCM-EDA10 and MCM41-MEA40 >MCM41-MEA30 > MCM41-MEA20> MCM41-MEA10. The MCM41-EDA30 showed the highest adsorption capacity due to physical adsorption and chemical adsorption by amino-group content. The results suggest that mesoporous media with EDA is effective adsorbent for $CO_2$ capture from flue gases.