• Environmental Engineering Research
• /
• 제16권4호
• /
• pp.219-225
• /
• 2011

The objective of this study was to investigate the bacterial adhesion to iron (hydr)oxide-coated sand (IHCS) and aluminum oxidecoated sand (AOCS) in the presence of Tween 20 (nonionic surfactant) and lipopeptide biosurfactant (anionic surfactant) through column experiments. Results show that in the presence of Tween 20, bacterial adhesion to the coated sands was slightly decreased compared to the condition of deionized water; the mass recovery (Mr) increased from 0.491 to 0.550 in IHCS and from 0.279 to 0.380 in AOCS. The bacterial adhesion to the coated sands was greatly reduced in lipopeptide biosurfactant; Mr increased to 0.980 in IHCS and to 0.797 in AOCS. Results indicate that the impact of lipopeptide biosurfactant on bacterial adhesion to metal oxide-coated sands was significantly greater than that of Tween 20. Our results differed from those of the previous report, showing that Tween 20 was the most effective while the biosurfactant was the least effective in the reduction of bacterial adhesion to porous media. This discrepancy could be ascribed to the different surface charges of porous media used in the experiments. This study indicates that lipopeptide biosurfactant can play an important role in enhancing the bacterial transport in geochemically heterogeneous porous media.

• 공업화학
• /
• 제20권6호
• /
• pp.586-592
• /
• 2009

나노 크기의 배향성을 갖는 구조물의 제작은 자연에 존재하는 여러 가지 형상의 모방을 가능하게 한다. 고분자는 가격이 매우 저렴하며 합성과 가공 그리고 그 구조가 잘 알려져 있는 장점을 갖고 있어 필름(film)의 표면에 이러한 나노 구조물을 제작하고 나노 구조의 특성을 발현하는데 손쉽게 활용할 수 있는 재료이다. 나노 구조물을 제작하는 방법 중 양극산화를 통하여 제작한 다공성 알루미나 템플레이트(porous alumina template)는 매우 규칙적으로 정렬되어 있고 제어하는 공정이 비교적 쉽고 경제적이기 때문에 이를 이용한 연구가 매우 활발하게 진행되고 있다. 본 총설에서는 양극산화 알루미나 템플레이트의 제작과 이를 이용한 나노 구조 고분자 필름의 제작을 설명하고 이러한 나노 구조 필름의 응용범위 및 응용에 필요한 특성에 대하여 기술하였다.

• 센서학회지
• /
• 제22권2호
• /
• pp.144-149
• /
• 2013

In this research, we developed a biosensor to detect lung cancer-specific biomarker using Anodic Aluminum Oxide (AAO) chip based on interference and nano surface plasmon resonance (nanoSPR). The nano-porous AAO chip was fabricated $2{\mu}m$ of pore-depth by two-step anodizing method for surface uniformity. NanoSPR has sensitivity to the refractive index (RI) of the surrounding medium and also provides simple and label-free detection when specific antibodies are immobilized to the Au-deposited surface of nano-porous AAO chip. To detect the lung cancer-specific biomarker, antibodies were immobilized on the surface of the chip by Self Assembled Monolayer (SAM) method. Since then lung cancer-specific biomarker was applied atop the antibodies immobilized layer. The specific reaction of the antigen-antibody contributed to the change in the refractive index that cause shift of resonance spectrum in the interference pattern. The Limit of Detection (LOD) was 1 fg/ml by using our nano-porous AAO biosensor chip.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.658-658
• /
• 2013

Graphene is an attractive material for various device applications due to great electrical properties and chemical properties. However, lack of band gap is significant hurdle of graphene for future electrical device applications. In the past few years, several methods have been attempted to open and tune a band gap of graphene. For example, researchers try to fabricate graphene nanoribbon (GNR) using various templates or unzip the carbon nanotubes itself. However, these methods generate small driving currents or transconductances because of the large amount of scattering source at edge of GNRs. At 2009, Bai et al. introduced graphene nanomesh (GNM) structures which can open the band gap of large area graphene at room temperature with high current. However, this method is complex and only small area is possible. For practical applications, it needs more simple and large scale process. Herein, we introduce a photosensitive graphene device fabrication using CdSe QD coated nano-porous graphene (NPG). In our experiment, NPG was fabricated by thin film anodic aluminum oxide (AAO) film as an etching mask. First of all, we transfer the AAO on the graphene. And then, we etch the graphene using O2 reactive ion etching (RIE). Finally, we fabricate graphene device thorough photolithography process. We can control the length of NPG neckwidth from AAO pore widening time and RIE etching time. And we can increase size of NPG as large as 2 $cm^2$. Thin CdSe QD layer was deposited by spin coatingprocess. We carried out NPG structure by using field emission scanning electron microscopy (FE-SEM). And device measurements were done by Keithley 4200 SCS with 532 nm laser beam (5 mW) irradiation.

• 공업화학
• /
• 제9권7호
• /
• pp.1030-1035
• /
• 1998

본 연구에서는 시판용 99.8% 금속알루미늄을 황산전해액에서 정전류 방식에 막을 제조하는 실험을 하였다. 반응온도 $20^{\circ}C$에서 $150C/cm^2$의 전기량으로 양극산화를 함에 있어 전해질에 의한 막의 용해작용을 저하시킬 목적으로 전해질 속에 알루미늄 이온의 형태로 존재할 수 있는 $Al_2(SO_4)_3$, $AlPO_4$, $Al(NO_3)_3$를 첨가제로 사용하였다. 황산 전해질의 농도를 5, 10, 15, 20 wt%로 전류밀도를 10, 20, 30, 40, $50mA/cm^2$로 조절하여 양극산화를 할 때 각 전해조에 첨가제를 각각 5, 10, 15, 20 g/L를 용해시켜 막제조에 따른 첨가제의 종류 및 양의 영향을 고찰하고자 하였다. 전해질과 공통이온으로 존재하는 $Al_2(SO_4)_3$를 첨가제로 사용하여 양극산화를 하여 막 표면에 손상이 없는 다공성 알루미나 막을 얻을 수 있었으며, 그 외 첨가제에서는 각 실험조건에서 막의 표면이 심하게 손상되어 첨가제로서 효과를 얻을 수 없었다. 한편, 동일한 전해질의 농도, 전류밀도 조건에서 $Al_2(SO_4)_3$의 첨가량에 따른 세공직경의 변화는 거의 없는 것으로 나타났다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2016년도 추계학술대회 논문집
• /
• pp.190.1-190.1
• /
• 2016

봉공처리법은 다공성 알루미나를 제조 후에 내마모성의 증가, 침지된 염료의 봉인 등을 필요로 하여 이용하는 후처리 공정 중 하나이다. 상업적으로는 물 봉공처리나 니켈-아세트산 용액을 이용한 봉공처리를 주로 이용하지만 고온을 필요로 하거나 인체에 유독한 용액을 사용, 혹은 추가적인 봉공처리를 해주어야 한다는 단점들을 가지고 있다. 이에 본 연구에서는 독성이 적고 상온에서도 다공성 알루미나와 쉽게 반응할 수 있는 알루미늄 음이온 용액을 봉공처리에 이용하였다. 알루미늄 음이온 용액을 이용한 봉공처리는 알루미늄의 양극 산화를 진행한 이후에 알루미늄 음이온을 포함한 봉공처리제를 제조 후, 침지 처리하는 방식으로 봉공처리하였다. 봉공처리제의 pH 변화, 온도 변화, 침지 시간 등의 변수 요소에 따라서 최적화를 진행하였으며, 이 용액으로 봉공처리가 가능한지 주사 전자 현미경 분석을 통해 평가하였다. 이후 최적화된 조건과 기존에 상업적으로 사용하던 봉공처리법을 거친 후에 경도, 부식전위 검사, 내화학성 검사를 통해 성능의 변화를 확인하였으며 광전자 분광기를 통해 성분과 메카니즘을 예측하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1493-1494
• /
• 2011

CdS nanostructure materials have been fabricated in porous anodic aluminum oxide (AAO) template by using chemical bath deposition (CBD). These nanostructure materials had uniform diameters of about 15e200 nm, which correspond to the pore sizes of the templates used, and the length was up to 40 mm. X-ray diffraction (XRD) investigation demonstrates that CdS nanostructure materials were hexagonal polycrystalline in nature. As the pore diameter of AAO templates was enlarged, the preferential orientation of c-axis was improved. From PL analysis, the sulfur-deficient defects at the surfaces of CdS nanostructure materials were increasedwhen the samplewas synthesized in the template with larger pore diameter.

• 한국분말재료학회지
• /
• 제22권3호
• /
• pp.216-220
• /
• 2015

Vertically oriented nickel nanowire arrays with a different diameter and length are synthesized in porous anodic aluminium oxide templates by an electrodeposition method. The pore diameters of the templates are adjusted by controlling the anodization conditions and then they are utilized as templates to grow nickel nanowire arrays. The nickel nanowires have the average diameters of approximately 25 and 260 nm and the crystal structure, morphology and microstructure of the nanowires are systematically investigated using XRD, FE-SEM and TEM analysis. The nickel nanowire arrays show a magnetic anisotropy with the easy axis parallel to the nanowires and the coercivity and remanence enhance with decreasing a wire diameter and increasing a wire length.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.697-700
• /
• 2002

Porous anodic aluminum oxide(AAO) templates prepared by anodizing method were used for growing multiwalled carbon nanotubes(CNTs). AAO templates with the homogeneous pore diameter and length were obtained by two step anodizing technique. Using AAO templates, vertically well-ordered two-dimensional carbon nanotube arrays were fabricated. We investigated the field emission property of CNTs grown using different catalyst metals in vacuum chamber (<$10^{-7}$ Torr) on AAO Template. To explain the different emission property, the surface reaction between catalysts and alumina pores which inserted carbon species of $C_2H_2$ using High resolution transmission electron microscopy (HRTEM) was studied.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.569-569
• /
• 2014

The interior vehicle noise due to the exterior aerodynamic field is an important topic in the acoustic design of a car. The air flow detached from the A-pillar and impacting the side windows are of particular interest as they are located close to the driver / passenger and provides a lower insulation index than the trimmed car body parts. This paper presents a numerical analysis method for a simplified vehicle model. The internal air cavity including trim component are included in the simulation. The car body includes the windshield and two side windows. The body is made of aluminum and trimmed with porous layers. The methodology proposed in this paper relies on two steps: the first step involves the computation of the exterior flow and turbulence induced non-linear acoustic field using CFD Code. The second step consists in the computation of the vibro-acoustic transmission through the window using the finite element vibro-acoustic solver Actran.