• Transactions on Electrical and Electronic Materials
• /
• 제4권3호
• /
• pp.25-28
• /
• 2003

Radiation technology is an effective way for regulating polymeric materials to physicochemical and mechanical properties. New polymeric hydrogels based on vinyl ethers have been synthesized by the $\gamma$-initiated polymerization method. In this paper, we have studied the effect of radiation on mechanical and electrochemical properties of new rubber-like polymeric composite materials based on polyvinylether of ethyleneglycol (PVEEG).

• Geomechanics and Engineering
• /
• 제23권2호
• /
• pp.179-187
• /
• 2020

Freezing-thawing cycles have significant effect on soils engineering behavior in frozen areas. This effect is more considerable in fine-graded than coarse-grained soils. The objective of this study is improving soil durability and strength in continues freezing-thawing cycles. For getting this purpose mixture of Polyvinyl Acetate (PVAc) and Ethylene Glycol Monobutyl Ether (EGBE) has been added to fine-grained soil and final prepared samples were tested at different freezing-thawing cycles. PVAc was mixed with 1%, 2% and 3% of soil weight. Half of PVAc weight was used as weight of EGBE. Freezing-Thawing cycles were exposed to samples and they were tested at different cycles. Results showed that adding mixture of PVAc+EGBE improved strength and durability of samples up to 10 freezing-thawing cycles. Unconfined compress strength tests were applied to samples and stress and strain of samples were tested on failure time. Behavior of samples was different at different percentages of mixture. Results showed that increasing amount of PVAc from 1% to 2% had more considerable effect on final stress than 2% to 3%. Using higher percentages of PVAc + EGBE mixture leaded to that samples carried more strain before collapsing. Another result gained from tests was that, freezing-thawing effect was more considerable after fourth cycles. It means differences between first and fourth cycles were more considerable than differences between fourth and tenth.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2003년도 춘계종합학술대회
• /
• pp.762-765
• /
• 2003

에틸렌글리콜(ethyleneglycol)을 이용한 폴리비닐에테르(polyvinyl ether)와 같은 고분자물질을 활용하여 Co$^{30}$ 방사선원으로부터 ${\gamma}$선을 조사시켜, 고분자 물질의 성질을 변화시킴으로써 화학, 전기전자, 환경 및 기타 여러 가지 응용분야에 적용하여 이용할 수 있는 기술을 개발하였다. 이를 바탕으로 관련재료의 단량체(monomer)로부터 중합체(polymer)를 합성하여 water swelling을 시키는 과정에서 각종 (금속) 이온을 흡입-제거하는 방법의 환경복원기술, 흡입 금속이온을 표면에 밀집시켜 금속막을 형성하는 응용기술, 생체조직의 대용물질로 활용하는 의용공학 및 열감지특성(thermal sensitive property) 또는 pH 감지특성(pH sensitive property)을 이용하여 의용기술에 적용하는 polymer 응용기술 등의 폭넓은 활용을 위하여 그 일환으로 전도성 고분자 제조기술로의 활용가능성을 연구하였다.

• 반도체디스플레이기술학회지
• /
• 제5권1호
• /
• pp.39-43
• /
• 2006

The polyvinyl series organic films as gate insulators of thin film transistor(TFT) have been processed and characterized on the polyether sulphone (PES) substrates . The poly-4-vinyl phenol(PVP) and polyvinyl toluene (PVT) were used as solutes and propylene glycol monomethyl ether acetate(PGMEA) as a solvent in the formation of organic insulators. The cross-linking of organic insulators was also attempted by adding the thermosetting material, poly (melamine-co-formaldehyde) as a hardener in the compound. The electrical characteristics measured in the metal-insulator-metal (MIM) structures showed that insulating properties of PVP layers were generally superior to those of PVT layers. Among the layers of PVP series; copolymer PVP(10 wt%), 5wt% cross-linked PVP(10 wt%), copolymer PVP(20 wt%), 5 wt% cross-linked PVP(20 wt%) and 10 wt% cross-linked PVP(20 wt%), the 10 wt% cross-linked PVP(20 wt%) layer showed the lowest leakage current of 1.2 pA at ${\pm}10V$. The ms value of surface roughness and the capcitance per unit area are 2.41 and $1.76nF/cm^2$ in the case of 10 wt% cross-linked PVP(20 wt%) layer, respectively.

• 마이크로전자및패키징학회지
• /
• 제12권4호통권37호
• /
• pp.359-363
• /
• 2005

유기 박막트랜지스터 (OTFT)를 제작하기 위하여 게이트 절연막으로서 PVP 계통의 유기막을 갖는 MIM(metal-insulator-metal)구조의 유기 절연층 소자를 제작하였다. 유기 절연층의 형은 ITO/Glass 기판위에 polyvinyl 계열의 PVP(poly-4-vinylphenol)를 용질로, PGMEA (propylene glycol monomethyl ether acetate)를 용매로 사용하여 co-polymer PVP를 제조하였다. 또한 열경화성 수지인 poly(melamine-co-formaldehyde)를 경화제로 사용하여 cross-linked PVP 절연막을 합성하였다. 유기 절연층의 전기적 특성은 co-polymer PVP 소자에 비해 cross-link 방식으로 제조된 소자에서 약 300 pA의 낮은 누설전류와 상대적으로 낮은 잡음전류의 특성을 나타내었다. 또한 cross-linked PVP 절연막에서 보다 양호한 표면형상 (거칠기)이 관찰되었으며 정전용량 값은 약 0.11${\~}$0.18 nF의 값을 나타내었다.

• 한국식품과학회지
• /
• 제42권1호
• /
• pp.8-13
• /
• 2010

캔제품 중 Biphenol A diglycidyl ether(BADGE), bisphenol F diglycidyl ether(BFDGE) 및 그 분해산물인 BADGE $H_2O$, BADGE $2H_2O$, BADGE HCl, BADGE 2HCl, BADGE HCl $H_2O$, BFDGE $H_2O$, BFDGE $2H_2O$, BFDGE HCl, BFDGE 2HCl, BFDGE HCl $H_2O$ 등의 HPLC/FLD와 HPLC/APCI-MS에 의한 정성 및 정량방법을 확립하고 133개 캔 제품을 사용하여 분석방법의 재현성을 검토하였다. 수용성 식품의 경우 BADGE $2H_2O$가 13개 제품에서 0.400-0.888 mg/kg, BADGE HCl $H_2O$가 1개 제품에서 0.566 mg/kg, BFDGE $H_2O$가 3개 제품에서 0.489-0.664 mg/kg, BFDGE $2H_2O$가 3개 제품에서 0.455-0.846 mg/kg, BFDGE HCl $H_2O$가 2개 제품에서 0.455-0.752 mg/kg의 농도로 검출되었다. 지용성 식품의 경우에는 BADGE가 3개 제품에서 0.093-0.486 mg/kg, BADGE $H_2O$가 1개 제품에서 0.183 mg/kg, BADGE HCl이 1개 제품에서 0.097 mg/kg, BADGE 2HCl이 7개 제품에서 0.200-0.452 mg/kg, BFDGE가 3개 제품에서 0.438-0.506 mg/kg, BFDGE $2H_2O$가 1개 제품에서 0.295 mg/kg, BFDGE HCl 및 BFDGE 2HCl이 1개 제품에서 0.324 mg/kg의 농도로 검출되었다. 분석방법의 재현성은 우수하였고, 모니터링 결과는 EU 수준과 유사하거나 안전한 수준으로 나타났다.

• 한국응용과학기술학회지
• /
• 제23권2호
• /
• pp.169-176
• /
• 2006

Acrylic adhesives for automobiles protection were prepared by emulsion polymerization. Monomers used were n-butyl acrylate(BA), acrylonitrile (AN), butyl methacrylate(BMA), glycidyl methacrylate(GMA), and acrylic acid (AA). Emulsifiers used were sodium lauryl sulfate and polyoxyethylene lauryl ether, which are an anionic emulsifier and a nonionic emulsifier respectively. Potassium persulfate was used as an initiator and polyvinyl alcohol was used as a stabilizer. Emulsion polymerization was carried out in a semi-batch reactor at $70^{\circ}C$ and agitation speed was kept at 200 rpm. Water resistance, heat resistance, acid resistance, alkali resistance and smoke resistance were examined. As a result, when each 0.03 mole of GMA and AA was introduced, the adhesion properties and various above mentioned resistances of the prepared adhesives were satisfied the standard for automobiles.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.742-745
• /
• 2001

Plastics are one of difficult materials for recycling due to their characteristics in use. Recycling ratio of waste plastics was around 40% in last year in Japan, which includes energy recovery. Feed stock recycling and mechanical recycling are not easy because of additives in commercial plastics. Then, pyrolysis treatments have been done to recovery energy. Although plastics are easy to fire, complete combustion of them is not easy if anti-firing agents are added especially. Therefore, researches on pyrolysis or combustion behaviors of plastics containing additives are important from a view point recycling of plastics. Direct observation of popular plastics like polystyrene (PS), polycarbonate (PC), polyphenyle ether (PPE) and polyvinyl chloride (PVC) to investigate their pyrolysis behaviors in the present study. In case of PS, melting and gas evolution started at 9$0^{\circ}C$ and 39$0^{\circ}C$ respectively. And combustion finished at 445$^{\circ}C$. On the other hand, more than $600^{\circ}C$ and sufficient oxygen are required for complete combustion of PC and PPE.

• 한국응용과학기술학회지
• /
• 제22권4호
• /
• pp.332-338
• /
• 2005

This study was conducted to prepare acrylic removable protective coatings by emulsion polymerization. Monomers used were n-butyl acrylate, acrylonitrile, butyl methacrylate. Emulsifiers used were sodium lauryl sulfate and polyoxyethylene lauryl ether, which are an anionic emulsifier and a nonionic emulsifier respectively. Potassium persulfate was used as an initiator and polyvinyl alcohol was used as a stabilizer. Emulsion polymerization was carried out in a semi-batch reactor at $70^{\circ}C$ and agitation speed was 200 rpm. Tensile strength, extension, peel strength, viscosity, and solid contents of the synthesized coatings were examined. The coatings prepared with BA:AN = 60:20 (in weight ratio) satisfied the standard for automobile in terms of extension and peel strength. When the concentration of BMA was in a range of $18{\sim}23$ wt%, the prepared coatings satisfied the standard for automobile in terms of peel strength and water resistance.

• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2005년도 추계 학술대회
• /
• pp.83-88
• /
• 2005

유기 절연층을 갖는 유기 박막트랜지스터 (organic TFT)를 제작하여 소자 성능을 조사하였다. 유기 절연층의 형성에서는 polyvinyl 계열의 PVP(poly-4-vinylphenol)와 PVT(polyvinyltoluene)를 용질로, PGMEA (propylene glycol mononethyl ether acetate)를 용매로 사용하였다. 또한, 열경화성 수지인 poly(melamine-co-formaldehyde)를 경화제로 사용하여 유기 절연층의 cross-link 를 시도하였다. MIM 구조로 유기 절연층의 특정을 측정한 결과, PVT는 PVP에 비해 절연 특성이 떨어지는 경향을 보였다. 게이트 절연막의 제작에서 PVP를 cobpolymer 방식과 cross-linked 방식으로 실험 해 본 결과, cross-link 방식에서 낮은 누설전류 특성을 나타내었다. OTFT 제작에서는 PVP를 용질로, poly(melanine-co-formaldehyde)를 경화제로 사용한 cross-linked PVP 를 게이트 절연막으로 이용하였다. PVP copolymer($20\;wt\%$)에 $10\;wt\%$ poly(melamine- co-formaldehyde)를 혼합한 cross-linked PVP 를 게이트 절연막으로 사용하여 top contact 구조의 OTFT를 제작한 결과 약 $0.23\;cm^2/Vs$의 정공 이동도와 약 $0.4{\times}10^4$의 평균 전류점멸비를 나타내었다.